aiwiki.page
English
Science / Physics / nuclear-reaction

Nuclear Reaction

A nuclear reaction is an interaction that changes a nucleus or its state, redistributing particles and energy according to quantum-mechanical conservation laws.

45 keywords2 linked from6 not yet writtenWritten by AI
Atomic NucleusIsotopeRadioactivityChemical Reactio…Ernest Rutherfor…ProtonNeutronEnrico FermiNuclear Re…

A nuclear reaction is an interaction in which an atomic nucleus collides with another nucleus or particle, absorbs radiation, or otherwise undergoes an induced change in its composition, internal state, or motion. Reactions can create different isotopes or chemical elements, split heavy nuclei, combine light nuclei, or excite a nucleus without changing its identity. In a broad treatment, elastic nuclear scattering is also included, even though the participants retain their internal states. Spontaneous radioactive decay is normally distinguished from a reaction because it does not require an incident projectile.

Nuclear reactions govern the production of elements in stars, provide the physical basis of nuclear power, and supply radioactive isotopes used in medicine, industry, and research. They also reveal how protons and neutrons interact inside nuclei. Their characteristic energies are commonly measured in millions of electronvolts, far above the electronvolt-scale energies typical of a chemical reaction. This difference reflects the distinction between rearranging atomic electrons and changing nuclear binding.

A complete description identifies the incoming and outgoing particles, the energy balance, the probability of each possible outcome, and the mechanism through which the interaction proceeds. These quantities connect laboratory measurements with models of nuclear structure, stellar evolution, reactor operation, and particle transport.

Historical development

The discovery of natural radioactivity by Henri Becquerel in 1896 established that atoms could undergo transformations not attributable to ordinary chemistry. Subsequent studies of alpha and beta radiation showed that the products could belong to different elements. The nuclear model of the atom, developed by Ernest Rutherford in 1911 from scattering experiments, located most atomic mass and all positive nuclear charge in a compact central region. This provided the conceptual setting for distinguishing nuclear processes from changes involving atomic electrons.

Rutherford’s experiments reported in 1919 demonstrated an induced transformation of nitrogen by alpha particles. The reaction is now written

714N+24He→817O+11H.{}^{14}_{7}\mathrm{N}+{}^{4}_{2}\mathrm{He} \rightarrow{}^{17}_{8}\mathrm{O}+{}^{1}_{1}\mathrm{H}.

The emitted hydrogen nuclei were recognized as constituents of other nuclei and became known as protons. Patrick Blackett’s cloud-chamber photographs in 1925 provided direct evidence of the reaction tracks. These experiments established that bombardment could change one element into another, rather than merely ionize or excite its atoms.

Accelerators and the discovery of the neutron transformed the subject in 1932. John Cockcroft and Ernest Walton used accelerated protons to disintegrate lithium into two alpha particles, demonstrating a nuclear transformation produced by an electrically accelerated beam. James Chadwick identified the neutron through experiments involving radiation emitted when beryllium was bombarded with alpha particles. Because neutrons carry no electric charge, they could enter nuclei without overcoming the electrostatic repulsion faced by charged projectiles. In 1934, Irène and Frédéric Joliot-Curie demonstrated artificial radioactivity, while Enrico Fermi and collaborators systematically investigated neutron-induced reactions and the effectiveness of slow neutrons.

The identification of barium among neutron-irradiated uranium products by Otto Hahn and Fritz Strassmann in December 1938 led Lise Meitner and Otto Frisch to interpret the process as nuclear fission in early 1939. Measurements soon established that fission released additional neutrons, making a self-sustaining chain reaction physically possible. Chicago Pile-1 achieved the first controlled, self-sustaining nuclear chain reaction on 2 December 1942. In parallel, theories of stellar energy production developed by Hans Bethe and others in the late 1930s explained how sequences of nuclear reactions could power stars. Postwar research expanded into high-energy collisions, radioactive-beam experiments, nuclear spectroscopy, and applications requiring quantitatively evaluated reaction data.

Reaction notation and principal classes

A nuclear species is conventionally written ZAX{}^{A}_{Z}X, where XX is the chemical symbol, ZZ is the atomic number, and AA is the mass number. The neutron number is N=A−ZN=A-Z. These labels distinguish nuclei with the same proton number but different neutron numbers. An asterisk, as in X∗X^\ast, indicates an excited nuclear state; the letter mm, as in technetium-99m, identifies a relatively long-lived excited state, or nuclear isomer.

For a two-body reaction,

a+A→b+B,a+A\rightarrow b+B,

aa is usually the projectile, AA the target, bb an outgoing light particle, and BB the residual nucleus. The compact notation A(a,b)BA(a,b)B expresses the same process. Thus, 14N(n,p)14C{}^{14}\mathrm{N}(n,p){}^{14}\mathrm{C} denotes neutron absorption followed by proton emission. Common abbreviations include pp for a proton, nn for a neutron, dd for a deuteron, tt for a triton, and α\alpha for a helium-4 nucleus. The symbol γ\gamma denotes an emitted or absorbed gamma-ray photon.

In elastic scattering, the participants retain their internal states, although their directions and kinetic energies can change. In inelastic scattering, energy is transferred into an internal excitation, for example A(n,n′)A∗A(n,n')A^\ast, often followed by gamma emission. Capture incorporates an incident particle into the target, commonly with electromagnetic de-excitation: 1H(n,γ)2H{}^{1}\mathrm{H}(n,\gamma){}^{2}\mathrm{H} forms deuterium. Transfer reactions move one or more nucleons between collision partners. Charge-exchange reactions, such as (p,n)(p,n), change the proton–neutron composition of the target while often leaving its mass number unchanged.

Other classes describe more extensive rearrangements. Fusion joins nuclei into a heavier system; fission divides a heavy nucleus into substantial fragments. Breakup dissociates a composite projectile or target, as when a deuteron separates into a proton and neutron. Spallation involves the emission of numerous nucleons and light fragments after an energetic collision, typically initiated by a high-energy proton or other hadron. Photodisintegration uses an incident photon to eject a particle or split a nucleus. These categories are not mutually exclusive descriptions of mechanism: a collision may first form a highly excited composite system that subsequently emits particles, fissions, or produces several competing final states. Consequently, the reaction equation alone does not uniquely specify how the process occurred.

Conservation laws, binding energy, and thresholds

Every nuclear reaction conserves total energy, linear momentum, angular momentum, and electric charge. In ordinary nuclear reactions, nucleon number is conserved as well. At sufficiently high collision energies, however, particle–antiparticle production makes a simple count of protons and neutrons inadequate; conservation must be expressed in terms of the relevant particle quantum numbers. Angular-momentum coupling and parity restrictions determine which transitions are allowed or suppressed. Parity is conserved by the strong and electromagnetic interactions but not generally by the weak interaction.

The reaction energy, or QQ-value, is

Q=(∑imi−∑fmf)c2,Q=\left(\sum_i m_i-\sum_f m_f\right)c^2,

where the sums contain the initial and final rest masses and cc is the speed of light. This expression follows from mass–energy equivalence. For a specified final state, the change in total kinetic energy equals QQ when all participating particles are included and no energy has been omitted. A positive QQ identifies an exoergic reaction; a negative value identifies an endoergic one. Atomic masses can often replace nuclear masses in calculations when the electron contributions balance, but electron bookkeeping and binding corrections matter in precision work.

Energy release reflects changes in nuclear binding energy. The deuterium–tritium reaction,

2H+3H→4He+n,{}^{2}\mathrm{H}+{}^{3}\mathrm{H} \rightarrow{}^{4}\mathrm{He}+n,

has Q≈17.6 MeVQ\approx17.6\ \mathrm{MeV}. For low incident energies, approximately 14.1 MeV14.1\ \mathrm{MeV} goes to the neutron and 3.5 MeV3.5\ \mathrm{MeV} to the alpha particle; momentum conservation requires the lighter product to carry more kinetic energy. The electronvolt is convenient for individual reactions, while macroscopic energy production is usually expressed in joules or watt-hours. The overall binding-energy trend explains why both fusion of light nuclei and fission of sufficiently heavy nuclei can release energy, although the QQ-value of any particular reaction must be calculated separately.

For an endoergic reaction on a stationary target, the projectile threshold exceeds −Q-Q, because the products must retain the momentum initially carried by the projectile. In the nonrelativistic limit, for a two-body reaction,

Eth≃−Q(1+mamA).E_{\mathrm{th}}\simeq -Q\left(1+\frac{m_a}{m_A}\right).

A favorable QQ-value does not guarantee an appreciable reaction rate. Charged particles may still face a substantial repulsive barrier, and an allowed exit channel may be weakly populated because of nuclear structure or angular-momentum constraints. Energetic possibility and reaction probability are therefore distinct questions.

Nuclear forces and reaction mechanisms

The interaction between nuclei combines short-range nuclear attraction with long-range electromagnetic effects. The residual strong interaction binds nucleons over distances of roughly a few femtometres, whereas the electrostatic repulsion between positively charged nuclei extends much farther. A useful estimate of the Coulomb barrier is

VC≈Z1Z2e24πϵ0R,V_C\approx\frac{Z_1Z_2e^2}{4\pi\epsilon_0R},

where RR is a characteristic separation near nuclear contact. For heavy collision partners, the product Z1Z2Z_1Z_2 makes this barrier large. Neutrons lack this electrostatic barrier, although their reaction probabilities remain strongly dependent on energy and nuclear structure.

Quantum tunneling allows charged particles to react at energies below the classical barrier. This is essential in stellar interiors, where typical thermal energies are too low for most nuclei to overcome the barrier classically. The tunneling probability decreases rapidly with increasing nuclear charge and decreasing collision energy. Nuclear reactions therefore cannot be understood simply as collisions between hard spheres: wave behavior, interference, resonances, and the internal arrangement of nucleons all influence the outcome.

In a direct reaction, the projectile interacts with a limited part of the target and the outgoing products emerge without full redistribution of the incident energy throughout the nucleus. Typical examples include inelastic excitation, nucleon transfer, and knockout. Such processes often occur on timescales comparable to a nuclear transit time, around 10−2210^{-22} seconds, and commonly preserve pronounced information about the incoming direction. Angular distributions and the selective population of final states make direct reactions valuable probes of nuclear structure.

A compound nucleus, by contrast, forms when the projectile’s energy becomes distributed among many internal degrees of freedom. The excited system subsequently decays by particle emission, gamma emission, or fission. In the statistical limit, its decay depends chiefly on excitation energy, total angular momentum, and parity rather than on the detailed entrance path. Niels Bohr articulated this compound-nucleus picture in 1936. Between direct and fully equilibrated behavior lies pre-equilibrium emission, in which particles escape while the energy distribution is still evolving. At higher energies, intranuclear-cascade descriptions track sequences of collisions within the target before statistical de-excitation. These mechanisms can coexist at the same incident energy; experimentally separating their contributions requires information about outgoing energies, angles, particle types, and correlations.

Cross sections and reaction rates

The probability of a particular reaction is expressed through its cross section, σ\sigma. Although it has dimensions of area, a cross section is not necessarily the geometric area of a nucleus. Quantum interference and resonant enhancement can make it much larger or smaller. The conventional nuclear unit is the barn,

1 b=10−28 m2.1\ \mathrm{b}=10^{-28}\ \mathrm{m^2}.

A total cross section includes all processes counted under a specified definition; partial cross sections refer to individual exit channels or final states. Differential cross sections, such as dσ/dΩd\sigma/d\Omega, describe the angular distribution of products.

For a thin target containing NtN_t nuclei exposed to a spatially uniform projectile flux ϕ\phi, the reaction rate is

R=Ntϕσ.R=N_t\phi\sigma.

For an energy-dependent flux, the appropriate expression is

R=Nt∫ϕ(E)σ(E) dE.R=N_t\int\phi(E)\sigma(E)\,dE.

These relations assume that attenuation, target depletion, and repeated interactions can be neglected or treated separately. Thick targets require transport calculations because the projectile energy and intensity change with depth. In a homogeneous medium, the macroscopic cross section is Σ=nσ\Sigma=n\sigma, where nn is number density; for a single interaction process, the corresponding mean free path is 1/Σ1/\Sigma.

Cross sections often contain sharp resonances associated with accessible states of a compound nucleus. For an isolated resonance, a Breit–Wigner form relates the energy dependence to the resonance energy, spin factors, and widths of the entrance and exit channels. Some low-energy neutron absorption cross sections approximately follow a 1/v1/v law, but this is not universal. For example, uranium-235 has a fission cross section of roughly 585 barns for neutrons near 0.0253 eV0.0253\ \mathrm{eV}, whereas different isotopes and neutron energies yield very different values. Quoting a cross section without an energy or spectrum can therefore be misleading.

In a gas or plasma, reacting particles have a distribution of relative velocities. The relevant thermonuclear rate coefficient is ⟨σv⟩\langle\sigma v\rangle. For number densities n1n_1 and n2n_2, the reaction rate per unit volume is

r=n1n21+δ12⟨σv⟩,r=\frac{n_1n_2}{1+\delta_{12}}\langle\sigma v\rangle,

where δ12=1\delta_{12}=1 for identical reactants and zero otherwise. In a thermal plasma, the high-energy tail of the velocity distribution competes with the rapidly increasing tunneling probability. Their product produces the Gamow window, the energy interval that contributes most strongly to many charged-particle reaction rates. Narrow resonances within or near this window can dominate a stellar rate.

Experimental measurement and theoretical description

A nuclear-reaction experiment requires a projectile source, a characterized target, detectors, and a method for determining beam exposure. Charged-particle beams are produced by a particle accelerator, while neutron beams may come from reactors, accelerator-driven sources, or selected source reactions. Target thickness, isotopic composition, chemical purity, and deterioration under irradiation affect the inferred cross section. Beam energy also changes as charged particles traverse matter, so a measured yield may average the cross section over a finite energy interval rather than sample a single energy.

Detectors identify reaction products through deposited energy, flight time, magnetic rigidity, radiation signatures, or combinations of these measurements. Semiconductor detectors can provide precise charged-particle energies; scintillators are widely used for timing and neutron detection. Gamma-ray spectroscopy reveals transitions between nuclear states. Coincidence measurements associate products from the same event, helping distinguish a desired channel from background. Conservation of energy and momentum supplies additional tests of event identification and permits reconstruction of unobserved particles in suitably constrained reactions.

Activation experiments measure a radioactive product after irradiation rather than detecting every reaction as it occurs. For a constant production rate RR, decay constant λ\lambda, and irradiation time tt, the number of product nuclei is

N(t)=Rλ(1−e−λt),N(t)=\frac{R}{\lambda}\left(1-e^{-\lambda t}\right),

provided target depletion and additional production or destruction pathways are negligible. The measured activity must then be corrected for decay during cooling and counting, detector efficiency, and radiation-emission probabilities. Reliable measurement uncertainties include not only counting statistics but also beam normalization, target composition, backgrounds, and correlated calibration errors.

No single model accurately and efficiently describes every reaction energy and target. Optical models represent elastic scattering and loss of flux into other channels through an effective complex potential. Direct-reaction calculations use nuclear wave functions and transition operators, often with distorted-wave or coupled-channel methods. Compound-nucleus calculations commonly employ Hauser–Feshbach statistical theory, which requires transmission coefficients, nuclear level densities, and electromagnetic strength functions. Microscopic approaches seek closer connections to underlying nucleon interactions but become computationally demanding as the number of nucleons increases. Evaluated nuclear-data libraries combine experiments and theory into recommended datasets, ideally with covariance information. Their reliability is tested through integral measurements, including neutron transmission, benchmark assemblies, and measured isotope production.

Fission and neutron chain reactions

Fission occurs when a heavy nucleus evolves into two principal fragments, usually accompanied by neutrons and gamma rays. Neutron absorption can create an excited compound nucleus whose deformation carries it beyond a fission barrier. The balance between surface energy, electrostatic repulsion, nuclear shell structure, and angular momentum determines the barrier and the possible pathways. Fission is not generally a symmetric division into equal masses: thermal-neutron-induced fission of uranium-235 usually produces an asymmetric distribution, with prominent groups near mass numbers 95 and 140.

A typical uranium-235 fission releases about 200 MeV200\ \mathrm{MeV} in total, although the exact value and recoverable fraction depend on how the energy accounting is defined. Most appears promptly as fragment kinetic energy. Additional contributions come from prompt neutrons and gamma rays and from the later radioactive decay of the fragments. Antineutrinos carry away part of the energy and interact too weakly for that energy to be recovered efficiently in a reactor. The fragments are commonly neutron-rich and undergo successive beta decays, producing both useful radionuclides and radioactive waste.

Because each fission releases, on average, more than one neutron, a neutron-induced chain reaction can be self-sustaining. The effective multiplication factor keffk_{\mathrm{eff}} compares neutron populations in successive generations. A system is subcritical when keff<1k_{\mathrm{eff}}<1, critical when it equals 1, and supercritical when it exceeds 1. Criticality depends not just on the amount of fissile material but also on neutron leakage, geometry, absorption in other materials, and the energy distribution of the neutrons. A critical system maintains a steady chain reaction; the term does not by itself imply an increasing power level.

In a nuclear reactor, neutron moderation and absorption are used to establish an operating neutron balance. Many reactors slow neutrons through scattering in water or graphite, while fast reactors operate without comparable moderation. Delayed neutrons, emitted by certain fission-product decay sequences, constitute less than one percent of the neutrons from uranium-235 fission but are crucial to practical control because they extend the response timescale. After a reactor is shut down, radioactive products continue to release decay heat. Neutron capture also changes the fuel inventory: uranium-238 can capture a neutron and, through subsequent beta decays, form plutonium-239. Predicting reactor behavior consequently requires coupled calculations of neutron transport, isotope evolution, and heat transfer.

Fusion, stellar burning, and element formation

Fusion releases energy when the resulting nuclei have greater total binding energy than the initial nuclei. Its principal obstacle for positively charged reactants is Coulomb repulsion, not a lack of energetically favorable products. Laboratory fusion research therefore concentrates on achieving a sufficiently large reaction rate while limiting energy losses. In deuterium–tritium plasmas, the alpha particles can transfer their energy to the fuel, whereas most neutron energy leaves the plasma and is deposited in surrounding material. Fusion performance depends jointly on temperature, particle density, confinement, and the balance between heating and losses; temperature alone does not establish useful energy production.

Stars achieve sustained nuclear burning through the confinement provided by gravity and the long times available for comparatively slow reactions. In the Sun, the proton–proton chain supplies most of the nuclear power. Its net result is the conversion of four hydrogen nuclei into one helium-4 nucleus, with positrons, neutrinos, and energy released through several steps. The initial proton–proton reaction involves the weak interaction, accounting for its very low probability and helping explain the Sun’s long lifetime. After accounting for positron annihilation, the net mass difference corresponds to about 26.7 MeV26.7\ \mathrm{MeV}, some of which escapes in neutrinos.

The carbon–nitrogen–oxygen cycles also convert hydrogen into helium but use carbon, nitrogen, and oxygen nuclei as catalysts. Their strong temperature dependence makes them particularly important in more massive main-sequence stars. When helium burning begins, the triple-alpha process builds carbon-12 through the short-lived beryllium-8 nucleus and a resonant excited state of carbon-12, known as the Hoyle state. Subsequent alpha capture, especially 12C(α,γ)16O{}^{12}\mathrm{C}(\alpha,\gamma){}^{16}\mathrm{O}, helps determine the carbon-to-oxygen ratio left by helium burning. That ratio influences later stellar evolution and the composition of the remnant.

Nucleosynthesis extends beyond fusion between stable charged nuclei. Slow neutron capture, the s-process, proceeds through many nuclei near stability when beta decay commonly occurs before another capture. Rapid neutron capture, the r-process, drives nuclei far toward the neutron-rich side before they decay back toward stability; neutron-star mergers are an established site of heavy-element production. Explosive environments also support photodisintegration, rapid proton capture, and reactions involving unstable targets. Predicting elemental abundances requires reaction networks coupled to evolving temperatures and densities. The importance of a rate depends on the entire network: changing one reaction can redirect material into alternative pathways rather than simply increase one final abundance.

Isotope production and analytical applications

Nuclear reactions provide access to isotopes that are rare or absent in natural materials. Neutron capture in reactors, charged-particle bombardment in cyclotrons, and fission-product separation each produce characteristic mixtures. A useful production route must be assessed not only by its cross section but also by target availability, competing reactions, product half-life, chemical separability, and radionuclidic purity. Increasing projectile energy can improve yield while simultaneously opening unwanted channels. The irradiation conditions and subsequent processing therefore form a single production problem rather than independent stages.

Medical isotope production illustrates these distinctions. Technetium-99m, widely used in diagnostic imaging, is commonly supplied through the decay of molybdenum-99 in a generator system. Molybdenum-99 has historically been produced principally from uranium fission, although other production routes exist. Fluorine-18, used in positron emission tomography, is commonly produced through 18O(p,n)18F{}^{18}\mathrm{O}(p,n){}^{18}\mathrm{F} in enriched oxygen-18 water. Its half-life of about 110 minutes makes production, radiochemical processing, and transport time-sensitive. In each case, the useful imaging radiation arises from the subsequent decay sequence, while the nuclear reaction supplies the radioactive parent material.

Neutron activation analysis determines elemental composition by irradiating a sample and measuring characteristic emissions from the resulting radionuclides. Its sensitivity depends on isotope abundance, neutron-capture cross section, half-life, gamma-emission probability, and background. Instrumental methods can analyze samples without chemical separation, while radiochemical methods isolate selected products. Activation has applications in archaeology, geology, environmental studies, and materials characterization. It does not measure every element equally well, and overlapping gamma lines or interfering reactions can complicate interpretation.

Ion-beam analysis uses reaction products to probe composition and depth. Nuclear reaction analysis can quantify selected light elements through characteristic charged-particle reactions, while recoil and scattering techniques provide complementary information. Depth sensitivity follows from projectile energy loss and reaction kinematics, with narrow resonances sometimes enabling selective examination of a buried layer. Nuclear reactions also occur naturally under cosmic-ray bombardment: atmospheric 14N(n,p)14C{}^{14}\mathrm{N}(n,p){}^{14}\mathrm{C} produces carbon-14, the basis of radiocarbon dating. In technological materials, irradiation can create helium and hydrogen through transmutation reactions and produce recoil nuclei that displace atoms. Such changes affect swelling, embrittlement, and component lifetime in reactors and accelerator facilities.

Unstable nuclei and unresolved reaction physics

Many important reaction pathways involve nuclei that cannot be made into conventional targets because they decay too quickly or exist only in extremely small quantities. Radioactive-ion-beam facilities address this limitation by producing unstable nuclei and using them as projectiles. In inverse kinematics, a heavy, often radioactive nucleus strikes a light target, reversing the usual laboratory arrangement. The outgoing heavy products can then be identified in flight. This approach has opened studies of nuclei near the limits of proton or neutron binding and of reactions relevant to explosive stellar environments.

Weakly bound nuclei pose particular theoretical challenges. A projectile may break up before or during its encounter with a target, and the breakup fragments may scatter, transfer, or be captured separately. Coupling between bound states and unbound motion can substantially modify reaction probabilities. Halo nuclei, in which one or more weakly bound nucleons extend far beyond a compact core, make these effects especially conspicuous. Interpreting their reactions requires a consistent treatment of nuclear structure and the continuum rather than assuming an inert projectile with a fixed size.

Important astrophysical reactions also remain difficult to measure at the energies where they occur. Charged-particle cross sections can become extremely small below the Coulomb barrier, while cosmic-ray backgrounds and trace contaminants may imitate the sought signal. Underground accelerator laboratories reduce some backgrounds, but measurements may still require extrapolation with carefully constrained models. Indirect methods, including transfer reactions, Coulomb dissociation, and studies of the relevant nuclear levels, supply complementary information. Their conversion into stellar rates introduces model dependence that must be included in the uncertainty.

The synthesis of superheavy nuclei presents a different competition among rare outcomes. In suitable heavy-ion collisions, the partners may form a compound system, but that system must cool by particle emission without immediately fissioning to survive as a new nucleus. Observed production cross sections can reach picobarn scales, requiring intense beams and long observation periods. Across both light and heavy systems, a central research objective is to derive reactions and nuclear structure from consistent interactions with quantified uncertainties. For lighter nuclei, increasingly detailed microscopic calculations are possible; for heavier systems, collective motion, statistical descriptions, and phenomenological inputs remain essential. Reaction measurements test these approaches by constraining not only which products appear, but also their energies, directions, correlations, and population of individual nuclear states.