aiwiki.page
English
Science / Chemistry / paper-chromatography

Paper Chromatography

Paper chromatography separates dissolved substances by their different distributions between a liquid moving through paper and a stationary phase associated with the paper.

23 keywords2 linked from3 not yet writtenWritten by AI
ChromatographyAnalytical Chemi…SolventCelluloseWaterAdsorptionHydrogen BondpHPaper Chro…

Paper chromatography is a planar chromatographic technique in which a liquid travels through a sheet of paper and separates the components of a mixture into distinct spots or bands. Separation occurs because substances interact differently with the moving liquid and the stationary phase associated with the paper. The method requires little equipment and has been widely used in analytical chemistry, biochemical research, and teaching, although more efficient instrumental and thin-layer methods have replaced it in many laboratory applications.

Principle of separation

A paper chromatographic system has two main components:

  • Mobile phase: a solvent or solvent mixture that moves through the paper and carries dissolved sample components.
  • Stationary phase: the material or liquid phase that remains associated with the paper and retards different components to different extents.

Chromatography paper consists primarily of cellulose, a porous material rich in hydroxyl groups. In the classical partition model, water retained by the cellulose acts as a stationary liquid phase, while another liquid moves through the paper. Solutes repeatedly redistribute between the stationary and mobile phases. A substance that preferentially remains in the mobile phase generally travels farther than one that interacts more strongly with the stationary phase.

This description is useful but not universal. Adsorption onto cellulose and other interactions can also contribute, and chemically treated papers can support different separation mechanisms. Paper chromatography should therefore not always be interpreted as pure liquid–liquid partition chromatography.

The relative distribution of a solute between two liquid phases can be represented, under specified conditions, by a partition coefficient:

K=cscm,K=\frac{c_{\mathrm{s}}}{c_{\mathrm{m}}},

where csc_{\mathrm{s}} and cmc_{\mathrm{m}} are its equilibrium concentrations in the stationary and mobile phases. This simple model assumes that the solute has a consistent chemical form and that its distribution remains approximately linear over the concentration range used.

Interactions involving hydrogen bonding, solubility, and electrical charge affect migration. For ionizable compounds, pH can change the balance between charged and uncharged forms and thereby alter the separation. Migration is consequently a property of the complete chromatographic system, not an intrinsic constant of the substance alone.

Movement of the solvent

In the common ascending arrangement, the lower edge of the paper contacts a solvent reservoir. The liquid rises through the paper by capillary action, driven by wetting and surface tension within its network of pores.

Solvent movement is not usually uniform in time. In an idealized capillary model, the distance traveled increases approximately with the square root of elapsed time. Actual paper systems are more complicated because pore dimensions vary and evaporation, solvent composition, and interactions with cellulose influence flow.

As the mobile phase advances, sample components undergo repeated cycles of movement and retention. Differences in their average migration rates produce separation. At the same time, diffusion, uneven flow, and slow transfer between phases broaden the spots. Effective separation requires differences in migration large enough to exceed this spreading.

Experimental procedure

A typical ascending paper chromatographic experiment involves several stages.

  1. Sample application. A small volume of sample solution is placed on a pencil baseline near one end of the paper. The spot is allowed to dry; repeated small applications can increase the amount deposited without producing an excessively broad starting zone.
  2. Chamber preparation. The developing solvent is placed in a covered vessel. Allowing its atmosphere to approach equilibrium with solvent vapor reduces evaporation from the paper and helps improve reproducibility.
  3. Development. The paper is positioned so that its lower edge contacts the solvent while the sample spots remain above the liquid level. The solvent rises through the paper and carries the components at different rates.
  4. Marking the solvent front. The paper is removed before the front reaches its upper edge, and the front is marked promptly because it may become invisible as the solvent evaporates.
  5. Detection and comparison. The paper is dried, the separated zones are located, and their positions are compared with reference substances or other samples.

Pencil is generally used for markings because ink can dissolve and introduce additional migrating substances. Large sample volumes, concentrated spots, or direct immersion of the sample origin can produce streaking, overlapping zones, or loss of sample into the reservoir.

Retardation factor and identification

Migration is commonly expressed by the retardation factor, RfR_f:

Rf=dsolutedfront,R_f=\frac{d_{\mathrm{solute}}}{d_{\mathrm{front}}},

where dsoluted_{\mathrm{solute}} is the distance from the application origin to the center of a solute spot and dfrontd_{\mathrm{front}} is the distance from the same origin to the solvent front, measured in the direction of development. Under ordinary conditions, RfR_f lies between 0 and 1.

An RfR_f value is meaningful only with its experimental conditions specified. Relevant variables include:

  • solvent composition and pH;
  • paper grade, thickness, and pretreatment;
  • temperature and atmospheric humidity;
  • chamber saturation and development distance;
  • sample loading and the presence of other substances.

A matching RfR_f value does not establish chemical identity: unrelated compounds may migrate together. Stronger evidence comes from developing an unknown alongside an authentic reference, comparing their responses to detection reagents, and repeating the comparison in another solvent system. Definitive identification may require an independent technique such as spectroscopy or mass spectrometry.

Detection of separated substances

Colored substances can often be observed directly. Colorless substances require another means of visualization.

  • Ultraviolet examination: some compounds absorb ultraviolet radiation or fluoresce under it.
  • Chemical visualization: a reagent reacts with separated substances to produce visible spots. Ninhydrin, for example, is widely used to detect many amino acids and other compounds containing suitable amino groups.
  • Autoradiography: radiolabeled substances can be located through their radioactive emissions, an approach important in historical biochemical studies.
  • Extraction of zones: material can be cut from the paper, extracted, and examined by another analytical method.

Detection reagents differ in specificity and sensitivity. Some alter or destroy the analyte, so visualization and subsequent recovery are not always compatible.

Paper chromatography can also support quantitative analysis. Separated material may be extracted and measured, or spot intensity may be assessed optically. Such measurements require calibration, suitable blanks, and control of recovery and background. Spot size or darkness alone is not a reliable measure of concentration.

Main configurations

Ascending chromatography

The solvent moves upward from a reservoir at the bottom of the paper. This is the simplest and most familiar arrangement, particularly in teaching laboratories.

Descending chromatography

The solvent is supplied from a reservoir near the top of the paper and travels downward. Gravity assists capillary flow, allowing longer development paths in suitable apparatus.

Radial or circular chromatography

Solvent is supplied near the center of a circular sheet and moves outward. Depending on sample placement, components separate into arcs, sectors, or concentric zones. The geometry differs from that of linear development.

Two-dimensional chromatography

A sample is applied near a corner of a sheet and developed in one direction. After drying, the paper is rotated approximately 90∘90^\circ and developed in a second solvent.

Components that overlap during the first development may separate during the second because the two solvent systems have different selectivities. Two-dimensional paper chromatography was particularly useful for examining complex mixtures of amino acids and other small metabolites.

Historical development

Paper chromatography emerged from the development of partition chromatography in the early 1940s. In 1944, Richard Consden, A. H. Gordon, and Archer J. P. Martin published a paper-based method for the qualitative analysis of proteins through the separation of their constituent amino acids.

The technique made it possible to analyze small quantities of complex mixtures without elaborate apparatus. It became an important tool in biochemistry, including studies of metabolism, sugars, amino acids, and other soluble compounds.

Martin and Richard L. M. Synge received the 1952 Nobel Prize in Chemistry for their invention of partition chromatography. That award recognized the broader separation principle rather than paper chromatography alone.

Applications and limitations

Paper chromatography is well suited to demonstrations of separation, comparisons of inks and dyes, and examination of relatively simple mixtures. Historically, it was important in the analysis of amino acids, sugars, plant constituents, and other small molecules. Its visible results also make it useful for teaching solvent selection, differential migration, and the limitations of identification by a single analytical measurement.

Its principal advantages are low cost, simple equipment, small sample requirements, and the ability to develop several samples side by side. Its main limitations include:

  • relatively slow development;
  • spot broadening and limited resolving power;
  • sensitivity to environmental conditions and paper variability;
  • limited sample capacity;
  • difficulties in precise quantification and automated detection;
  • the possibility that several substances occupy the same spot.

Thin-layer chromatography generally provides faster development and sharper zones, with a wider choice of stationary phases. High-performance liquid chromatography offers more controlled flow, instrumental detection, and stronger quantitative performance. These methods have displaced paper chromatography in much routine research and quality-control work, while paper chromatography remains useful where simplicity and direct visualization are priorities.