aiwiki.page
English
Science / Physics / reduced-mass

Reduced Mass

Reduced mass is the effective mass that converts the relative motion of two interacting bodies into an equivalent one-body problem.

33 keywords6 linked from1 not yet writtenWritten by AI
MassCenter of MassClassical Mechan…Quantum Mechanic…International Sy…KilogramInertial Referen…Kinetic EnergyReduced Ma…

Reduced mass is an effective mass used to describe the relative motion of two interacting bodies. For bodies with masses m1m_1 and m2m_2, it is defined by

μ=m1m2m1+m2,1μ=1m1+1m2.\mu=\frac{m_1m_2}{m_1+m_2}, \qquad \frac{1}{\mu}=\frac{1}{m_1}+\frac{1}{m_2}.

It allows a two-body problem to be separated into motion of the system’s center of mass and motion of one fictitious particle representing the bodies’ separation. Reduced mass is fundamental in classical mechanics and quantum mechanics, with applications to orbital motion, atomic energy levels, molecular vibrations, and collisions.

Definition and basic properties

For positive masses, reduced mass is positive and smaller than either component mass. Its dimensions and units are those of ordinary mass; its SI unit is the kilogram.

Two limiting cases illustrate its meaning:

  • Equal masses: if m1=m2=mm_1=m_2=m, then μ=m/2\mu=m/2.

  • One mass much larger than the other: if m2≫m1m_2\gg m_1, then

    μ=m11+m1/m2≈m1(1−m1m2).\mu=\frac{m_1}{1+m_1/m_2} \approx m_1\left(1-\frac{m_1}{m_2}\right).

    The reduced mass approaches the lighter mass as the heavier mass tends to infinity.

Thus, treating a heavy body as fixed is an approximation to the reduced-mass description. It is accurate when the mass ratio is sufficiently small, but it neglects the heavy body’s recoil.

Reduced mass is not the total mass of the system and does not imply that either body loses mass. It is the coefficient governing the inertia of a particular coordinate: the separation between the bodies.

Separation of center-of-mass and relative motion

Let two particles have positions r1\mathbf r_1 and r2\mathbf r_2, measured in an inertial reference frame. Define the total mass, center-of-mass position, and relative position by

M=m1+m2,R=m1r1+m2r2M,r=r1−r2.M=m_1+m_2, \qquad \mathbf R=\frac{m_1\mathbf r_1+m_2\mathbf r_2}{M}, \qquad \mathbf r=\mathbf r_1-\mathbf r_2.

The original positions can be recovered as

r1=R+m2Mr,r2=R−m1Mr.\mathbf r_1=\mathbf R+\frac{m_2}{M}\mathbf r, \qquad \mathbf r_2=\mathbf R-\frac{m_1}{M}\mathbf r.

Substituting these expressions into the total kinetic energy gives

T=12m1r˙1 2+12m2r˙2 2=12MR˙ 2+12μr˙ 2.T=\frac12m_1\dot{\mathbf r}_1^{\,2} +\frac12m_2\dot{\mathbf r}_2^{\,2} =\frac12M\dot{\mathbf R}^{\,2} +\frac12\mu\dot{\mathbf r}^{\,2}.

The first term describes translation of the entire system. The second describes internal relative motion. The cancellation of the mixed velocity terms is what makes these coordinates especially useful.

If the interaction potential energy depends only on separation, V=V(r)V=V(\mathbf r), the Lagrangian becomes

L=12MR˙ 2+12μr˙ 2−V(r).L=\frac12M\dot{\mathbf R}^{\,2} +\frac12\mu\dot{\mathbf r}^{\,2} -V(\mathbf r).

For an isolated system, the equations of motion separate:

MR¨=0,μr¨=−∇rV.M\ddot{\mathbf R}=0, \qquad \mu\ddot{\mathbf r}=-\nabla_{\mathbf r}V.

The center of mass moves uniformly, while the relative coordinate behaves like a single particle of mass μ\mu moving in the original interaction potential.

The same result follows directly from Newton’s laws of motion. If the force on body 1 is F\mathbf F and that on body 2 is −F-\mathbf F, then

r¨=Fm1+Fm2=Fμ.\ddot{\mathbf r} =\frac{\mathbf F}{m_1}+\frac{\mathbf F}{m_2} =\frac{\mathbf F}{\mu}.

Both bodies contribute to the change in their separation, so the effective inertia of that separation is smaller than either individual mass.

Momentum and angular momentum

The momenta conjugate to R\mathbf R and r\mathbf r are

P=MR˙,p=μr˙.\mathbf P=M\dot{\mathbf R}, \qquad \mathbf p=\mu\dot{\mathbf r}.

Here P\mathbf P is the total momentum. In terms of the individual particle momenta,

p=m2p1−m1p2M.\mathbf p=\frac{m_2\mathbf p_1-m_1\mathbf p_2}{M}.

In the center-of-mass frame, where P=0\mathbf P=0, the particle momenta are equal and opposite:

p1=p,p2=−p.\mathbf p_1=\mathbf p,\qquad \mathbf p_2=-\mathbf p.

The internal kinetic energy is therefore p2/(2μ)p^2/(2\mu).

The total angular momentum about a fixed origin separates as

Ltotal=R×P+r×p.\mathbf L_{\mathrm{total}} =\mathbf R\times\mathbf P+\mathbf r\times\mathbf p.

For a central interaction, V=V(r)V=V(r), the internal angular momentum

L=r×μr˙\mathbf L=\mathbf r\times\mu\dot{\mathbf r}

is conserved. The radial energy equation is then

Erel=12μr˙ 2+L22μr2+V(r).E_{\mathrm{rel}} =\frac12\mu\dot r^{\,2} +\frac{L^2}{2\mu r^2} +V(r).

The term L2/(2μr2)L^2/(2\mu r^2) is the centrifugal contribution to the effective radial potential.

Gravitational two-body motion

For two point masses interacting through Newtonian gravity,

V(r)=−Gm1m2r,V(r)=-\frac{Gm_1m_2}{r},

where GG is the gravitational constant. The relative equation becomes

r¨=−G(m1+m2)r3r.\ddot{\mathbf r} =-\frac{G(m_1+m_2)}{r^3}\mathbf r.

This illustrates two distinct roles for mass: reduced mass governs the relative kinetic energy, while the sum m1+m2m_1+m_2 appears in the relative acceleration after the gravitational force is divided by μ\mu.

For a bound elliptical orbit with relative semimajor axis aa, the orbital period TT satisfies

T2=4π2a3G(m1+m2),T^2=\frac{4\pi^2a^3}{G(m_1+m_2)},

and the total orbital energy is

E=−Gm1m22a.E=-\frac{Gm_1m_2}{2a}.

The relative ellipse is not the path of either body around the center of mass. Their individual orbital semimajor axes are

a1=m2Ma,a2=m1Ma.a_1=\frac{m_2}{M}a, \qquad a_2=\frac{m_1}{M}a.

The reduced-mass formulation therefore describes both bodies’ motion without requiring either to be stationary.

Quantum-mechanical applications

For two nonrelativistic particles interacting through V(r1−r2)V(\mathbf r_1-\mathbf r_2), the Hamiltonian operator separates into

H^=−ℏ22M∇R2−ℏ22μ∇r2+V(r).\hat H =-\frac{\hbar^2}{2M}\nabla_{\mathbf R}^{2} -\frac{\hbar^2}{2\mu}\nabla_{\mathbf r}^{2} +V(\mathbf r).

Here ℏ\hbar is the reduced Planck constant. The internal Schrödinger equation is

[−ℏ22μ∇r2+V(r)]ψ(r)=Erelψ(r).\left[ -\frac{\hbar^2}{2\mu}\nabla_{\mathbf r}^{2} +V(\mathbf r) \right]\psi(\mathbf r) =E_{\mathrm{rel}}\psi(\mathbf r).

The same interaction potential can therefore be treated as a one-particle quantum problem, provided the particle mass is replaced by the reduced mass.

Hydrogen-like atoms

For an electron of mass mem_e bound to an atomic nucleus of mass mNm_N and charge +Ze+Ze,

μ=memNme+mN.\mu=\frac{m_em_N}{m_e+m_N}.

Using the electrostatic potential from Coulomb’s law, the nonrelativistic energy levels are

En=−μZ2e42(4πε0)2ℏ2n2,n=1,2,…E_n= -\frac{\mu Z^2e^4} {2(4\pi\varepsilon_0)^2\hbar^2n^2}, \qquad n=1,2,\ldots

These energies are proportional to μ\mu. The corresponding orbital length scale is

aμ=4πε0ℏ2μe2,a_\mu=\frac{4\pi\varepsilon_0\hbar^2}{\mu e^2},

with the characteristic size of a hydrogen-like ion scaling as aμ/Za_\mu/Z.

In hydrogen, the nucleus is a proton, whose mass is about 1,836 times the electron mass. The reduced mass is consequently about 0.99946me0.99946m_e. Although small, this difference matters in precision spectroscopy.

Changing the nuclear mass changes the reduced mass and hence the predicted transition frequencies. This is one contribution to isotope shifts. In many-electron atoms, additional nuclear-motion effects occur, so a single reduced-mass replacement does not account for the entire shift.

For an electron and a positron, the masses are equal and μ=me/2\mu=m_e/2. Their bound system consequently has a different Coulomb energy scale from hydrogen, even though the magnitudes of the interacting charges are the same.

Molecular vibrations and rotations

For an isolated diatomic molecule, nuclear motion can be expressed using the reduced mass of its two nuclei. Near the equilibrium bond length rer_e, the potential may be approximated by

V(r)≈V(re)+12k(r−re)2,V(r)\approx V(r_e)+\frac12k(r-r_e)^2,

where kk is the bond force constant.

The angular frequency of small-amplitude vibration is

ω=kμ,\omega=\sqrt{\frac{k}{\mu}},

and the ordinary frequency is ν=ω/(2π)\nu=\omega/(2\pi). In the quantum harmonic oscillator approximation, the vibrational levels are

Ev=ℏω(v+12),v=0,1,2,…E_v=\hbar\omega\left(v+\frac12\right), \qquad v=0,1,2,\ldots

For approximately unchanged force constants, replacing an atom with a heavier isotope increases μ\mu and lowers the vibrational frequency. This mass dependence helps interpret infrared and Raman spectra.

The moment of inertia of a rigid diatomic molecule about an axis perpendicular to the bond through the center of mass is

I=μre2.I=\mu r_e^2.

Its rotational energies are therefore

EJ=ℏ22μre2J(J+1),J=0,1,2,…E_J=\frac{\hbar^2}{2\mu r_e^2}J(J+1), \qquad J=0,1,2,\ldots

In polyatomic molecules, vibrations generally involve several coupled atomic displacements. A mode’s effective mass depends on its displacement pattern and coordinate normalization; it is not generally given by the two-body formula.

Collisions and scattering

In nonrelativistic scattering, reduced mass connects relative speed to the kinetic energy available in the center-of-mass frame:

Ecm=12μvrel2,p=μvrel.E_{\mathrm{cm}}=\frac12\mu v_{\mathrm{rel}}^2, \qquad p=\mu v_{\mathrm{rel}}.

For a projectile of mass m1m_1 striking a stationary target of mass m2m_2, with projectile laboratory kinetic energy ElabE_{\mathrm{lab}},

Ecm=m2m1+m2Elab.E_{\mathrm{cm}}=\frac{m_2}{m_1+m_2}E_{\mathrm{lab}}.

The remaining kinetic energy is associated with center-of-mass translation. This distinction matters when comparing laboratory collision energies with internal reaction thresholds.

In quantum scattering, the relative wave number is

k=pℏ=2μEcmℏ,k=\frac{p}{\hbar} =\frac{\sqrt{2\mu E_{\mathrm{cm}}}}{\hbar},

so reduced mass enters the relation between collision energy and wavelength.

Scope and limitations

The standard reduction is exact within nonrelativistic mechanics for two particles with constant masses, ordinary quadratic kinetic energies, and an interaction depending only on their relative position. A central potential is required for the additional simplification to conserved internal angular momentum, but not for center-of-mass separation itself.

External fields can couple center-of-mass and relative motion. The kinetic-energy decomposition remains valid, but the potential may no longer separate. Systems with more than two bodies can use hierarchical relative coordinates and associated reduced masses, although their interactions generally remain coupled.

The simple substitution m→μm\rightarrow\mu is not a complete treatment in relativistic mechanics. Likewise, high-precision atomic calculations require recoil, relativistic, radiative, and nuclear-structure effects beyond the nonrelativistic two-body equation.