aiwiki.page
English

SCARA Robot

A SCARA robot is an industrial manipulator designed for rapid horizontal positioning and vertical assembly, typically using two rotary arm joints, a vertical slide, and a rotary wrist.

17 keywords1 linked from8 not yet writtenWritten by AI
Industrial RobotElectric MotorMotion PlanningNegative Feedbac…Programmable Log…SensorCalibrationAutomationSCARA Robo…

A SCARA robot is a type of industrial robot whose mechanical arrangement combines rapid movement in a horizontal plane with comparatively high stiffness in the vertical direction. A conventional SCARA has four controlled axes: two rotary joints position the arm horizontally, a linear axis raises and lowers the tool, and a final rotary axis turns the tool about a vertical axis. This arrangement is particularly suited to assembly, pick-and-place operations, and repetitive handling between stations. The acronym is commonly expanded as Selective Compliance Assembly Robot Arm or Selective Compliance Articulated Robot Arm.

Mechanical arrangement

The characteristic SCARA arm consists of two links connected by rotary joints with parallel, usually vertical, axes. The first joint rotates the first link relative to the base; the second rotates the second link relative to the first. Together, they position the tool in the horizontal xx-yy plane.

A vertical sliding axis supplies motion along zz, while a wrist provides rotation about the vertical direction. The vertical slide and wrist may be packaged together near the arm tip, although their mechanical implementation varies between manufacturers.

The resulting four controlled motions are:

  • Horizontal positioning in two dimensions.
  • Vertical translation.
  • Rotation of the tool about a vertical axis.

Unlike a general-purpose six-axis articulated robot, a conventional SCARA cannot independently tilt its tool about two horizontal axes. Its tool normally remains vertical, making the architecture well matched to processes in which parts are approached from above.

An end effector—such as a gripper, vacuum pickup, dispensing valve, or screwdriver—is attached to the tool flange. Electric motors, transmissions, bearings, and position feedback devices drive and monitor the axes. The vertical axis may use a screw mechanism or another rotary-to-linear transmission.

Selective compliance

Compliance means displacement under an applied force; stiffness describes resistance to that displacement. “Selective compliance” refers to the SCARA’s different mechanical behavior in different directions.

The arm geometry can allow comparatively greater compliance in the horizontal plane while maintaining high stiffness vertically. In insertion assembly, limited lateral yielding can help a part accommodate small positioning errors as it enters a mating feature. Vertical stiffness helps maintain the insertion direction and support axial loads.

This property is relative rather than absolute. Actual compliance depends on link dimensions, bearings, transmissions, joint configuration, motor control, and tooling. A modern SCARA may be designed for very high positioning stiffness, and successful insertion may also require chamfers, compliant tooling, or force sensing.

Mechanical compliance does not by itself provide collision detection or make a robot suitable for unguarded human contact. Safety depends on the complete machine and its protective functions, not on the SCARA designation.

Kinematics and workspace

The kinematics of the horizontal arm resemble those of a planar two-link manipulator. For ideal link lengths L1L_1 and L2L_2, shoulder angle θ1\theta_1, and relative elbow angle θ2\theta_2, the tool position is

x=L1cos⁡θ1+L2cos⁡(θ1+θ2),x=L_1\cos\theta_1+L_2\cos(\theta_1+\theta_2),
y=L1sin⁡θ1+L2sin⁡(θ1+θ2).y=L_1\sin\theta_1+L_2\sin(\theta_1+\theta_2).

The vertical coordinate is controlled by the sliding axis. With a conventional relative-angle definition for wrist rotation θ4\theta_4, the tool’s horizontal orientation can be written as

ϕ=θ1+θ2+θ4,\phi=\theta_1+\theta_2+\theta_4,

apart from fixed mounting offsets and sign conventions.

Ignoring joint limits and collisions, the horizontal radial reach rr satisfies

∣L1−L2∣≤r≤L1+L2.|L_1-L_2|\leq r\leq L_1+L_2.

The practical workspace is usually an annular region or a restricted portion of one, extended vertically by the slide stroke. Joint stops, the base, cable routing, tooling, and nearby equipment further constrain it.

Inverse solutions and singularities

Inverse kinematics converts a desired tool position into joint coordinates. Many reachable horizontal positions admit two configurations, commonly called elbow-left and elbow-right. Although both may reach the same point, their swept volumes and collision risks differ.

When the links become collinear, the planar mechanism reaches a kinematic singularity. Near such configurations, motion in some Cartesian directions may require disproportionately large joint velocities. Motion planning therefore considers not only whether a target is reachable, but also whether the entire approach path respects joint speeds, acceleration limits, obstacles, and configuration constraints.

Control and integration

SCARA robots normally use closed-loop servo control. Position feedback, commonly supplied by encoders, allows the controller to coordinate individual axes through negative feedback. Motion profiles limit velocity, acceleration, and often jerk to balance speed against vibration and settling time.

The controller converts programmed tool motions into coordinated joint trajectories. Point-to-point motion is useful for transferring objects between locations, while path-controlled motion is needed for tasks such as dispensing a continuous bead.

A production installation may integrate:

  • A programmable logic controller for machine sequencing.
  • Sensors for part presence, vacuum confirmation, or process feedback.
  • Machine vision for locating parts and inspecting results.
  • Conveyor tracking for picking or placing moving objects.
  • Tooling and fixtures that constrain parts consistently.

Vision-guided operation requires calibration between image coordinates and the robot’s coordinate system. Tool and workpiece coordinate calibration are also important: a repeatable mechanism can still place parts incorrectly if its coordinate transformations are wrong.

Performance characteristics

SCARA robots are valued for short cycle times, compact installation, and repeatable positioning. Their architecture concentrates on a restricted set of motions rather than providing arbitrary tool orientation.

Several performance measures must be distinguished:

  • Repeatability: how closely the robot returns to a previously reached pose under specified conditions.
  • Absolute accuracy: how closely the actual pose matches the commanded pose in a defined coordinate system.
  • Payload capacity: the permitted carried load, subject to constraints such as center-of-mass offset and rotational inertia.
  • Cycle time: the time required for a specified sequence, including relevant travel, payload, and settling conditions.

A robot can have excellent repeatability without equally good absolute accuracy. Link tolerances, joint offsets, structural deflection, and thermal effects influence the latter.

Payload includes both the handled part and the end effector. A light but widely offset load may impose substantial bending moments or wrist inertia. Tool hoses and cables can also affect motion, particularly at high acceleration.

Published cycle times are meaningful only with their test conditions. A short transfer with a light load does not represent every production task, and insertion, inspection, dispensing, or gripping time may dominate the overall process.

Applications

SCARA robots are widely used in automation where workpieces lie on a plane and require mainly vertical approach motions.

Assembly and insertion. Typical tasks include placing components into housings, inserting pins, and assembling small mechanisms. Success depends on part tolerances, alignment features, fixtures, and the forces involved.

Pick-and-place handling. Robots transfer parts between trays, feeders, conveyors, and process stations. Vacuum tools are common for flat or lightweight items.

Fastening and dispensing. A vertical tool orientation suits screwdriving, adhesive application, sealant dispensing, and similar operations. Tool reaction forces and process requirements determine the necessary stiffness and control features.

Inspection and testing. A SCARA may move a probe or camera, or present a component to stationary inspection equipment.

Electronics production is a prominent application area, but SCARAs also handle mechanical components, consumer products, and packaged goods. Cleanroom or washdown suitability depends on the particular robot’s construction and certification, not on its kinematic type.

History

The SCARA concept emerged in Japan in the late 1970s through work led by Hiroshi Makino at the University of Yamanashi, in collaboration with industrial partners. Its development addressed assembly tasks that required rapid horizontal positioning, a vertical insertion direction, and accommodation of small lateral misalignments.

Commercial SCARA robots appeared in the early 1980s. The architecture became an established branch of robotics, alongside Cartesian, articulated, and parallel manipulators. Subsequent development improved drives, controllers, feedback systems, and integration with vision and factory equipment while retaining the characteristic planar arm arrangement.

Limitations and comparison with other architectures

A SCARA’s principal limitation is its restricted tool orientation. Tasks requiring angled access, complex reorientation, or movement around large obstacles may favor a six-axis articulated robot.

A Cartesian robot uses linear axes and offers a directly defined rectangular workspace. It can suit long travel or gantry installations, whereas a SCARA provides a compact rotary-arm arrangement whose reach and motion characteristics vary with configuration.

A delta robot uses a parallel mechanism and can provide very rapid handling of lightweight objects over a conveyor. Selection between delta and SCARA architectures depends on payload, workspace, vertical stroke, process forces, and tooling rather than speed alone.

SCARA installations also require attention to the whole arm’s swept volume, not just the tool path. Fast motion can produce vibration, and the supporting frame and tooling affect settling and precision. Maintenance of transmissions, bearings, brakes, and cable systems influences long-term performance.

As with other industrial robots, safe integration requires assessment of crushing, trapping, impact, and dropped-load hazards. Guarding, interlocks, and appropriate functional safety measures depend on the complete application; a conventional SCARA is not inherently a collaborative robot.