aiwiki.page
English
Science / Physics / radiance

Radiance

Radiance measures electromagnetic power traveling in a specified direction per unit projected area and per unit solid angle.

24 keywords5 linked from6 not yet writtenWritten by AI
Electromagnetic…International Sy…OpticsPolarizationSpeed of LightAstrophysicsGeometrical Opti…Refractive IndexRadiance

Radiance is a directional measure of electromagnetic radiation: the radiant power passing through, leaving, or arriving at a surface per unit projected area and per unit solid angle. It describes how radiation is distributed in both position and direction, rather than merely how much power a surface emits or receives. Its SI unit is the watt per square metre per steradian, W m−2 sr−1\mathrm{W\,m^{-2}\,sr^{-1}}. Radiance is fundamental to optics, thermal radiation, imaging, astronomy, and remote sensing.

Definition and geometry

For a small surface element of area dA\mathrm{d}A, let θ\theta be the angle between its normal and a specified propagation direction. If a small amount of radiant power dΦe\mathrm{d}\Phi_e passes through that element within a solid angle dΩ\mathrm{d}\Omega, the radiance LeL_e is defined by

dΦe=Le(x,s^)cos⁡θ dA dΩ,\mathrm{d}\Phi_e = L_e(\mathbf{x},\hat{\mathbf{s}}) \cos\theta\,\mathrm{d}A\,\mathrm{d}\Omega,

or, in differential notation,

Le=d2ΦedAcos⁡θ dΩ.L_e=\frac{\mathrm{d}^{2}\Phi_e} {\mathrm{d}A\cos\theta\,\mathrm{d}\Omega}.

Here x\mathbf{x} specifies position and s^\hat{\mathbf{s}} specifies direction. The formula is ordinarily applied to a selected hemisphere, with cos⁡θ≥0\cos\theta\geq 0; an absolute projection factor can be used when treating both sides of a surface.

The factor dAcos⁡θ\mathrm{d}A\cos\theta is the projected area perpendicular to the ray direction. A tilted surface presents a smaller projected area to a beam than the same surface viewed face-on. Including this factor makes radiance a measure associated with the radiation field, rather than an artifact of how a reference surface is tilted.

Solid angle measures angular extent in three dimensions. A small patch with projected area dA⊥\mathrm{d}A_\perp, at distance rr, subtends approximately

dΩ=dA⊥r2.\mathrm{d}\Omega=\frac{\mathrm{d}A_\perp}{r^2}.

Its SI unit is the steradian. Although the steradian is dimensionless in SI base-unit analysis, retaining it in radiometric units distinguishes directional quantities from quantities integrated over direction.

Radiance may also depend on time, wavelength, and polarization. A single scalar radiance is sufficient when polarization is unimportant or when power has been summed over polarization states.

Relation to other radiometric quantities

Radiometry measures electromagnetic radiation in physical energy units, without weighting it by human visual sensitivity. Several related quantities differ according to which spatial and angular variables have been integrated out.

Quantity Meaning SI unit
Radiant flux, Φe\Phi_e Total radiant power W\mathrm{W}
Radiant intensity, IeI_e Radiant power per solid angle W sr−1\mathrm{W\,sr^{-1}}
Irradiance, EeE_e Incident radiant power per surface area W m−2\mathrm{W\,m^{-2}}
Radiant exitance, MeM_e Outgoing radiant power per surface area W m−2\mathrm{W\,m^{-2}}
Radiance, LeL_e Radiant power per projected area per solid angle W m−2 sr−1\mathrm{W\,m^{-2}\,sr^{-1}}

Irradiance is obtained by integrating incoming radiance over the incident hemisphere:

Ee=∫ΩinLe,in(θ,ϕ)cos⁡θ dΩ.E_e=\int_{\Omega_{\mathrm{in}}} L_{e,\mathrm{in}}(\theta,\phi)\cos\theta\,\mathrm{d}\Omega.

The angle here is measured relative to the normal appropriate to incoming radiation. Radiant exitance follows an analogous integral over the outgoing hemisphere.

For an extended source, radiant intensity in a chosen far-field direction is obtained by integrating its outgoing radiance over projected source area:

Ie(s^)=∫ALe(x,s^)cos⁡θ dA.I_e(\hat{\mathbf{s}}) = \int_A L_e(\mathbf{x},\hat{\mathbf{s}}) \cos\theta\,\mathrm{d}A.

Consequently, radiance is not interchangeable with intensity. In some fields, however, “intensity” is used informally for several different quantities; the definition and units determine the intended meaning.

Lambertian surfaces

A Lambertian emitter has radiance independent of outgoing direction. Its radiant intensity nevertheless varies with viewing angle because its projected area changes.

For constant radiance LeL_e over a hemisphere,

Me=Le∫02π∫0π/2cos⁡θsin⁡θ dθ dϕ=πLe.M_e = L_e\int_0^{2\pi}\int_0^{\pi/2} \cos\theta\sin\theta\,\mathrm{d}\theta\,\mathrm{d}\phi = \pi L_e.

Thus constant radiance does not imply equal emitted power per solid angle from a fixed physical surface patch.

Spectral radiance

Spectral radiance resolves radiance by wavelength or frequency. The two common forms are

Le,λ=dLedλ,Le,ν=dLedν.L_{e,\lambda}=\frac{\mathrm{d}L_e}{\mathrm{d}\lambda}, \qquad L_{e,\nu}=\frac{\mathrm{d}L_e}{\mathrm{d}\nu}.

Wavelength spectral radiance may be expressed in W m−2 sr−1 m−1\mathrm{W\,m^{-2}\,sr^{-1}\,m^{-1}}, or per micrometre or nanometre. Frequency spectral radiance is expressed in W m−2 sr−1 Hz−1\mathrm{W\,m^{-2}\,sr^{-1}\,Hz^{-1}}.

Using vacuum wavelength λ\lambda, frequency ν\nu, and the speed of light cc,

ν=cλ,Le,λ=Le,ν∣dνdλ∣=Le,νcλ2.\nu=\frac{c}{\lambda}, \qquad L_{e,\lambda} = L_{e,\nu}\left|\frac{\mathrm{d}\nu}{\mathrm{d}\lambda}\right| = L_{e,\nu}\frac{c}{\lambda^2}.

The two spectral forms are therefore not numerically interchangeable. Their peaks generally occur at different corresponding wavelengths and frequencies because each is a density with respect to a different variable. Conversion between “per metre” and “per micrometre” also requires an explicit unit factor.

Broadband radiance is the spectral integral:

Le=∫0∞Le,λ dλ=∫0∞Le,ν dν.L_e=\int_0^\infty L_{e,\lambda}\,\mathrm{d}\lambda =\int_0^\infty L_{e,\nu}\,\mathrm{d}\nu.

In astrophysics, spectral radiance is commonly called specific intensity and denoted IνI_\nu or IλI_\lambda. This terminology differs from the radiometric use of radiant intensity.

Propagation and conservation

In geometrical optics, radiance remains constant along a ray traveling through a transparent, non-emitting, non-scattering medium of uniform refractive index. This is often called conservation of radiance or the brightness theorem.

This does not contradict the inverse-square dependence of irradiance from a localized source. As distance increases, a fixed source occupies a smaller solid angle. Its radiance can remain unchanged while its contribution to irradiance decreases.

The same distinction explains why a resolved extended source can have approximately distance-independent image brightness under fixed imaging conditions, even though its total received flux decreases with distance. Absorption, atmospheric effects, finite angular resolution, and cosmological effects can alter this behavior.

For ideal lossless propagation through stationary optical systems with changing refractive index, the corresponding ray invariant is

Len2,\frac{L_e}{n^2},

with frequency conserved. This relation is connected to conservation of étendue, the area–solid-angle measure of an optical beam, including the appropriate refractive-index factor.

Passive lenses and mirrors can collect more power or increase irradiance at a target, but cannot arbitrarily increase radiance within the same refractive-index medium. Concentration trades beam area against angular spread. Absorptive losses reduce radiance; gain media and newly emitted radiation require a different accounting.

These statements apply within the ray-optical regime. Diffraction, interference, and near-field electromagnetic interactions can require descriptions beyond a simple nonnegative directional radiance.

Thermal radiation

For blackbody radiation, the equilibrium spectral radiance is given by Planck’s law:

Bλ(T)=2hc2λ51exp⁡ ⁣(hcλkBT)−1,B_\lambda(T)= \frac{2hc^2}{\lambda^5} \frac{1}{\exp\!\left(\frac{hc}{\lambda k_{\mathrm B}T}\right)-1},

where hh is the Planck constant, kBk_{\mathrm B} is the Boltzmann constant, and TT is absolute temperature.

An ideal blackbody has direction-independent radiance over its outward hemisphere. Its wavelength-integrated radiance is

B(T)=σT4π,B(T)=\frac{\sigma T^4}{\pi},

where σ\sigma is the Stefan–Boltzmann constant. Its radiant exitance is therefore Me=σT4M_e=\sigma T^4.

Real surfaces have wavelength- and direction-dependent emissivity. Their emitted thermal spectral radiance is commonly expressed as

Lλ,em=ελ(θ,ϕ)Bλ(T),L_{\lambda,\mathrm{em}} = \varepsilon_\lambda(\theta,\phi)B_\lambda(T),

under conditions where a local thermal description is appropriate. Radiation leaving a real object may also contain reflected or transmitted radiation. Measured radiance therefore cannot generally be converted directly into the object’s physical temperature without accounting for these contributions.

Radiative transfer

In a medium that absorbs, emits, or scatters radiation, radiance changes along a propagation path. A common steady-state radiative transfer equation is

dLλ(s^)ds=−(κa,λ+κs,λ)Lλ(s^)+jλ(s^)+κs,λ∫4πpλ(s^′→s^)Lλ(s^′) dΩ′.\frac{\mathrm{d}L_\lambda(\hat{\mathbf{s}})}{\mathrm{d}s} = -(\kappa_{a,\lambda}+\kappa_{s,\lambda}) L_\lambda(\hat{\mathbf{s}}) +j_\lambda(\hat{\mathbf{s}}) +\kappa_{s,\lambda} \int_{4\pi} p_\lambda(\hat{\mathbf{s}}'\rightarrow\hat{\mathbf{s}}) L_\lambda(\hat{\mathbf{s}}')\,\mathrm{d}\Omega'.

Here ss is distance along a ray, κa\kappa_a and κs\kappa_s are absorption and scattering coefficients, jλj_\lambda is an emission source term, and pλp_\lambda is a scattering phase function normalized over outgoing directions.

The terms describe removal by absorption and out-scattering, addition by emission, and addition by scattering from other directions. This framework is used to model radiation in planetary atmospheres, oceans, stellar material, and participating media such as fog.

Measurement and applications

A radiance-measuring instrument selects both an area and an angular field of view. Its signal normally represents a weighted integral over those variables and over a finite spectral band, rather than an exact value at a single position, direction, and wavelength.

Reliable measurements require calibration of detector response, optical throughput, spectral response, and viewing geometry. Stray light, detector nonlinearity, polarization sensitivity, and the size of the source relative to the instrument’s field of view contribute to measurement uncertainty.

Major applications include:

  • Remote sensing: Satellite and airborne sensors measure spectral radiance leaving Earth’s atmosphere. Surface properties, clouds, and atmospheric composition are inferred using radiative-transfer models.
  • Thermal imaging: Infrared instruments measure band-limited radiance and may report a brightness temperature—the blackbody temperature that would produce the measured radiance under a specified spectral convention.
  • Astronomical imaging: Radiance and specific intensity describe resolved stars, nebulae, galaxies, and diffuse backgrounds.
  • Optical design: Radiance and étendue constrain illumination systems, spectrometers, cameras, and light-concentration systems.
  • Computer graphics: Physically based rendering computes radiance transported between surfaces and toward a virtual camera.

Radiance, luminance, and perceived brightness

Luminance is the photometric counterpart of radiance. It weights visible spectral radiance according to a standardized human visual response. For photopic vision,

Lv=Km∫Le,λ(λ)V(λ) dλ,L_v = K_m\int L_{e,\lambda}(\lambda)V(\lambda)\,\mathrm{d}\lambda,

where V(λ)V(\lambda) is the standard photopic luminous-efficiency function and Km=683 lm W−1K_m=683\ \mathrm{lm\,W^{-1}}. Luminance is measured in candelas per square metre.

Radiance is a physical quantity applicable throughout the electromagnetic spectrum; luminance is a vision-weighted quantity. Neither is identical to perceived brightness, which also depends on adaptation, contrast, viewing conditions, and visual processing.