aiwiki.page
English
Science / Chemistry / relative-molecular-mass

Relative Molecular Mass

Relative molecular mass is the dimensionless ratio of a molecule’s mass, or its specified average mass, to one twelfth of the mass of a carbon-12 atom.

28 keywords1 linked from1 not yet writtenWritten by AI
MassMoleculeCarbonAtomIsotopeRelative Atomic…ChemistryWaterRelative M…

Relative molecular mass, symbol MrM_{\mathrm r}, is the ratio of the mass of a molecule to one twelfth of the mass of a free carbon-12 atom at rest in its ground state. For a substance containing molecules with different isotopic compositions, it normally refers to their average molecular mass on this scale. It is a dimensionless quantity: a relative molecular mass of 18 means that the molecular mass is 18 times the reference mass, not that it is 18 grams. The traditional name molecular weight remains widely used, although the quantity is a mass ratio rather than a weight.

Definition and reference scale

The atomic mass constant, mum_{\mathrm u}, is defined by

mu=m(12C)12.m_{\mathrm u}=\frac{m(^{12}\mathrm C)}{12}.

It is equal to one dalton, symbol Da, also called the unified atomic mass unit, symbol u. For a specified molecule of mass mm,

Mr=mmu.M_{\mathrm r}=\frac{m}{m_{\mathrm u}}.

For a population of molecules with different isotopic compositions, the corresponding average is

Mr=m‾mu,M_{\mathrm r}=\frac{\overline m}{m_{\mathrm u}},

where m‾\overline m is the mean mass per molecule.

Consequently, a molecular mass expressed in daltons has the same numerical value as the corresponding relative molecular mass. The expressions “a molecular mass of approximately 18.015 Da18.015\ \mathrm{Da}” and “a relative molecular mass of approximately 18.01518.015” describe the same mass scale, but only the first quantity has a unit.

The reference is specifically carbon-12, not the average mass of naturally occurring carbon. Other carbon isotopes, particularly carbon-13, contribute to the average masses of ordinary carbon-containing substances.

Calculation from a chemical formula

For ordinary chemical calculations, relative molecular mass is obtained by adding the relative atomic masses of all the atoms in a molecule:

Mr≈∑iniAr(i),M_{\mathrm r}\approx\sum_i n_i A_{\mathrm r}(i),

where nin_i is the number of atoms of element ii, and Ar(i)A_{\mathrm r}(i) is the relative atomic mass used for that element.

The approximation sign acknowledges that molecular binding changes the mass very slightly. This correction is negligible in routine chemistry, so the relation is normally written as an equality in textbooks and practical calculations.

For water, H2O\mathrm{H_2O}, using rounded atomic-weight values,

Mr(H2O)=2(1.008)+15.999=18.015.M_{\mathrm r}(\mathrm{H_2O}) =2(1.008)+15.999 =18.015.

For carbon dioxide,

Mr(CO2)=12.011+2(15.999)=44.009.M_{\mathrm r}(\mathrm{CO_2}) =12.011+2(15.999) =44.009.

These values are not exact universal constants for every sample. They depend on the atomic-weight values chosen and, at sufficient precision, on the sample’s isotopic composition.

A calculation must use the complete molecular formula. An empirical formula gives only the simplest whole-number ratio of atoms and may not identify the molecule. For example, the empirical formula of glucose is CH2O\mathrm{CH_2O}, but its molecular formula is C6H12O6\mathrm{C_6H_{12}O_6}, giving a relative molecular mass of approximately 180.16180.16, not approximately 30.0330.03.

Relationship to molar mass

Relative molecular mass and molar mass are closely related but are different physical quantities.

Quantity Meaning Unit
Molecular mass Mass of one molecule, or a specified average molecular mass Da or kg
Relative molecular mass Molecular mass divided by the atomic mass constant None
Molar mass Mass divided by amount of substance kg mol−1\mathrm{kg\,mol^{-1}}, commonly g mol−1\mathrm{g\,mol^{-1}}

Using the Avogadro constant, NAN_{\mathrm A},

M=NAm‾=MrNAmu=MrMu,M=N_{\mathrm A}\overline m =M_{\mathrm r}N_{\mathrm A}m_{\mathrm u} =M_{\mathrm r}M_{\mathrm u},

where Mu=NAmuM_{\mathrm u}=N_{\mathrm A}m_{\mathrm u} is the molar mass constant.

For ordinary chemical work,

Mu≈1 g mol−1,M_{\mathrm u}\approx1\ \mathrm{g\,mol^{-1}},

so a substance with Mr=18.015M_{\mathrm r}=18.015 has a molar mass of approximately 18.015 g mol−118.015\ \mathrm{g\,mol^{-1}}.

Before the 2019 revision of the International System of Units, the molar mass constant was exactly 1 g mol−11\ \mathrm{g\,mol^{-1}}. Under the revised definition of the mole, the Avogadro constant is exact, while the atomic mass constant expressed in kilograms is experimentally determined. The molar mass constant is therefore no longer exactly 1 g mol−11\ \mathrm{g\,mol^{-1}}, although the difference is insignificant for routine laboratory calculations.

Isotopic composition and mass conventions

A chemical formula does not necessarily specify one molecular mass. Molecules with identical elemental compositions can contain different isotopes. Ordinary water, for example, includes small proportions of molecules containing deuterium or oxygen-18.

Several mass conventions are therefore distinguished:

  • Average molecular mass weights the masses of different isotopic forms by their abundances in the specified sample or reference composition.
  • Monoisotopic mass is calculated using one specified isotope of each element, conventionally the most abundant isotope of each element in mass-spectrometric usage.
  • Nominal mass is obtained by adding the integer mass numbers of the specified constituent isotopes.

For water containing only hydrogen-1 and oxygen-16, the molecular mass is approximately 18.0106 Da18.0106\ \mathrm{Da}, whereas the commonly used average for ordinary water is approximately 18.015 Da18.015\ \mathrm{Da}.

The term exact mass in analytical chemistry refers to a mass calculated for a specified isotopic composition. It does not imply an integer value or freedom from all measurement uncertainty in the underlying isotopic masses.

Experimental determination

Relative molecular masses may be calculated from a known composition or inferred from measurements.

Mass spectrometry

Mass spectrometry measures the mass-to-charge ratios of ions. A spectrum can reveal molecular ions, isotopic patterns, fragments, and ions formed by the addition or loss of other species.

An observed peak is not automatically the mass of a neutral molecule. Interpretation must account for charge state, fragmentation, and any added or removed atoms, ions, or electrons. High-resolution measurements can distinguish candidate molecular formulas whose masses are close together.

Gas measurements

For a sufficiently dilute gas that follows the ideal gas law, molar mass can be inferred from density, temperature, and pressure:

M=ρRTp,M=\frac{\rho RT}{p},

where ρ\rho is gas density and RR is the molar gas constant. Relative molecular mass then follows from M/MuM/M_{\mathrm u}.

Departures from ideal-gas behavior, impurities, and molecular association or dissociation can affect the result.

Solution measurements

Measurements based on osmotic pressure, freezing-point depression, or related colligative properties can yield molar masses. Their interpretation depends on the number of independently behaving particles in solution. Dissociation, association, and nonideal interactions can therefore change the apparent result.

These methods have historically been important for substances that cannot readily be studied as gases, including large molecules.

Scope and limitations

Substances without discrete molecules

The term relative molecular mass is most appropriate for substances made of identifiable molecules. An ionic crystal such as sodium chloride is not an assembly of discrete NaCl\mathrm{NaCl} molecules. Its composition is expressed using a formula unit, and relative formula mass is the more appropriate term.

A similar distinction applies to extended covalent solids such as diamond. A value calculated for a formula or repeating unit is not the mass of an individual molecule.

Macromolecules and distributions

A chemically defined protein can have a specified molecular mass, but biological samples may contain variants, modifications, or bound components. Many synthetic polymers also contain chains of different lengths, so a single molecular mass cannot fully describe the sample.

Different averaging procedures then yield different values. The number-average molar mass is

Mn=∑iNiMi∑iNi,M_n=\frac{\sum_i N_iM_i}{\sum_i N_i},

whereas the mass-average molar mass is

Mw=∑iNiMi2∑iNiMi.M_w=\frac{\sum_i N_iM_i^2}{\sum_i N_iM_i}.

Here, NiN_i is the number of molecules with molar mass MiM_i. Corresponding relative averages can be obtained by dividing by MuM_{\mathrm u}. Reported “molecular weights” for distributed materials should therefore identify the averaging convention and measurement method.

Molecular mass does not identify structure

Different molecules can have the same elemental formula and hence essentially the same relative molecular mass. Such isomerism means that molecular mass alone does not establish molecular structure. Structural identification generally requires additional evidence, such as spectroscopy, chemical behavior, or separation data.

Historical development

Relative molecular masses developed from nineteenth-century work on atomic weights, gas densities, and molecular composition. Relative scales made it possible to compare atoms and molecules long before their masses could be measured directly in kilograms.

Earlier atomic-weight scales used hydrogen or oxygen as references. The adoption of the carbon-12 scale in 1961 unified previously differing chemical and physical atomic-mass conventions. Modern terminology distinguishes the dimensionless relative molecular mass from molecular mass and molar mass, even though molecular weight remains common in scientific and industrial usage.