Satellite altimetry is the measurement of the height of Earth’s surface using instruments carried by orbiting satellites. It combines the measured distance between a satellite and a reflecting surface with precise knowledge of the satellite’s position to determine surface elevation relative to a defined reference. As a form of remote sensing, it is used to observe oceans, ice sheets, sea ice, rivers, lakes, and land. Repeated measurements reveal changes in surface height, making altimetry a principal source of information about global sea-level rise and an important tool in oceanography, hydrology, and polar research.
Measurement principles
Most satellite altimeters are active instruments: they transmit electromagnetic pulses and measure the returning echoes. Radar altimeters use microwave signals, while laser altimeters use optical pulses. The round-trip travel time gives the distance, or range, between the instrument and the reflecting surface.
For an idealized measurement,
where is range, is the speed of light in vacuum, and is the round-trip travel time. Actual measurements require corrections for propagation through the atmosphere, instrument delays, and the way the surface reflects the signal.
For a nearly vertical observation, surface elevation can be expressed schematically as
where is the satellite’s altitude above a reference ellipsoid and is the corrected range. Off-nadir measurements require a more complete geometric calculation using the instrument’s pointing direction and the satellite’s position.
Satellite position is determined through precise orbit determination, using tracking systems such as satellite navigation receivers, ground-based laser ranging, and Doppler tracking. An error in orbital altitude can be mistaken for a surface-height error, so accurate ranging alone is insufficient.
Height reference surfaces
Altimetric heights are commonly expressed relative to an ellipsoid, a smooth mathematical approximation to Earth’s shape. This is different from height above the geoid, an equipotential surface of Earth’s gravity field that approximates the resting ocean surface.
The distinction is essential in oceanography. The sea surface has large, persistent variations relative to an ellipsoid because of spatial variations in gravity. Subtracting an appropriate geoid model reveals the ocean’s dynamic topography: the elevation associated with circulation and other departures from gravitational equilibrium.
All comparisons require a consistent geodetic datum, reference frame, and treatment of time-dependent effects.
Instrument types
Conventional radar altimetry
Conventional radar altimeters generally observe close to nadir—the point directly beneath the satellite. Over the open ocean, the returning waveform is formed by reflections from many wave facets within the illuminated area. Its timing and shape provide estimates of surface range, significant wave height, and radar backscatter.
The effective footprint depends on instrument design, altitude, pulse characteristics, sea state, and processing. A conventional ocean measurement represents an area rather than a single geometrical point. Near coastlines or over broken terrain, reflections from different surfaces can distort the waveform.
Radar observations operate during day and night and generally penetrate clouds, although heavy rain and atmospheric water can degrade some measurements.
Synthetic-aperture and interferometric radar altimetry
Synthetic-aperture, or delay-Doppler, processing combines successive radar echoes while accounting for satellite motion. This improves along-track resolution and can help separate reflections from nearby surfaces. It does not produce the same type of image as ordinary side-looking radar imaging.
Interferometric altimetry uses phase differences between receiving antennas to determine the direction of a reflection. This helps locate echoes over sloping ice and supports wide-swath measurement systems.
The Surface Water and Ocean Topography mission, or SWOT, uses radar interferometry to measure water-surface elevation across swaths on either side of its ground track. This expands spatial coverage beyond the narrow profiles of traditional nadir instruments.
Laser altimetry
Laser altimeters measure ranges using short optical pulses. Depending on the instrument, they record returning waveforms or detect individual photons. Their relatively small footprints and precise ranging are useful for ice-sheet elevation, land topography, and vegetation structure.
Clouds can block or scatter laser signals, and atmospheric particles, background sunlight, surface reflectivity, and terrain slope affect data quality. Where separate canopy and ground returns can be identified, laser altimetry can help characterize forest height as well as the underlying terrain.
Radar and laser instruments may detect different effective surfaces. Microwave signals can penetrate dry snow to varying depths, while optical returns generally originate nearer the snow surface. This difference matters when comparing elevations or interpreting change.
Corrections and data processing
Several processing stages separate a measured echo from a scientific elevation product.
Atmospheric propagation. Radar signals experience delays in the ionosphere and the neutral atmosphere. Dual-frequency measurements can estimate ionospheric effects, while atmospheric models and microwave radiometers help correct delays associated with dry gases and water vapour.
Waveform interpretation. A processing step called retracking estimates the appropriate range point from the received waveform. Different algorithms are used for open ocean, sea ice, inland water, and ice sheets. An algorithm suited to one surface may perform poorly over another.
Ocean surface effects. Ocean measurements require treatment of sea-state bias, which arises because radar does not sample wave crests and troughs equally and because the ranging estimate depends on wave properties.
Geophysical variability. Depending on the intended product, processing may remove or model ocean tides, solid-Earth tides, atmospheric loading, and other time-dependent effects. These are not simply instrument errors: they are real variations that must be separated from the phenomenon being studied.
Instrument and mission consistency. Timing offsets, internal delays, orbital errors, and long-term drift must be characterized. Calibration uses dedicated sites, independent observations, and comparisons between satellites. Overlapping missions are especially important for constructing consistent records across decades.
No single accuracy figure describes all satellite altimetry. Measurement uncertainty depends on the instrument, surface, atmospheric conditions, processing, and averaging scale. Carefully processed open-ocean observations can achieve centimetre-scale sea-surface-height accuracy, but this performance should not be assumed for individual measurements over rough ice, narrow rivers, or steep land.
Major applications
Sea level and ocean circulation
Repeated ocean measurements provide sea-surface-height anomalies relative to a long-term mean. These observations track regional variability and contribute to estimates of global mean sea-level change. Long-term interpretation requires stable calibration, consistent processing, and attention to sampling and reference-frame effects, including the treatment of glacial isostatic adjustment.
Altimetry and tide gauges measure related but different quantities. Altimetry measures sea-surface height in a geocentric reference frame; tide gauges measure water level relative to the land supporting them. Land subsidence or uplift can therefore cause local relative sea-level trends to differ from satellite-derived trends.
Sea-surface slopes also constrain ocean currents through the approximate balance between pressure-gradient and Coriolis forces. Altimetry maps mesoscale eddies, major currents such as the Gulf Stream, and changes associated with El Niño–Southern Oscillation. It does not directly measure the complete three-dimensional velocity field, and the simplest geostrophic interpretation becomes problematic near the equator.
Altimetric observations are assimilated into ocean forecasting systems and support studies of marine heat distribution and climate change.
Ice sheets, glaciers, and sea ice
Repeated elevation measurements reveal changes in the surfaces of ice sheets and glaciers, particularly in Greenland and Antarctica. Converting elevation change into mass change requires assumptions or independent information about density, snowfall, ice dynamics, and compaction of firn.
Changes in radar penetration can also produce apparent elevation changes unrelated to movement of the physical surface.
Over sea ice, altimetry can estimate freeboard: the height of the ice or snow surface above local sea level. Converting freeboard to ice thickness requires hydrostatic assumptions and estimates of snow depth and material densities. Uncertainty in these quantities can dominate the final thickness estimate.
Inland waters
Altimetry measures water levels in lakes, reservoirs, wetlands, and sufficiently observable rivers. It is valuable in regions where ground observations are sparse or difficult to maintain.
Water-level time series can document seasonal storage changes, floods, and droughts. Combining elevation with water-surface area and basin geometry can support estimates of changing water storage. River discharge is not measured directly: estimating it requires additional hydraulic relationships, channel information, or models, often supported by a stream gauge or other observations.
Traditional ground-track missions sample inland water only where their tracks intersect suitable water bodies. Wide-swath instruments increase spatial coverage, although vegetation, complex shorelines, and small water bodies remain challenging.
Land topography and seafloor inference
Laser altimetry and some radar observations contribute to digital elevation models, terrain analysis, and vegetation mapping. Steep slopes and heterogeneous surfaces complicate the interpretation of footprints and echoes.
Over the ocean, long-term mean sea-surface measurements also help infer broad seafloor structure. Seamounts and other mass variations perturb the gravity field, producing subtle patterns in the sea surface. Satellite altimetry therefore supports indirect seafloor mapping; it does not directly measure ocean depth and cannot replace detailed shipborne sonar surveys.
Historical development
Early experiments during the 1970s established the feasibility of satellite radar altimetry. GEOS-3, launched in 1975, and Seasat, launched in 1978, demonstrated its value for ocean measurements and marine geodesy.
ERS-1, launched in 1991, extended radar-altimetry observations of oceans and ice. TOPEX/Poseidon, launched in 1992, provided a major advance in precise ocean altimetry and helped establish the continuous high-accuracy sea-level record subsequently maintained by the Jason series and Sentinel-6 missions.
ICESat, launched in 2003, demonstrated spaceborne laser altimetry for ice and land studies. CryoSat-2, launched in 2010, expanded radar observations of polar ice using advanced measurement modes. ICESat-2, launched in 2018, introduced a multibeam photon-counting laser system.
SWOT, launched in 2022, extended radar altimetry from predominantly along-track profiles toward two-dimensional observations of ocean and inland-water surfaces.
Sampling limitations and interpretation
Satellite orbits impose trade-offs between geographic coverage, track spacing, and revisit time. A repeat orbit provides consistent revisits to the same tracks but leaves spaces between them. Combining missions improves coverage, although the observations are not simultaneous.
Rapidly changing tides, floods, or eddies can be undersampled. Periodic signals may appear at misleading frequencies through temporal aliasing. Maps produced by spatial interpolation therefore contain information inferred between observations, not measurements at every displayed location.
Coastal regions are especially difficult because land can contaminate radar echoes and atmospheric corrections, while tides and water-level variability become more complex. In polar regions, snow, melt ponds, surface roughness, and changing radar penetration affect interpretation.
Satellite altimetry is consequently strongest when combined with complementary measurements: tide gauges for coastal relative sea level, gravimetry for mass redistribution, ocean profiles for temperature and salinity, and ground surveys for local elevations. Agreement or disagreement among these systems helps distinguish genuine environmental change from sampling effects, processing differences, and measurement bias.