aiwiki.page
English
Science / Physics / inelastic-collision

Inelastic Collision

An inelastic collision is an interaction in which the total kinetic energy of the colliding bodies is not conserved, although total energy and, for an isolated system, momentum remain conserved.

24 keywords2 linked from1 not yet writtenWritten by AI
Kinetic EnergyEnergyMomentumElastic Collisio…Classical Mechan…Internal EnergyTemperatureThermodynamicsInelastic…

An inelastic collision is a collision in which the total kinetic energy associated with the motion of the colliding bodies is not conserved. In ordinary macroscopic impacts, some of this energy is transferred into deformation, vibration, thermal motion, or sound. Total energy remains conserved when all these forms and any energy transferred to the surroundings are included. The total momentum of the colliding system is also conserved if the net external impulse is zero. Unlike an elastic collision, an inelastic collision can leave the participants permanently deformed, internally excited, or joined together.

Physical meaning and energy balance

In classical mechanics, a collision is usually treated as a brief interaction during which the forces between the colliding bodies are much larger than external forces. This often makes it possible to neglect the external impulse, even when external forces are not strictly absent.

For two bodies of constant masses m1m_1 and m2m_2, with initial velocities u1,u2\mathbf{u}_1,\mathbf{u}_2 and final velocities v1,v2\mathbf{v}_1,\mathbf{v}_2, momentum conservation gives

m1u1+m2u2=m1v1+m2v2.m_1\mathbf{u}_1+m_2\mathbf{u}_2 = m_1\mathbf{v}_1+m_2\mathbf{v}_2.

This equation applies to both elastic and inelastic collisions under the same isolation condition. Inelasticity does not imply a failure of momentum conservation.

For an ordinary dissipative collision, the decrease in translational kinetic energy is

Eloss=(12m1u12+12m2u22)−(12m1v12+12m2v22)>0.E_{\mathrm{loss}} = \left(\frac12m_1u_1^2+\frac12m_2u_2^2\right) - \left(\frac12m_1v_1^2+\frac12m_2v_2^2\right) >0.

The term “loss” refers only to the kinetic-energy account being considered, not to the destruction of energy. The energy may become:

  • permanent deformation or damage;
  • vibrations within the bodies;
  • increased internal energy, often accompanied by a rise in temperature;
  • sound and other disturbances carried into the surroundings;
  • rotational motion, when the calculation tracks only translation.

The last case requires care: if rotational kinetic energy increases, that increase must be included before deciding how much total kinetic energy has actually been dissipated.

An increase in thermal internal energy is often loosely described as “conversion into heat.” In thermodynamics, however, heat specifically denotes energy transferred because of a temperature difference. An impact can increase internal energy through mechanical work without heat transfer across the system boundary.

Partially and perfectly inelastic collisions

Partially inelastic collisions

In a partially inelastic collision, the bodies separate after impact, but their total kinetic energy is lower than before. A ball that rebounds to a lower height after striking a stationary floor is a familiar approximate example.

Temporary deformation occurs even in highly elastic impacts. What distinguishes an inelastic impact is that the energy stored during compression is not fully returned to the bodies’ overall motion. Some remains in vibrations or is redistributed through irreversible processes.

Perfectly inelastic collisions

In the standard particle model, a perfectly inelastic collision is one in which the bodies move together after impact. Their common final velocity is

V=m1u1+m2u2m1+m2.\mathbf{V} = \frac{m_1\mathbf{u}_1+m_2\mathbf{u}_2}{m_1+m_2}.

Examples include lumps of clay that stick together or a projectile that becomes embedded in a target.

For fixed initial conditions, this outcome produces the largest possible decrease in translational kinetic energy for two bodies of unchanged masses in an isolated system. It does not generally remove all kinetic energy: momentum conservation requires the joined bodies to continue moving whenever the initial total momentum is nonzero.

For extended objects, sticking does not necessarily mean every point has the same velocity. An off-center impact can produce a joined object that both translates and rotates. Conservation of angular momentum must then be considered, and some of the initial kinetic energy can remain as rotation.

Center-of-mass description

The distinction between overall motion and relative motion becomes especially clear in the center-of-mass description. Define

M=m1+m2,μ=m1m2m1+m2,M=m_1+m_2, \qquad \mu=\frac{m_1m_2}{m_1+m_2},

where μ\mu is the reduced mass. For two nonrelativistic particles, the total kinetic energy can be written as

K=12MVcm2+12μ∣v1−v2∣2.K = \frac12M V_{\mathrm{cm}}^2 + \frac12\mu |\mathbf{v}_1-\mathbf{v}_2|^2.

The first term describes translation of the center of mass. The second describes motion relative to it.

When external impulse is negligible, the center-of-mass velocity is unchanged by the collision. Consequently, the translational energy dissipated comes from relative motion, not from the center-of-mass motion. For a perfectly inelastic collision in the particle model,

Eloss,max=12μ∣u1−u2∣2.E_{\mathrm{loss,max}} = \frac12\mu |\mathbf{u}_1-\mathbf{u}_2|^2.

In the center-of-mass frame, the final translational kinetic energy is zero. In another inertial reference frame, the joined bodies generally retain kinetic energy. Nevertheless, the calculated kinetic-energy decrease is the same in all Galilean inertial frames when momentum is conserved.

Coefficient of restitution

For a one-dimensional impact, or for the normal component of a smooth contact, inelasticity is often characterized by the coefficient of restitution, denoted ee. It is the ratio of the relative separation speed after impact to the relative approach speed before impact.

With a consistent one-dimensional sign convention,

e=v2−v1u1−u2,e=\frac{v_2-v_1}{u_1-u_2},

where u1−u2>0u_1-u_2>0 represents approach. In the usual passive impact model:

  • e=1e=1: an elastic collision;
  • 0<e<10<e<1: a partially inelastic collision;
  • e=0e=0: no relative separation velocity immediately after impact.

Combining restitution with momentum conservation gives

v1=(m1−em2)u1+(1+e)m2u2m1+m2,v_1 = \frac{(m_1-em_2)u_1+(1+e)m_2u_2}{m_1+m_2},
v2=(m2−em1)u2+(1+e)m1u1m1+m2.v_2 = \frac{(m_2-em_1)u_2+(1+e)m_1u_1}{m_1+m_2}.

The corresponding kinetic-energy decrease is

Eloss=12μ(1−e2)(u1−u2)2.E_{\mathrm{loss}} = \frac12\mu(1-e^2)(u_1-u_2)^2.

These expressions assume fixed masses, negligible external impulse, and a one-dimensional translational model. In an oblique impact, restitution generally applies only along the contact normal. Tangential motion, friction, and rotation require additional equations. Thus, e=0e=0 in the normal direction does not necessarily imply that two objects become permanently attached.

The coefficient is not a universal constant of a material. It can depend on impact speed, temperature, geometry, surface condition, and previous damage. Values greater than one can occur when stored internal energy is released; such impacts are called superelastic collisions.

Worked example

A 2 kg2\,\mathrm{kg} cart moving at 3 m s−13\,\mathrm{m\,s^{-1}} collides with a stationary 1 kg1\,\mathrm{kg} cart, and the carts couple together. If the external horizontal impulse is negligible, their final velocity is

V=2(3)+1(0)2+1=2 m s−1.V=\frac{2(3)+1(0)}{2+1} =2\,\mathrm{m\,s^{-1}}.

The initial kinetic energy is

Ki=12(2)(32)=9 J,K_i=\frac12(2)(3^2)=9\,\mathrm{J},

while the final kinetic energy is

Kf=12(3)(22)=6 J.K_f=\frac12(3)(2^2)=6\,\mathrm{J}.

Thus, 3 J3\,\mathrm{J} has been transferred out of translational kinetic energy, while momentum remains 6 kg m s−16\,\mathrm{kg\,m\,s^{-1}}. The energy difference may appear as deformation, vibration, sound, and increased internal energy.

Microscopic inelastic collisions

In quantum mechanics, inelastic collisions are commonly discussed as inelastic scattering. The collision changes an internal state of one or more participants or produces a different set of outgoing particles. Literal surface contact is unnecessary.

Examples include:

  • an electron losing kinetic energy while exciting an atom;
  • a collision causing molecular rotation or vibration to change;
  • ionization, in which sufficient energy is transferred to remove an electron;
  • neutron scattering that creates or absorbs a phonon in a solid;
  • high-energy interactions that produce new particles.

Because internal energy levels can be discrete, some inelastic processes require a threshold collision energy. Translational kinetic energy can also increase when an initially excited participant releases internal energy. This is the microscopic counterpart of a superelastic collision.

In relativistic particle reactions, separate conservation of the sum of the particles’ rest masses is not generally valid. Instead, energy and momentum are conserved together, consistent with special relativity and mass–energy equivalence.

Applications and modeling limits

Inelastic-collision models are used in vehicle-impact analysis, protective structures, granular materials, planetary accretion, and impact testing. Microscopic inelastic scattering is also central to spectroscopy, where changes in a probe’s energy reveal internal excitations of a material.

A simple momentum-and-restitution model predicts velocities before and after impact but does not, by itself, determine peak force, contact duration, stress distribution, or damage. Those quantities require a model of deformation and material response. Fragmentation, multiple simultaneous contacts, adhesion, and substantial rotation can also make a single restitution coefficient inadequate.

The choice of system boundary remains essential. A body striking a fixed wall does not conserve its own momentum; the wall, its supports, and ultimately the Earth receive an impulse. Likewise, energy carried away by sound or fragments must be included when evaluating the full energy balance.