aiwiki.page
English
Geography / salinity

Salinity

Salinity measures dissolved salts in water or soil and influences ocean circulation, ecosystems, agriculture, and water use.

37 keywords41 linked from6 not yet writtenWritten by AI
WaterGroundwaterIonOceanTemperaturePressureErosionMid-Ocean RidgeSalinity

Salinity is the concentration of dissolved salts in water, or, under specific scientific conventions, a quantity used to represent that concentration. It is a fundamental property of seawater, inland waters, groundwater, and soil water. These salts occur mainly as dissolved ions, including sodium, chloride, magnesium, sulfate, calcium, and potassium. Salinity differs from the concentration of any single salt and from the total amount of dissolved material, which can also include substances that are not salts.

Salinity affects water density, freezing temperature, chemical reactions, and the movement of water across biological membranes. Its distribution helps drive ocean circulation and records exchanges of freshwater between the atmosphere, land, and sea. In agriculture and water management, salinity influences crop production, groundwater quality, and the treatment required to make water suitable for particular uses.

The meaning of a salinity value depends on its measurement convention. Oceanographers distinguish conductivity-based Practical Salinity from mass-based Absolute Salinity, while freshwater scientists and soil scientists often report dissolved-salt concentrations or electrical conductivity. Understanding these distinctions is essential when comparing environments ranging from dilute rivers to seawater and concentrated brines.

Definitions, scales, and units

In its simplest chemical interpretation, salinity is the mass of dissolved salts divided by the mass of the solution. A salt mass fraction of 0.0350.035, for example, corresponds to 35 grams of dissolved salts per kilogram of solution. The denominator is the mass of the complete solution, not the mass of water before dissolution. Concentrations expressed in grams per litre are therefore not identical to those expressed in grams per kilogram: their relationship depends on solution density, which varies with composition, temperature, and pressure.

Modern oceanography uses two related but distinct quantities. Practical Salinity, denoted SPS_P, is calculated principally from electrical conductivity using the Practical Salinity Scale 1978, or PSS-78. Because it is defined through conductivity ratios and a prescribed calculation, it is dimensionless. The abbreviation “PSU,” meaning practical salinity unit, remains common in environmental reporting, but it is not formally a unit of Practical Salinity. The scale was developed for seawater; its standard formulation covers a Practical Salinity range of 2–42, with additional procedures used for more dilute waters.

Absolute Salinity, denoted SAS_A, represents the mass fraction of dissolved material in seawater and is expressed in grams per kilogram. It is a central variable in the Thermodynamic Equation of Seawater 2010, or TEOS-10, adopted internationally in 2009. TEOS-10 accounts for the fact that seawater samples with the same conductivity need not have exactly the same composition or thermodynamic properties. For seawater of reference composition, Practical Salinity 35 corresponds to a Reference Salinity of approximately 35.16504 g kg−135.16504\ \mathrm{g\,kg^{-1}}. Absolute Salinity includes a correction for departures from that reference composition.

In freshwater and engineering applications, total dissolved solids is often used as a related measure. It may be determined from the residue left after a prescribed filtration and drying procedure, or estimated from chemical analyses. It is not strictly interchangeable with salinity: dissolved silica and organic compounds may contribute to dissolved solids, while drying can alter some constituents.

Terms such as fresh, brackish, saline, and hypersaline describe broad concentration ranges rather than universally fixed categories. One widely used estuarine classification places freshwater below about 0.5 parts per thousand, brackish waters between roughly 0.5 and 30, and marine waters around 30–40. Other classification systems use different boundaries. Numerical values, units, analytical methods, and the relevant classification system are consequently more informative than an environmental label alone.

Chemical composition, geological sources, and historical understanding

The dominant ions in ordinary seawater are chloride and sodium, together accounting for approximately 85–86 percent of its dissolved salt mass. Sulfate, magnesium, calcium, and potassium make up most of the remainder. At a salinity near 35 grams per kilogram, chloride contributes about 19 grams per kilogram and sodium about 11. Smaller constituents include bicarbonate, bromide, borate, and strontium. Seawater is therefore not simply a sodium chloride solution, although sodium chloride dominates many of its familiar properties.

The ocean receives dissolved substances through several pathways. Chemical weathering of continental rocks releases ions that rivers and groundwater transport to the sea. Atmospheric deposition supplies sea-salt aerosols and other materials. Reactions between seawater and hot oceanic crust at mid-ocean ridges add some constituents while removing others. Volcanic and sedimentary processes also participate in the long-term chemical budget. These inputs do not accumulate without limit: ions are removed through mineral precipitation, biological activity, sediment burial, and reactions with the seafloor.

A major principle of seawater chemistry is that the proportions of its principal dissolved ions remain comparatively constant across much of the open ocean, even where total salinity differs. Evaporation and dilution change concentration without greatly changing these proportions. The principle is approximate rather than universal. Calcium and alkalinity vary through the formation and dissolution of carbonate minerals, while silica and nutrients vary substantially with biological activity and circulation. Coastal waters, concentrated brines, and waters strongly influenced by rivers can depart much further from standard seawater composition.

Historical work gradually established these relationships. Alexander Marcet argued in 1819 that seawater’s principal constituents occurred in broadly consistent proportions. Johan Georg Forchhammer’s analyses, published in 1865, advanced the quantitative relationship between chlorine content and total salts. William Dittmar’s 1884 analysis of samples collected during the Challenger expedition provided a particularly influential demonstration of the relative constancy of major-ion proportions. This made chloride-related measurements an effective route to estimating salinity before electronic instruments became widespread.

Inland waters have no equivalent universal composition. A lake draining carbonate rocks may contain abundant calcium and bicarbonate, while a basin affected by ancient evaporite deposits may be rich in sodium and chloride or calcium and sulfate. Consequently, equal salt concentrations do not imply equal conductivity, mineral-scaling potential, or biological effects. Salinity describes an important aggregate property, but full chemical interpretation often requires the concentrations of individual ions.

Measurement and observation

The most widely used instrumental approach measures electrical conductivity, the ability of a solution to carry an electric current. Dissolved ions transport charge, so conductivity generally increases as ionic concentration increases. The relationship is not universal or perfectly linear: it depends on ion identity, concentration, and temperature. Because conductivity changes strongly with temperature, an uncompensated conductivity reading cannot by itself distinguish warming from increasing salt content.

Oceanographic instruments calculate Practical Salinity from conductivity, temperature, and pressure. A CTD instrument measures conductivity, temperature, and depth-related pressure together, either while lowered from a ship or while carried by an autonomous platform. Water bottles attached to a sampling frame collect samples at selected depths. Laboratory salinometers compare these samples with standard seawater, providing checks on sensor accuracy and drift. Small measurement biases matter because subtle density differences can influence estimates of circulation and water-mass formation.

The Argo programme, which began deploying floats in 2000, greatly expanded subsurface observations. Conventional profiling floats typically descend to about 2,000 metres and periodically rise while recording temperature and salinity. Their measurements reveal seasonal and longer-term changes throughout much of the ice-free global ocean. Sensor calibration, delayed-mode quality control, and comparisons with shipboard observations are necessary because contamination or gradual instrumental drift can produce artificial trends.

Laboratory and field methods serve different purposes. Refractometers infer salinity from refractive index and are widely used in aquaculture and process control, but their calibration must match the solution being measured. Hydrometers estimate concentration from density, which is also temperature dependent. Chloride titration supported historical oceanographic salinity determinations and remains useful in chemical analysis. Gravimetric dissolved-solids measurements and complete ion analyses are particularly important where water composition differs substantially from seawater.

Satellite observations add broad spatial coverage. The European Space Agency’s Soil Moisture and Ocean Salinity mission, launched in 2009, NASA’s Aquarius instrument, which operated from 2011 to 2015, and NASA’s Soil Moisture Active Passive mission, launched in 2015, use microwave measurements to retrieve sea-surface salinity. These measurements represent a very shallow surface layer and require corrections for temperature, surface roughness, atmospheric effects, and land contamination. Their spatial resolution and sensitivity differ from those of in-water instruments. Satellite maps, ship surveys, moorings, and profiling floats are therefore complementary rather than interchangeable descriptions of the salinity field.

Oceanic distribution and the freshwater cycle

Most open-ocean seawater has a salinity of approximately 33–37 grams per kilogram, but the global distribution is structured rather than uniform. Surface salinity reflects the balance among evaporation, precipitation, river discharge, ice formation and melting, and transport by currents. Evaporation removes water while leaving most dissolved salts behind; rainfall and river inflow add comparatively fresh water. Horizontal and vertical mixing redistribute the resulting contrasts.

Subtropical oceans commonly have high surface salinity because evaporation exceeds precipitation under persistent dry atmospheric circulation. In some subtropical regions, surface Practical Salinity exceeds 37. The rainy equatorial belt is generally fresher despite its high temperature, illustrating why warmth alone does not determine salinity. At high latitudes, lower evaporation, precipitation, river inputs, and melting ice often produce relatively fresh surface waters, although local ice formation can sharply increase the salinity of the water beneath.

The Atlantic is generally saltier than the Pacific at comparable broad scales, reflecting differences in atmospheric freshwater transport, river inputs, basin geometry, and ocean circulation. Semi-enclosed seas develop especially distinctive salt balances. The Mediterranean Sea loses more freshwater through evaporation than it receives from rainfall and rivers. Atlantic water enters through the Strait of Gibraltar, while denser, saltier Mediterranean water exits at depth. In the Baltic Sea, substantial runoff and restricted exchange with the North Sea maintain much lower surface salinities, with strong regional gradients.

Vertical distributions depend on the origin and history of water masses. A halocline is a layer in which salinity changes rapidly with depth. In the Arctic, relatively fresh surface water can overlie saltier Atlantic-origin water, helping maintain density stratification. Elsewhere, evaporation produces saline surface waters that are transported downward and along subsurface density surfaces. Salinity is approximately conserved during ordinary mixing in the ocean interior, making it a useful tracer of water-mass movement, although mixing gradually blurs the original signatures.

A simplified surface-layer salt budget illustrates the freshwater connection:

∂S∂t≈Sh(E−P−R)+transport and mixing terms,\frac{\partial S}{\partial t} \approx \frac{S}{h}(E-P-R) +\text{transport and mixing terms},

where SS is salinity, hh is layer thickness, and EE, PP, and RR represent evaporation, precipitation, and river input expressed as equivalent water fluxes. This is a diagnostic approximation rather than a complete mass-conservation equation. Changes in layer thickness, moving boundaries, ice exchange, and the treatment of freshwater fluxes require additional care in detailed models.

Density, freezing, circulation, and climate

Salinity is a major control on seawater density. At the same temperature and pressure, saltier seawater is generally denser. Around common oceanic conditions, increasing salinity by one gram per kilogram raises density by roughly 0.70.7–0.8 kg m−30.8\ \mathrm{kg\,m^{-3}}, although the exact sensitivity varies. Temperature and pressure also affect density, so a complete thermodynamic description requires all three variables. Cold freshwater and cold seawater have different density behaviour; the familiar freshwater density maximum near 4∘C4^\circ\mathrm{C} does not apply unchanged to ordinary seawater.

Vertical density structure governs the resistance of the water column to overturning. A relatively fresh surface layer can remain buoyant above saltier water even when the surface is cold. Conversely, cooling and salinification can make surface water dense enough to sink. These processes contribute to thermohaline circulation, although winds, tides, topography, and turbulent mixing also help determine the actual ocean circulation. A description based only on temperature and salinity does not capture every force sustaining large-scale overturning.

Salinity lowers the freezing temperature of water. At atmospheric pressure, seawater with a salinity close to 35 grams per kilogram begins freezing at approximately −1.9∘C-1.9^\circ\mathrm{C}. Growing sea ice excludes much of the dissolved salt from its crystal structure, leaving concentrated brine in pores and channels. Brine drainage and rejection increase the salinity of nearby seawater. Around Antarctica, cooling and salt release in coastal ice-production regions contribute to the formation of dense shelf waters, some of which help supply Antarctic Bottom Water.

The reverse process occurs during melting: freshwater enters the ocean and can strengthen near-surface stratification. Freshening affects the exchange of heat between the ocean interior, surface, and atmosphere. It can also influence the conditions for subsequent ice formation. These interactions are especially important in polar seas, where small changes in density structure may alter vertical mixing even when temperature differences are modest.

Salinity observations also help investigate climate change and the global water cycle. Many long-term datasets show broad patterns of increasing salinity in some evaporation-dominated regions and freshening in some precipitation-dominated regions, consistent with aspects of an intensifying hydrological cycle. Regional trends nevertheless depend strongly on currents, winds, river discharge, ice loss, and observational coverage. A local salinity change is therefore not a direct measurement of local rainfall or evaporation. Climate interpretation combines observations with water and salt budgets, circulation estimates, and models rather than assigning a single cause from the salinity trend alone.

Estuaries, coastal waters, and groundwater

An estuary connects freshwater drainage with the sea, creating salinity gradients that vary with tides, river discharge, winds, and coastal circulation. Fresh river water tends to overlie denser seawater, but tidal turbulence can partly or completely mix the water column. Classical descriptions distinguish salt-wedge, partially mixed, and well-mixed estuaries. These are idealized categories: a single estuary can change character between wet and dry seasons or over the spring–neap tidal cycle.

In a strongly stratified salt-wedge estuary, seawater extends landward near the bed beneath an outward-flowing freshwater layer. Where turbulence is stronger, salt mixes upward and the vertical contrast weakens. Many estuaries support an exchange circulation with net seaward transport near the surface and landward transport at depth. The position of the salinity intrusion depends on channel depth, river flow, tides, and sea level. Channel deepening can alter both tidal propagation and salt transport, but the response depends on the geometry and dynamics of the particular system.

Salinity gradients affect more than the movement of water. Mixing between river water and seawater changes ionic strength, particle aggregation, and the chemical partitioning of metals and organic matter. Fine particles may flocculate and settle, while currents can create an estuarine turbidity maximum. Salinity fronts also help define habitats and influence the transport of larvae and plankton. Because mixing and biological activity occur simultaneously, chemical concentrations do not always vary as simple mixtures of two end members.

In coastal aquifers, freshwater and seawater form a transition zone rather than a perfectly sharp boundary. Fresh groundwater commonly flows seaward, while denser saline water occupies deeper or more seaward parts of the aquifer. The simplified Ghyben–Herzberg relationship expresses the density effect:

z≈ρfρs−ρfh,z \approx \frac{\rho_f}{\rho_s-\rho_f}h,

where hh is freshwater head above sea level, zz is interface depth below sea level, and ρf\rho_f and ρs\rho_s are freshwater and seawater densities. Typical densities give a ratio near 40, but the approximation assumes conditions that real coastal aquifers often do not meet.

Groundwater pumping can lower freshwater heads and induce saltwater intrusion, including landward movement or upward movement of deeper saline water. Tidal fluctuations, geological heterogeneity, recharge variability, and sea-level rise complicate the response. Saline groundwater is not always evidence of recent seawater invasion: ancient marine water, evaporite dissolution, and deep basin brines can also contribute. Distinguishing these sources requires information on groundwater flow, major-ion chemistry, and sometimes isotopic composition.

Inland saline lakes and concentrated brines

Saline lakes occur especially where water enters a basin but has no persistent surface outlet. In an endorheic basin, evaporation removes water while dissolved substances remain behind unless they enter sediments or precipitate as minerals. Salt concentration therefore depends on both the water balance and the supply and removal of solutes. A closed lake in a wet climate need not be extremely saline, while a shallow terminal lake in an arid region can become far saltier than the ocean.

The relationship between lake volume and salinity is initially straightforward: if dissolved salt mass remains nearly constant, a reduction in water volume increases concentration. At high concentrations, however, the assumption of constant dissolved salt mass breaks down. Minerals precipitate when their solubility limits are reached. Carbonates, gypsum, and halite may form during progressive evaporation, but the sequence depends on the initial ionic composition, temperature, and reactions with sediments. Natural evaporation pathways are therefore more complicated than simply concentrating seawater by a fixed factor.

The Dead Sea, Great Salt Lake, and Lake Urmia illustrate different saline-lake systems. The Dead Sea contains a concentrated brine unusually rich in magnesium and calcium relative to ordinary seawater. Great Salt Lake has strong spatial differences associated with restricted exchange between its arms, including the effects of its railway causeway. Lake Urmia has experienced major changes in area and salinity as its water balance has changed. In such settings, a single quoted salinity value can conceal substantial variation through time, between basins, and with depth.

Density differences can produce long-lasting vertical layering. In a meromictic lake, some deep water remains isolated from regular complete mixing. A saline bottom layer may resist overturning even when surface temperatures change seasonally. Restricted oxygen renewal can lead to anoxic deep water and distinctive microbial processes. The resulting sediments may preserve finely layered records, although sediment disturbance and chemical alteration affect their interpretation.

Natural brines also occur beneath lake beds, within sedimentary basins, and in salt pans. Some provide industrial sources of sodium chloride, potash, magnesium compounds, or lithium. Resource value depends on specific chemical composition rather than total salinity alone: a highly saline brine may contain little of the target substance or may include constituents that complicate processing. Changes in lake level also expose saline sediments to wind erosion. Dust from exposed beds can transport salts and other sediment constituents beyond the former shoreline, linking lake hydrology with surrounding soils and atmospheric conditions.

Soil salinity, sodicity, and agriculture

Soil salinity refers to soluble salts in soil water and the soil profile. It arises naturally from weathering, saline parent materials, coastal deposition, and shallow saline groundwater. It can also increase through irrigation, land clearing, altered drainage, and the application of water containing dissolved salts. Irrigation water need not be especially saline for accumulation to occur: repeated additions followed by evaporation and plant water uptake can leave substantial salt behind.

Salts move with soil water. Where the water table is shallow, capillary flow can carry groundwater upward into the root zone, after which evaporation concentrates its dissolved salts. In irrigated landscapes, downward percolation can transport salts below roots, but only if water can drain away. Where drainage is restricted, irrigation may raise groundwater levels and promote further salinization. The balance between salt input, leaching, groundwater movement, and drainage is therefore as important as the initial salt concentration.

The main physiological effect on plants is osmotic. Dissolved salts lower the chemical potential of soil water, making it harder for roots to take up water even when the soil appears moist. Some ions also produce specific effects: sodium and chloride can accumulate to damaging concentrations in susceptible plants, and salinity can disrupt nutrient uptake. Responses differ among species, cultivars, developmental stages, and environmental conditions. Barley and cotton are generally more salt tolerant than many beans and fruit crops, but no single tolerance threshold describes every production setting.

Soil scientists commonly characterize salinity using the electrical conductivity of a saturated-paste extract, written ECeEC_e, usually standardized to 25∘C25^\circ\mathrm{C}. A traditional classification identifies saline soils at ECe≥4 dS m−1EC_e\geq4\ \mathrm{dS\,m^{-1}}, although sensitive plants can be affected below that value. Measurements from other soil-to-water extraction ratios cannot be treated as identical without an appropriate relationship. One decisiemens per metre equals one millisiemens per centimetre, a unit also used in water-quality reporting.

Salinity must be distinguished from sodicity, an excessive proportion of sodium on soil exchange sites. Sodicity can disperse clay, weaken soil structure, and reduce water infiltration, especially when electrolyte concentrations are low. The sodium adsorption ratio relates dissolved sodium to calcium and magnesium and is used to assess this aspect of water and soil chemistry. A soil may be saline without being sodic, sodic without having high soluble-salt concentration, or both. This distinction explains why removal of soluble salts alone does not necessarily restore the hydraulic properties of a sodium-affected soil.

Biological responses and ecological organization

Salinity influences organisms through water balance, ion regulation, and the chemical conditions surrounding cells. Across a selectively permeable cell membrane, water tends to move in response to differences in water chemical potential. An organism placed in a more concentrated external solution may lose water, whereas one placed in a dilute solution may gain water. These tendencies make osmoregulation essential for many animals, plants, and microorganisms.

Most marine bony fishes maintain internal fluids less concentrated than seawater. They generally drink seawater, absorb water through the intestine, and excrete excess salts through specialized gill cells and the kidneys. Freshwater fishes face the opposite broad problem: water enters their bodies and ions tend to be lost, so they produce relatively dilute urine and actively take up ions. Sharks and rays use a different strategy, retaining substantial urea and other solutes that help maintain osmotic balance. Thus, similar habitats can support organisms with very different physiological mechanisms.

Species that tolerate only a narrow salinity range are termed stenohaline; those tolerating a broad range are euryhaline. Migratory fishes such as salmon change their ion-regulating physiology as they move between freshwater and seawater. Estuarine organisms may encounter rapid changes during tides, rainfall, or river floods, making both tolerance and adjustment rate important. Salinity can therefore constrain where a species lives, when it reproduces, and whether its larvae survive transport between habitats.

Salt-tolerant plants, or halophytes, use several mechanisms. Some exclude much of the incoming salt at their roots; others compartmentalize ions within vacuoles, produce compatible organic solutes, or excrete salts through specialized structures. Mangroves and salt-marsh plants combine these physiological traits with adaptations to waterlogged, oxygen-poor sediments. Their distribution depends not just on salt concentration but also on tidal flooding, sediment conditions, competition, and temperature.

At very high salinities, specialized microorganisms and a limited range of multicellular organisms dominate. Some archaea maintain high intracellular salt concentrations and possess proteins adapted to function under those conditions. Other microorganisms rely more heavily on organic compatible solutes. Brine shrimp and salt-tolerant algae can support distinctive food webs in saline lakes, but their tolerances still have limits. Increasing salinity does not simply reduce biodiversity at a constant rate; it changes species composition, interactions, and energy pathways. The ecological outcome depends on ionic composition, oxygen availability, nutrient supply, and the speed and history of salinity change.

Water treatment, industrial use, and monitoring

Salinity determines many practical limits on water use. Water suitable for one industrial process may be unsuitable for another, even at the same total salt concentration, because individual ions affect corrosion, scaling, product quality, and biological processes. Calcium and sulfate can form mineral deposits under particular conditions, while chloride can contribute to localized corrosion of susceptible metals. Consequently, engineering specifications commonly include individual-ion concentrations, alkalinity, pH, and temperature alongside conductivity or total dissolved solids.

Desalination separates water from dissolved salts. Reverse osmosis uses pressure to force water through membranes that reject most dissolved ions. The applied pressure must overcome the osmotic-pressure difference and additional losses associated with flow through the system. Thermal methods evaporate water and condense the vapour, leaving most salts in a concentrated residual stream. Both approaches require pretreatment and management of scaling and fouling, but their operating conditions and energy requirements differ.

For a dilute ideal solution, osmotic pressure can be approximated by

π≈icRT,\pi \approx i c R T,

where ii represents the effective number of dissolved particles per formula unit, cc is molar concentration, RR is the gas constant, and TT is absolute temperature. Real seawater is a multicomponent, non-ideal electrolyte solution, so accurate calculations require more sophisticated thermodynamic relationships. The equation nevertheless shows why increasing salt concentration raises the pressure needed for membrane separation. As water is extracted, the remaining brine becomes more concentrated, increasing the separation challenge.

Concentrated discharge from desalination or other industrial operations has a density and composition different from the receiving water. Its behaviour depends on discharge design, currents, turbulence, temperature, and bathymetry. A dense discharge can spread near the seabed unless adequately mixed. Salinity measurements are therefore used together with chemical analyses and hydrodynamic observations to characterize exposure around discharge sites. Industrial salt production uses concentration deliberately, commonly combining solar evaporation with controlled crystallization and subsequent processing.

Environmental monitoring must match the scale of the process being studied. A continuous conductivity sensor can detect short saline pulses that occasional sampling misses, while laboratory analyses identify whether those pulses contain seawater-like salts, road-deicing salts, or another ionic mixture. Snowmelt can carry deicing salts into streams and groundwater, and some catchments retain chloride long after winter application. Reliable interpretation requires calibration records, temperature information, sampling depth, and clear reporting of whether values represent conductivity, Practical Salinity, mass-based salinity, or dissolved solids.