Malus’s law describes how the intensity of linearly polarized light changes when it passes through an ideal linear polarizer. The transmitted intensity is proportional to the square of the cosine of the angle between the incident light’s polarization direction and the polarizer’s transmission axis. Named after the French physicist Étienne-Louis Malus, it is a fundamental relation in optics and provides both a classical example of field projection and a quantum example of measurement probabilities.
Mathematical statement
For linearly polarized light incident on an ideal linear polarizer,
where:
- is the intensity immediately before the polarizer;
- is the transmitted intensity;
- is the angle between the incident polarization direction and the polarizer’s transmission axis.
The transmission axis is the direction of the electric-field component that the polarizer transmits. When a polarizer is used to examine an existing polarization state, it is commonly called an analyzer.
The law gives several characteristic cases:
| Relative angle | Transmitted fraction |
|---|---|
Parallel polarization directions give maximum transmission, while perpendicular directions give ideal extinction. The pattern repeats every , because a linear polarization axis has no distinguished forward or backward direction.
Here, intensity means time-averaged optical power per unit area. The same transmission ratio applies to total beam power if the measurement captures the whole transmitted beam and the optical arrangement introduces no additional geometric losses.
Classical explanation
Light is electromagnetic radiation. In a linearly polarized plane wave, the electric field oscillates along a fixed direction perpendicular to propagation.
Let the incident electric-field amplitude be . An ideal linear polarizer transmits its component along the transmission axis:
For incident and transmitted waves in the same medium, intensity is proportional to the squared electric-field amplitude. Consequently,
The square is essential: the field amplitude obeys a cosine relation, but intensity obeys a cosine-squared relation.
The component not transmitted does not disappear in violation of energy conservation. Depending on the device, its energy is absorbed, reflected, or directed into another output beam. Polarizers can operate through selective absorption, reflection, or birefringence, among other mechanisms. Malus’s law specifies transmission into the selected polarization channel, not how every polarizer handles the rejected component.
Unpolarized light and successive polarizers
Malus’s law in its simplest form assumes that the incident light is already linearly polarized. Unpolarized light has no preferred transverse polarization direction. Averaging over those directions gives
An ideal linear polarizer therefore transmits half the intensity of unpolarized incident light. The output is linearly polarized along its transmission axis.
For unpolarized light of initial intensity passing through two ideal polarizers whose axes differ by ,
The factor of one-half belongs to the first polarizer; the cosine-squared factor describes the second.
Three-polarizer arrangement
Two crossed polarizers ideally transmit no light. Inserting a third polarizer between them can produce nonzero transmission because it changes the polarization of the light reaching the final polarizer.
For unpolarized incident light, with the outer axes at and and the middle axis at ,
Transmission is greatest at , when .
Each stage both selects a field component and establishes the polarization direction of its output. It is therefore incorrect to treat successive polarizers as merely removing fixed subsets from an unchanged initial beam.
Quantum interpretation
In quantum mechanics, a linearly polarized photon can be represented by a polarization state . If represents polarization along an ideal analyzer’s transmission axis, the Born rule gives the transmission probability:
For many identically prepared photons, the average transmitted fraction reproduces Malus’s law. An individual photon is not divided into a fraction of a photon: it is transmitted or not transmitted into the selected output, with the stated probability. A transmitted photon has the polarization selected by the analyzer.
The quantum description and the classical field projection yield the same intensity relation. Observing a cosine-squared transmission curve alone therefore does not establish a uniquely quantum property of light.
Other polarization states
A single polarization angle does not fully describe circularly or elliptically polarized light, or a partially polarized beam. These require a more general description.
Using Stokes parameters, the intensity transmitted by an ideal linear analyzer at angle is
where is the total incident intensity and and describe its linear polarization components relative to chosen reference axes. For fully linearly polarized light, this reduces to Malus’s law.
Circularly polarized light transmits half its intensity through an ideal linear analyzer at every analyzer angle. Unpolarized light does the same. Rotation of a linear analyzer alone therefore cannot distinguish these states; additional optical elements are needed to measure circular polarization.
Experimental use and limitations
A typical demonstration uses a light source, a polarizer, a rotating analyzer, and a detector. Plotting transmitted intensity against analyzer angle produces a cosine-squared curve. The relation is used in polarization measurements, optical attenuation, instrument calibration, and the analysis of optical systems.
Real polarizers have finite transmission and imperfect rejection. For linearly polarized incident light, a useful model is
where and are the intensity transmittances for polarization parallel and perpendicular to the principal transmission axis. Ideal behavior corresponds to and . Their ratio, , is the extinction ratio.
Measurements may also be affected by background light, detector offsets, angular misalignment, wavelength-dependent transmission, and changes in the beam’s polarization. Optical elements that introduce phase differences between perpendicular field components can turn linear polarization into elliptical polarization, requiring a more general treatment than the simple law.
Historical background
Malus investigated polarized light after observing sunlight reflected from a window through a crystal of Iceland spar in 1808. His subsequent work established the cosine-squared intensity relation associated with his name.
These investigations helped establish polarization as a distinct optical phenomenon. Its later explanation in terms of transverse electric-field oscillations became an important part of the electromagnetic theory of light.