Neutralization is a chemical reaction in which an acid reacts with a base, consuming acidic and basic components in proportions determined by the reaction. In the familiar aqueous case, hydronium ions and hydroxide ions combine to form water, while the remaining ions constitute a salt. Neutralization is a central example of an acid–base reaction, but it does not necessarily produce a solution with a pH of 7: the final pH depends on the substances involved, their relative amounts, and temperature.
Chemical basis
Aqueous acids and bases
For a strong acid reacting with a strong hydroxide base in dilute aqueous solution, the essential reaction is
It is often abbreviated as
The notation represents a hydrated proton, not an isolated proton freely present in water.
Hydrochloric acid and sodium hydroxide provide a standard example:
Both reactants are strong electrolytes and are extensively dissociated in dilute solution. Sodium and chloride ions remain in solution without undergoing the principal acid–base change. Such species are called spectator ions; removing them from the complete ionic equation gives the net ionic equation above.
The salt need not appear as a solid. In this example, sodium chloride remains dissolved unless conditions cause it to crystallize.
Proton-transfer interpretation
In the Brønsted–Lowry description, an acid donates a proton and a base accepts one. This framework includes neutralizations that do not have hydroxide as a reactant or water as a product. For example, ammonia accepts a proton from hydronium:
Hydrogen chloride and ammonia can also react outside aqueous solution to form ammonium chloride:
Thus, “acid + base → salt + water” describes an important class of neutralizations rather than every possible acid–base reaction. The broader Lewis theory treats acid–base reactions as electron-pair acceptance and donation, although neutralization is used most commonly for proton-transfer reactions and the removal of acidity or alkalinity.
Stoichiometry and extent of reaction
Neutralization follows stoichiometry, not necessarily a one-to-one ratio between reactant molecules. For example, complete neutralization of sulfuric acid by sodium hydroxide requires two moles of the base per mole of acid:
For specified acid and base reactions, the equivalence condition can be written
where is molar concentration, is volume, and is the number of proton equivalents supplied or accepted per formula unit in that reaction. The values of depend on the intended extent of reaction: a polyprotic acid can be neutralized in stages.
Neutralization does not imply that every reaction proceeds completely. For a general proton transfer,
the equilibrium constant is related to the acid strengths by
Proton transfer is favored toward the side containing the weaker acid and weaker base. Strong acid–strong base neutralization is overwhelmingly product-favored in ordinary dilute aqueous conditions, whereas some weak acid–weak base combinations undergo only limited proton transfer.
Equivalence is not the same as neutral pH
The equivalence point is the condition at which acid and base have reacted in the proportions required by the specified balanced equation. A pH-neutral solution, by contrast, has equal hydrogen-ion and hydroxide-ion activities.
For water, the ion product is
where denotes thermodynamic activity. With the usual aqueous conventions, neutrality therefore corresponds to
At approximately , this is close to pH 7. Because varies with temperature, neutral pH is not always 7.
The pH at equivalence also depends on the salt formed:
| Reactants | Typical pH at equivalence in dilute aqueous solution near | Explanation |
|---|---|---|
| Strong acid and strong base | Approximately 7 | The remaining ions have negligible acid–base effects |
| Weak acid and strong base | Above 7 | The weak acid’s conjugate base reacts with water to produce hydroxide |
| Strong acid and weak base | Below 7 | The weak base’s conjugate acid transfers protons to water |
| Weak acid and weak base | Depends on relative acid and base strengths | Both product ions can participate in acid–base equilibria |
For example, complete stoichiometric neutralization of acetic acid by sodium hydroxide produces sodium acetate. Acetate undergoes hydrolysis:
The solution is therefore alkaline at equivalence. Conversely, ammonium chloride solutions are acidic because ammonium ions donate protons to water.
Partial neutralization of a weak acid can produce a buffer solution containing appreciable amounts of both the acid and its conjugate base. Such a mixture resists, but does not prevent, pH changes when small amounts of acid or base are added.
Energy changes
Neutralization of a dilute strong acid by a dilute strong base is generally exothermic. Near room temperature, the enthalpy change is approximately per mole of water formed. Its similar value for many strong acid–strong base pairs reflects their common net ionic reaction.
This value is not universal. Neutralization involving weak acids or weak bases includes energy changes associated with their ionization. Concentrated solutions introduce additional effects from dilution, mixing, and changes in solvation. Some acid–base reactions can consequently have substantially different thermal behavior.
The heat released can be studied by calorimetry. Relating a measured temperature change to reaction enthalpy requires accounting for the reacting amount, the heat capacity of the solution and apparatus, and heat exchanged with the surroundings.
Neutralization titration
Neutralization is fundamental to acid–base titration, a method of analytical chemistry used to determine an acid or base concentration. A solution of known concentration is added to a measured quantity of sample, and the volume needed to reach a selected endpoint is recorded.
The endpoint is the experimentally observed signal, whereas the equivalence point is defined by stoichiometry. An endpoint may be detected by:
- A color-changing acid–base indicator.
- A pH electrode and the shape of the titration curve.
- Changes in electrical conductivity or other suitable properties.
An indicator is appropriate when its transition range lies within the steep part of the titration curve near equivalence. Different acid–base systems therefore require different indicators or instrumental approaches. Weak acid–weak base titrations often lack a sharp pH change, making simple colorimetric endpoints less distinct.
Polyprotic acids may have several equivalence points, although these are not always experimentally separable. Absorption of carbon dioxide, interfering substances, and incomplete mixing can also affect results.
Applications and limitations
Neutralization is used in chemical manufacturing to adjust acidity, prepare salts, and control reaction conditions. Wastewater treatment uses acidic or alkaline reagents to bring effluents into specified pH ranges. Treatment may also promote metal precipitation, but neutralization alone does not remove all dissolved salts, organic contaminants, or toxic substances.
Agricultural liming reduces soil acidity through reactions involving carbonate minerals and acidic soil components. The required amount depends on soil buffering and exchange reactions, not simply on the pH of a soil-water mixture.
Carbonates and hydrogen carbonates neutralize acids while releasing carbon dioxide. For calcium carbonate,
Such reactions occur in mineral processing, water treatment, and the weathering of carbonate rocks. Unlike reactions between fully dissolved reagents, their rates can depend strongly on particle size, mixing, and access to the solid surface.
Neutralization does not necessarily make a material harmless. The resulting solution may remain corrosive because one reagent is in excess, contain hazardous dissolved substances, or become hot through heat release. A pH measurement indicates acidity under the measurement conditions; it does not by itself establish composition or the total amount of acid or base the material can consume.