Planographic printing is a family of printing processes in which image and non-image areas lie substantially in the same plane. Ink is selectively accepted by the image areas and rejected by the surrounding surface, principally through differences in surface chemistry rather than differences in height. Its best-known forms are lithography and offset lithography. “Planographic” describes how the printing surface distinguishes the image; “direct” and “offset” describe how that image reaches the material being printed.
Principle
A printing surface must distinguish areas that should transfer ink from those that should remain blank. In relief printing, the image stands above the non-image areas; in intaglio printing, ink is held in recessed lines or cells. Planographic printing instead uses a substantially level surface whose regions have different affinities for ink and, in conventional lithography, water.
Traditional lithographic image areas are oleophilic, meaning receptive to greasy or oil-based ink. The non-image areas are hydrophilic, meaning readily wetted by water. During printing, a thin aqueous film protects the non-image regions from ink, while the image regions accept ink from the rollers.
This is often described as the principle that oil and water do not mix. That description is useful but incomplete: successful printing also depends on selective wetting, plate treatment, ink formulation, and the interaction of the ink, dampening solution, and printing surface. Some water becomes dispersed in the ink during operation; excessive emulsification can impair printing.
The term “flat” does not mean that the surface is perfectly smooth at every scale. Plates may have microscopic roughness, pores, and thin coatings. The defining feature is that substantial image-bearing relief or engraved recesses are not the primary means of controlling ink transfer.
Historical development
Alois Senefelder developed lithography in the 1790s, conventionally dated to 1796. The original process used finely prepared limestone as the printing surface. A design was drawn with greasy materials, and chemical treatment established the different printing properties of image and non-image areas.
Lithography made it possible to reproduce freehand drawing and lettering without cutting a woodblock or engraving a metal plate. It became important for illustrations, maps, music, commercial documents, and artistic prints. In the nineteenth century, chromolithography developed into an important method of colour reproduction, using separate printing surfaces for successive colours.
Metal plates, particularly zinc and later aluminium, reduced the weight and handling difficulties associated with stone and made rotary production more practical. Photographic image preparation also allowed text and illustrations to be transferred to plates without drawing each element directly.
Offset lithography emerged commercially in the early twentieth century. Instead of transferring an image directly from the plate to paper, it transfers the image first to a rubber blanket and then to the receiving surface. This arrangement became the principal industrial form of planographic printing.
Main processes
Direct lithography
In direct lithography, the inked stone or plate transfers its image directly to the printing material. Traditional stone lithography remains important in artistic printmaking because it can reproduce the character of crayon marks, brushwork, and tonal washes.
A typical workflow includes preparing the stone, creating the image, chemically treating the surface, and repeatedly dampening and inking it before taking impressions. The chemical treatment is often called etching, but its purpose is principally to establish and stabilize the surface’s printing behaviour, not to create ink-holding grooves as in intaglio.
Because the image transfers directly, it is reversed on the finished impression relative to the printing surface. Lettering therefore requires an appropriate reversal or transfer method.
Offset lithography
A conventional offset printing unit has three principal cylinders:
- Plate cylinder: carries the printing plate.
- Blanket cylinder: receives the inked image from the plate on a resilient rubber blanket.
- Impression cylinder: supports the printing material as it passes against the blanket.
The two transfers produce an impression with the same orientation as the plate image. The blanket also conforms to small variations in the receiving surface and reduces direct contact between the plate and paper.
Offset presses may be sheet-fed, handling individual sheets, or web-fed, handling a continuous roll. Multicolour presses use successive printing units to apply different inks. The plate’s local surface chemistry, rather than its curvature around a cylinder, determines its classification as planographic.
Waterless lithography
Waterless lithography eliminates the separate dampening system. Its plates typically use a silicone-based non-image surface that resists ink, with exposed image regions that accept it.
Waterless printing shows why planography cannot be defined solely by the presence of water. It retains selective ink acceptance on a substantially level printing surface but uses a different material arrangement. Specialized inks and temperature control help maintain consistent ink behaviour.
Collotype
Collotype is commonly classified as a planographic process. It uses a photographically prepared gelatin layer whose differently treated regions vary in their response to moisture and ink. It can reproduce fine tonal gradations without a conventional halftone screen.
Collotype differs substantially from ordinary stone and offset lithography. It was historically valued for high-quality image reproduction but requires demanding preparation and operating conditions.
Plates and image preparation
Modern offset plates commonly use an aluminium base with a grained and anodized surface that supports a stable water film in non-image areas. A thin imaging layer establishes the ink-receptive pattern.
Historically, photographic film was used to expose light-sensitive plates. Contemporary production commonly uses computer-to-plate systems, which image plates directly from digital files, often with a laser. Depending on the plate technology, exposure may alter the coating chemically or enable selected coating areas to be removed.
Some plates require chemical development. Others reduce or eliminate a separate processing stage, including types whose non-image coating is removed on press. Digital plate imaging does not make the subsequent printing operation equivalent to a plateless digital press: the press still repeatedly prints from a fixed physical image.
Plate life depends on coating properties, press conditions, inks, cleaning agents, and the required run length. Some plate types can receive additional treatment to increase durability.
Tone and colour reproduction
Most conventional commercial planographic printing reproduces continuous-tone images through halftoning. Small printed dots vary in size, spacing, or distribution so that the eye perceives intermediate tones. A lighter area has less inked coverage; a darker area has more.
Full-colour production commonly uses cyan, magenta, yellow, and black inks. Each colour has its own plate and printing unit. Accurate registration, the alignment of successive colour images, is essential for sharp text, clean edges, and consistent colour.
Printing changes the apparent size and optical effect of halftone dots. Mechanical spreading and light scattering within paper can make printed tones appear darker than expected. Plate preparation, proofing, and press control therefore account for tonal changes rather than assuming that a digital dot value will reproduce identically on every material.
Applications and advantages
Planographic printing is used for books, magazines, newspapers, advertising material, maps, labels, and folding cartons. Direct lithography also remains an established artistic medium.
Its principal strengths include:
- Fine detail: suitable plates and operating conditions reproduce small text, line work, and screened images.
- Repeatability: a prepared plate can produce many consistent impressions.
- Efficient longer runs: plate preparation and press setup costs can be distributed across large quantities.
- Flexible image preparation: drawing, photographic methods, and digital workflows can all provide the original image.
- Adaptability through offset transfer: the blanket permits printing on papers and boards with a range of surface characteristics.
These advantages are conditional. The economic balance against other printing methods depends on quantity, format, material, turnaround time, and finishing requirements.
Limitations and process control
Conventional wet lithography requires a controlled balance between ink and dampening solution. Insufficient dampening can allow ink to contaminate non-image areas, a defect commonly called scumming. Excessive dampening can promote ink emulsification, weaken ink transfer, or affect paper dimensions.
Other important variables include plate condition, roller settings, blanket condition, press speed, ink temperature, and the pH and composition of the dampening solution. Colour consistency also depends on ink-film thickness and the properties of the receiving material.
Offset production normally involves makeready: mounting plates, establishing ink and water settings, and bringing registration and colour into specification. This consumes time and material, which can make very short runs less economical than digital printing. Fixed plates also make changing every impression impractical, whereas variable-data digital presses can alter content from sheet to sheet.
Environmental burdens can include waste paper, spent plates, cleaning agents, processing chemicals, and emissions from some ink and solvent systems. Their extent varies with press technology and operating practice. Processless plates, lower-solvent cleaning systems, improved controls, and material recycling can reduce particular waste streams, but no single plate or ink technology determines the environmental performance of the entire operation.