A monopole antenna is an antenna consisting of a conducting element fed against a conducting reference structure, such as a ground plane, a vehicle body, or a counterpoise. Its simplest form is a straight rod or wire perpendicular to a conducting surface. The widely used quarter-wave monopole has a radiating element approximately one-quarter of a wavelength long. Monopoles are common in broadcasting, mobile radio, and wireless devices because they can provide useful coverage with a relatively simple structure.
Operating principle
A monopole is usually connected to an unbalanced feed line: one terminal feeds the radiating element, while the other connects to the ground plane or counterpoise. With a coaxial cable, the inner conductor commonly connects to the element and the outer conductor to the reference structure.
The reference structure is an essential part of the antenna system, not merely a connection to electrical earth. Alternating currents flow on both the element and the reference structure, producing electromagnetic radiation. A metal vehicle roof, for example, can provide the reference structure without being electrically connected to the soil.
The idealized behavior is explained by image theory. A straight monopole perpendicular to an infinite, perfectly conducting plane produces fields above the plane equivalent to those of a dipole antenna formed by the monopole and its mirror image. A quarter-wave monopole therefore corresponds to one half of a half-wave dipole.
This equivalence depends on the ideal conducting boundary. Real ground planes are finite, and soil is neither a perfect conductor nor a simple substitute for a metal sheet. Consequently, practical monopoles can differ substantially from the ideal model.
Length, resonance, and impedance
The free-space wavelength is
where is the speed of light and is frequency. The nominal length of a quarter-wave monopole is therefore
At 100 MHz, this gives approximately 0.75 m. A practical resonant element is usually somewhat shorter because of end effects and its geometry and surroundings. Insulation, element diameter, nearby materials, and the reference structure also affect resonance.
For an ideal monopole over a perfectly conducting infinite plane, its input impedance is half that of the corresponding dipole with the same total current distribution and feed-point current. A thin, exactly quarter-wavelength monopole has an input impedance of approximately
The positive imaginary term represents inductive reactance. Slightly shortening the element can bring it to resonance, where the input reactance is zero; the resistance then remains of the order of 35–37 ohms, depending on geometry.
This is reasonably close to the 50-ohm impedance commonly used in radio equipment, but does not give an exact match. Element dimensions, radial angles, feed arrangements, or an impedance-matching network can alter the impedance presented to the transmitter or receiver.
Resonance, impedance matching, and radiation efficiency are distinct properties. An antenna can be resonant but poorly matched, or well matched while dissipating much of its accepted power as heat.
Radiation pattern and polarization
An ideal vertical quarter-wave monopole has an approximately omnidirectional radiation pattern in azimuth: its radiation intensity is the same in every horizontal direction. In elevation, radiation is strongest along the conducting plane and falls to zero along the vertical axis.
The radiation is vertically polarized relative to the ground plane. “Omnidirectional” therefore describes horizontal coverage, not equal radiation in every direction in space.
Over an infinite, perfectly conducting plane, the quarter-wave monopole has a maximum directivity of approximately 3.28, or 5.15 dBi. This is about 3 dB greater than the directivity of the corresponding half-wave dipole because the ideal plane confines radiation to one hemisphere. The comparison assumes equal total radiated power.
Practical gain is lower when conductor, ground, dielectric, or matching losses are present. Realized gain additionally accounts for impedance mismatch. Finite ground planes, mounting structures, and nearby objects can distort the pattern, fill the axial null, or produce azimuthal asymmetry.
Longer monopoles have different elevation patterns. Increasing length can concentrate radiation at lower elevations over part of the length range, but can also produce additional lobes and nulls; a longer element is not automatically better for every application.
Ground planes and counterpoises
Several structures can provide the monopole’s reference conductor:
- Conducting sheet: a metal panel, chassis, or vehicle body.
- Radial system: wires extending outward from the feed point, either elevated or placed on or beneath the ground.
- Counterpoise: a conducting network that provides a radio-frequency reference without requiring a low-resistance connection to earth.
- Device chassis or circuit-board ground: the return-current structure in many compact wireless products.
In elevated ground-plane antennas, downward-sloping radials can raise the feed-point resistance toward 50 ohms, although the result depends on their dimensions and arrangement.
At medium and low frequencies, broadcast monopoles often operate over lossy soil. Ground systems reduce power dissipation associated with currents returning through the earth. Ground loss adds an effective resistance at the feed point: an apparently convenient input resistance may therefore indicate loss rather than good radiation performance.
In small devices, the chassis can contribute strongly to radiation. Describing only the projecting wire or printed trace as “the antenna” may obscure the behavior of the complete structure.
Main forms
Whip and mast antennas
A whip is a slender, often flexible rod used on vehicles, handheld radios, and portable equipment. Telescopic versions allow their length to be adjusted. A whip may operate as a quarter-wave monopole, an electrically shortened monopole, or a more complex loaded structure.
At lower frequencies, a mast or tower can serve as the radiator. A base-insulated mast is fed between the tower and ground system; other arrangements allow a grounded tower to be excited through a coupling structure.
Electrically short and loaded monopoles
Where a quarter-wave element is too large, the physical radiator can be shortened. A loading coil adds inductive reactance to compensate for the capacitive input reactance of a short element. Top loading, using wires, plates, or a capacitance hat, changes the current distribution and can improve performance relative to an otherwise comparable unloaded short element.
For a thin, electrically short monopole of height , with approximately triangular current distribution over an ideal ground plane, the radiation resistance is approximately
Radiation resistance therefore falls rapidly as height decreases. Conductor, loading-coil, and ground losses can then become large relative to the radiation resistance. Loading can establish resonance, but does not eliminate the efficiency and bandwidth penalties of severe miniaturization.
Folded and planar forms
A folded monopole uses connected conductors to modify input impedance and other characteristics. Its behavior depends on conductor spacing, dimensions, and connections.
Planar monopoles use printed or sheet-metal shapes rather than a thin rod. Rectangular, circular, and tapered forms can support broader operating bandwidths. Some are printed beside a partial circuit-board ground rather than mounted perpendicular to a large metal plane; their operation must be understood from the full geometry.
Inverted-L and inverted-F antennas are related structures used where vertical height is limited. Their horizontal sections, shorting connections, and feed positions alter resonance and impedance, so the simple quarter-wave rod model is only an approximation.
Development and applications
Ground-referenced vertical antennas were central to early wireless telegraphy in the late nineteenth and early twentieth centuries. They became important in long- and medium-wave communication and broadcasting, where a vertical radiator could provide broad horizontal coverage.
Present-day applications include:
- AM broadcasting: vertical towers and mast systems, sometimes arranged in directional arrays.
- Vehicle communications: antennas for broadcast reception, land-mobile radio, and other radio services.
- Portable radios: flexible or telescopic elements working against an equipment chassis and, in practice, influenced by the user.
- Wireless equipment: printed and compact monopole-derived antennas in networking products, Internet of Things devices, and sensors.
- Measurement: rod monopoles used in specified electromagnetic-compatibility test arrangements.
Practical limitations and evaluation
Monopole performance depends strongly on installation. A small ground plane can alter impedance and direct currents onto the outside of the feed cable. Such common-mode currents can make the cable part of the radiating system, changing both the radiation pattern and the measured impedance. A suitable choke or other feed-line treatment can reduce this effect.
Nearby metal, enclosures, wiring, and a user’s body can detune a monopole and introduce absorption or pattern distortion. Compact antennas may therefore need to be characterized in the complete product rather than in isolation.
Bandwidth is also limited. Thicker elements and broadband planar shapes can offer wider impedance bandwidth than slender resonant wires, while heavily shortened and loaded designs commonly have narrower bandwidth. An impedance match alone does not establish adequate radiation efficiency.
Evaluation typically includes input impedance, reflection coefficient or scattering parameters, efficiency, gain, and radiation-pattern measurements. These quantities describe different aspects of performance: low reflected power shows that power enters the antenna system, but does not establish how much of that power is radiated.