A lunar eclipse occurs when Earth passes between the Sun and the Moon, causing the Moon to move through some part of Earth’s shadow. It can occur only at full Moon, but not at every full Moon because the lunar orbit is inclined to Earth’s orbital plane. Depending on the alignment, an eclipse may produce a subtle reduction in brightness, a conspicuous dark indentation across the lunar disk, or complete immersion in Earth’s central shadow.
Lunar eclipses are important both as predictable celestial events and as sources of scientific information. Their geometry helped establish Earth’s spherical shape and supported early measurements of the Earth–Moon system. Historical observations constrain changes in Earth’s rotation, while modern measurements investigate the transmission of sunlight through Earth’s atmosphere and the thermal properties of the lunar surface. Unlike a solar eclipse, a lunar eclipse is visible across much of Earth’s nighttime hemisphere, and its appearance is governed not only by orbital geometry but also by atmospheric conditions around Earth’s sunlit edge.
Shadow geometry and the conditions for an eclipse
Earth casts a shadow away from the Sun, but the shadow does not have a single, sharply defined outer boundary. Because the Sun is an extended luminous disk rather than a point source, Earth produces two principal shadow regions. Within the umbra, Earth completely blocks the direct solar disk. Within the surrounding penumbra, Earth blocks only part of it. An observer standing on the Moon would therefore see a partial solar eclipse while inside the penumbra and a total solar eclipse while inside the umbra, although an illuminated atmospheric rim could remain visible around Earth.
The umbra narrows with distance because the Sun is much larger than Earth. Its approximate length is
where and are the radii of Earth and the Sun, and is their separation. Using mean values gives an umbral length of about 1.38 million kilometres, considerably greater than the Moon’s average distance of approximately 384,400 kilometres. Earth’s umbra therefore remains large enough at the lunar orbit to contain the entire Moon.
At the Moon’s mean distance, a simple geometric calculation gives the umbra a radius of roughly 4,600 kilometres, compared with the Moon’s radius of about 1,737 kilometres. The penumbra’s outer radius there is approximately 8,200 kilometres. These dimensions vary as Earth’s distance from the Sun and the Moon’s distance from Earth change. Atmospheric effects also make the observed shadow boundary differ from an ideal geometric construction.
A lunar eclipse requires more than the full-Moon alignment. The Moon’s orbit is inclined by about to the ecliptic, the plane of Earth’s orbit around the Sun. Most full Moons consequently pass north or south of Earth’s shadow. Eclipses occur when full Moon falls sufficiently near an orbital node, one of the two points where the lunar orbital plane intersects the ecliptic.
The resulting alignment is sometimes called syzygy, meaning an approximately straight-line configuration of three celestial bodies. It need not be exact: a grazing encounter with the penumbra is already a lunar eclipse. This distinction explains why eclipses differ so greatly in appearance. A small displacement of the Moon’s trajectory can change an event from barely detectable penumbral shading to a partial eclipse, or from partial obscuration to a long total eclipse.
Eclipse types, phases, and magnitude
Lunar eclipses are classified according to the deepest shadow region reached by the Moon. A penumbral eclipse occurs when the Moon enters the penumbra but never intersects the umbra. A partial lunar eclipse occurs when only part of the lunar disk enters the umbra. A total lunar eclipse occurs when the entire disk passes inside the umbra for at least a short interval. Every total eclipse includes partial and penumbral phases before and after totality.
Penumbral eclipses vary substantially in visibility. If the Moon only grazes the outer penumbra, the reduction in brightness is generally too small to notice without measurements or carefully controlled photographs. A deep penumbral eclipse can produce an obvious gray shading on the side nearest the umbra. A total penumbral eclipse, in which the entire Moon lies within the penumbra without entering the umbra, is geometrically possible but relatively uncommon.
The progression of an eclipse is described by a standard sequence of contacts:
- P1: the Moon first touches the penumbra.
- U1: the Moon first touches the umbra; the partial phase begins.
- U2: the whole lunar disk enters the umbra; totality begins.
- Greatest eclipse: the Moon passes closest to the shadow axis.
- U3: part of the Moon emerges from the umbra; totality ends.
- U4: the Moon completely leaves the umbra.
- P4: the Moon completely leaves the penumbra.
Only the contacts appropriate to a particular eclipse occur. Penumbral eclipses have no umbral contacts, while partial eclipses have U1 and U4 but no U2 or U3. The earliest and latest penumbral contacts are usually not visually perceptible because the decrease in illumination begins and ends gradually.
Eclipse magnitude describes geometric immersion rather than brightness. The umbral magnitude is the fraction of the Moon’s diameter immersed in the umbra at greatest eclipse, measured along the line joining the centers of the Moon and shadow. A value between zero and one indicates a partial eclipse; a value greater than one indicates totality. Penumbral magnitude is defined similarly for the penumbra. Magnitude must not be confused with the fraction of the lunar disk’s area inside the shadow or with astronomical magnitude, the logarithmic measure of apparent brightness.
The duration depends on both the length of the path through the shadow and the Moon’s speed along that path. A nearly central eclipse can have almost 1 hour 47 minutes of totality, whereas a grazing total eclipse may remain total for only a few minutes. The eclipse of 27 July 2018 had about 103 minutes of totality; that of 26 May 2021 had only about 14 minutes. The full sequence from P1 to P4 can extend over approximately six hours.
Orbital cycles and recurrence
The pattern of lunar eclipses reflects several different lunar periods. The synodic month, approximately 29.53059 days, is the interval between successive full Moons. The draconic month, approximately 27.21222 days, measures the Moon’s return to the same orbital node. The anomalistic month, approximately 27.55455 days, measures the interval between successive passages through perigee, the nearest point to Earth. Eclipses require the phase cycle and node cycle to coincide sufficiently closely; similarities in eclipse duration also depend on the distance cycle.
The orbital nodes are not fixed. They regress around the ecliptic in about 18.6 years, mainly because of solar gravitational perturbations. As a result, the Sun returns to the same lunar node in approximately 346.6 days rather than one calendar year. Favorable alignments cluster in eclipse seasons, which recur about 173 days apart and each last roughly a month. An eclipse season may contain both solar and lunar eclipses, with successive events commonly separated by approximately half a synodic month.
A particularly important recurrence is the Saros, approximately 6,585.32 days, or 18 years 11 days and 8 hours, with the calendar-day count depending on intervening leap years. It follows from the near equality
After one Saros, the Moon returns to nearly the same phase, node, and distance from Earth. An eclipse therefore tends to resemble the preceding member of its Saros series in geometry and duration.
The additional eight hours mean that Earth has rotated about one-third of a turn farther when the next eclipse occurs. Consequently, the region of best visibility shifts by roughly in longitude. Three Saros periods form an exeligmos, approximately 54 years and one month, after which the time of day is more nearly repeated. Neither cycle is exact, so corresponding eclipse paths and visibility regions continue to change.
A Saros series evolves over many centuries. Its earliest lunar eclipses are generally weak penumbral events near one side of Earth’s shadow. Later members penetrate more deeply, may become partial and then total, and eventually return through partial to penumbral events near the opposite side. Not every series follows an identical sequence, and individual series overlap in time.
These relationships explain why eclipse dates cannot be predicted by simply adding a whole number of calendar years. The Gregorian calendar is tied to the seasonal year, whereas eclipse recurrence depends on several interacting orbital periods. Long-term calculations also include changes in the lunar orbit caused by gravity, the nonspherical Earth, and tidal evolution. Eclipses therefore exhibit strong recurring patterns without repeating in precisely identical configurations.
Atmospheric illumination and the red Moon
During totality, the Moon is deprived of direct sunlight, but it usually does not disappear. Some sunlight passes through Earth’s atmosphere, bends into the geometrical umbra, and illuminates the lunar surface. The bending results from refraction through air whose refractive index changes with altitude. Seen from the eclipsed Moon, much of the illumination would come from a thin ring around Earth’s limb, combining light transmitted through atmospheric regions experiencing sunrise or sunset.
The reddish color results from wavelength-dependent transmission. Scattering by atmospheric molecules preferentially removes shorter wavelengths from the transmitted beam. In the idealized Rayleigh limit, scattering strength varies approximately as , where is wavelength. Blue and violet light are therefore removed more efficiently than red light along the long, slanting atmospheric paths that contribute to eclipse illumination. Absorption by atmospheric gases and extinction by particles further alter the spectrum.
A total eclipse need not be uniformly red. Copper, orange, brown, and gray regions may coexist across the disk. Near the umbral boundary, some eclipses show a bluish or turquoise fringe, partly associated with the selective absorption of visible light by ozone. The Moon’s position within the umbra matters because different parts of the shadow receive different mixtures of refracted rays. Lunar surface reflectivity also contributes to the visible pattern.
The state of Earth’s atmosphere can strongly affect brightness. Extensive cloud cover and aerosols along the relevant atmospheric limb reduce the transmitted light. Large volcanic eruptions can inject sulfate aerosols into the stratosphere and produce unusually dark eclipses. Eclipses following the 1991 eruption of Mount Pinatubo were affected by the resulting aerosol veil. Brightness is not, however, a simple measure of global volcanic activity: it also depends on eclipse geometry, aerosol location and altitude, clouds, and observing conditions.
A traditional descriptive system is the Danjon scale, devised by the French astronomer André Danjon. It assigns an index from 0 to 4: describes a very dark eclipse in which the Moon is difficult to distinguish, while describes a bright copper-red or orange eclipse with a conspicuous luminous rim. Intermediate values characterize progressively brighter reddish or brownish appearances. The scale is useful for visual comparison but is subjective and does not replace calibrated photometry.
The popular expression “blood moon” generally refers to this red appearance, not to a separate astronomical class. A total eclipse coinciding with lunar perigee may also be described using the informal term “supermoon,” but the underlying shadow mechanism is unchanged.
Visibility and observation from Earth
A lunar eclipse is potentially visible wherever the Moon is above the local horizon during the event. At any particular instant, this corresponds to approximately half of Earth, although the horizon, terrain, weather, and atmospheric transparency restrict practical visibility. As Earth rotates during the several-hour sequence, some places see the Moon rise already eclipsed, while others see it set before the eclipse ends. Consequently, a larger region can witness some portion of an eclipse than can observe its entire progression.
The principal eclipse contacts occur at essentially the same physical times for all terrestrial observers. This distinguishes lunar eclipses from solar eclipses, whose local circumstances vary strongly because the Moon’s shadow moves across Earth’s surface. Local clock times still differ by time zone, and an eclipse listed under one date in a global catalogue may occur on a different civil date at a particular observing site. Detailed observations can also show small topocentric differences in apparent geometry, but the eclipse itself is an event at the Moon.
A striking near-horizon phenomenon is a selenelion, in which the eclipsed Moon and the Sun can both be seen near opposite horizons. This does not contradict the nearly straight Sun–Earth–Moon alignment. Atmospheric refraction raises the apparent positions of objects near the horizon, allowing the Sun and Moon to appear simultaneously above it even when their true geometric positions would not both be visible. The finite angular diameters of the two bodies also affect the circumstances.
Lunar eclipses can be viewed directly without the protective equipment required for observing the Sun. Binoculars and a telescope reveal the advancing shadow and changes in contrast across lunar features, but magnification is unnecessary to recognize a substantial partial or total eclipse. The early penumbral phase is much less conspicuous than the first umbral indentation. During totality, the diminished moonlight can make surrounding stars and the Milky Way more apparent, although this depends on sky brightness and the eclipse’s darkness.
Photography requires accommodation of a very large brightness range. Exposure settings appropriate for the uneclipsed full Moon generally record a totally eclipsed Moon as extremely dark. Longer exposures reveal its color but can blur detail through the Moon’s apparent motion unless tracking is used. Changes in exposure, white balance, processing, or display settings can also make two photographs appear to document different colors or brightnesses when the difference is largely instrumental.
Scientific comparisons therefore require calibration, a specified spectral response, accurate timing, and information about local atmospheric extinction. Visual impressions remain valuable descriptions, but they cannot by themselves establish small differences in the physical brightness of separate eclipses.
Prediction, calculation, and timing
Modern eclipse prediction begins with an ephemeris, a calculated sequence of positions and velocities for the Sun, Earth, and Moon. Numerical models integrate their motions under gravity and include perturbations from other Solar System bodies. The Moon’s position is especially sensitive to solar perturbations, so treating it as a body following a fixed ellipse around Earth is inadequate for precise predictions. Accurate modern lunar ephemerides are also constrained by observations, including lunar laser ranging.
For a simplified geometric description, let be the perpendicular distance between the Moon’s center and the shadow axis at the Moon’s distance, and let , , and denote the lunar, umbral, and penumbral radii. The main conditions are
for some penumbral overlap,
for some umbral overlap, and
for totality. Contact times are found by solving the corresponding boundary equations as the Moon moves relative to the shadow.
Real calculations require additional conventions. Earth is oblate rather than perfectly spherical, and its atmosphere absorbs and refracts sunlight. Observed umbral contacts commonly imply a somewhat larger effective shadow than a simple solid-Earth model predicts. Eclipse catalogues therefore specify or adopt a shadow-enlargement prescription. Small differences between published contact times can result from these prescriptions, ephemerides, or adopted lunar dimensions rather than from computational errors.
Timing also requires a distinction between uniform astronomical time scales and time based on Earth’s rotation. Orbital calculations are expressed using dynamical time arguments, whereas visibility from a geographical location depends on rotational orientation. The quantity Delta T, conventionally written , expresses the difference between Terrestrial Time and Universal Time:
Earth’s rotation is not perfectly uniform because of tidal braking and exchanges of angular momentum among the solid Earth, atmosphere, oceans, and interior. Predictions far into the past or future therefore carry uncertainty in the geographical circumstances of an eclipse, even when its occurrence and broad geometry are secure.
A useful catalogue parameter is gamma, the minimum distance of the Moon’s center from the shadow axis expressed in Earth equatorial radii, with a sign indicating which side of the axis it passes. Together with magnitude, duration, node, and Saros membership, gamma permits compact comparison of events. Visibility maps then combine the calculated contacts with Earth’s orientation, showing where each stage occurs above the horizon and where moonrise or moonset interrupts observation.
Historical records and astronomical understanding
Lunar eclipses were recorded in several ancient astronomical traditions because they were conspicuous, recurrent, and observable across broad regions. Babylonian astronomers developed sophisticated numerical methods for recognizing eclipse possibilities and recurring sequences. Their records contributed to later knowledge of lunar motion. The recurrence now called the Saros rests on relationships between lunar periods that were recognized in ancient Mesopotamian astronomy, although the terminology and mathematical interpretation changed over time.
In ancient Greek natural philosophy, eclipses provided evidence about Earth’s form. Aristotle, writing in the fourth century BCE, noted that Earth’s boundary on the eclipsed Moon is consistently curved. A spherical Earth naturally explains this circular shadow under changing orientations. The argument formed part of a broader case that also used changes in the visible stars with latitude and other observations; lunar eclipses were not the sole foundation of ancient knowledge of Earth’s shape.
Eclipse geometry also supported early attempts to determine celestial distances and sizes. Aristarchus of Samos, in the third century BCE, used geometrical relationships involving the Sun, Earth, and Moon, including lunar-eclipse observations, to investigate their relative dimensions. Such methods were limited by the precision of naked-eye measurements and by the assumptions used to interpret observed durations and angles. Nevertheless, they established that eclipse phenomena could be analyzed quantitatively rather than treated only as portents.
Ptolemy incorporated earlier eclipse records into the Almagest in the second century CE. Observations separated by long intervals helped constrain the mean lunar motion and orbital parameters in his mathematical astronomy. Because an eclipse could be recognized over a wide area, it also provided a common event for comparing local time observations. In principle, the difference between local times for the same event gives a longitude difference, although practical accuracy was limited by clocks, timing methods, and communication.
Historical eclipse reports also intersect with political and religious history, but their interpretation requires attention to textual reliability. A well-known example is the eclipse of 20 September 331 BCE, shortly before the Battle of Gaugamela. Reports of such events can assist chronological reconstruction when the recorded place, date, and circumstances can be matched to astronomical calculations. An eclipse reference by itself does not always identify a unique event, especially if a text is incomplete, symbolic, or copied long after the occurrence.
With the development of telescopic observation and precise clocks, astronomers increasingly recorded the times at which the umbral boundary crossed named lunar craters. These observations contributed to studies of the effective shadow size and provided a more standardized record than general descriptions of a darkened Moon.
Scientific uses and limits of eclipse measurements
Lunar eclipses provide a natural experiment in atmospheric transmission. Sunlight reaching the eclipsed Moon has crossed long, grazing paths through Earth’s atmosphere before being reflected toward the observer. Using spectroscopy, researchers can identify absorption associated with gases such as oxygen, water vapor, and ozone. The measured spectrum is not a simple sample from one altitude or location: it combines illumination from extended regions around Earth’s limb and is further modified by lunar reflectance and the observer’s own atmosphere.
This geometry has made lunar eclipses useful as analogues for studying an exoplanet atmosphere during a transit. In both cases, starlight passes through the limb of a planetary atmosphere. Observations of eclipses allow methods for recognizing atmospheric features to be tested on a planet whose composition is independently known. The analogy is incomplete, however, because a lunar eclipse includes reflection from a solid surface, particular viewing geometries, and spatially uneven illumination that do not directly reproduce an unresolved exoplanet transit.
Eclipses also abruptly change the energy supplied to the lunar surface. Normally, sunlight heats the exposed ground, but entry into the umbra removes most of this input within a short period. Thermal observations track the resulting fall in temperature and its recovery after sunlight returns. The rate of cooling depends on thermal inertia, which combines the effects of thermal conductivity, density, and heat capacity.
Loose lunar regolith generally responds differently from exposed rock or compact material. Infrared measurements during eclipses can therefore identify thermal anomalies and help distinguish surface materials. Interpreting them requires attention to local slope, illumination history, roughness, and the depth over which heat is stored. A relatively warm feature during eclipse is not automatically evidence of an internal heat source; it may simply retain previously absorbed solar heat more effectively than its surroundings.
Ancient and medieval eclipse observations have a different scientific use: they constrain Earth’s past rotation. Comparing a credible report with a calculated eclipse can restrict the value of at that epoch. Lunar eclipses usually provide less sharply localized constraints than total solar eclipses because they are visible across such a broad area, but reports involving carefully described timings, moonrise, or moonset can still be informative. Collections of observations reveal long-term rotational changes as well as departures from a uniform trend.
Eclipse brightness records can also contribute to reconstructions of stratospheric volcanic aerosols. Exceptionally dark eclipses, considered alongside eruption chronologies, ice cores, and other evidence, can help assess the timing and atmospheric reach of major eruptions. Their interpretation remains limited by subjective descriptions, incomplete observations, local weather, and differences in eclipse geometry. Quantitative reconstruction consequently depends on combining eclipse evidence with independent records rather than treating darkness as a unique measure of atmospheric composition.