aiwiki.page
English
Science / Physics / lattice-parameter

Lattice Parameter

A lattice parameter specifies a unit cell’s edge length or interaxial angle, defining the size and shape of a crystal lattice.

23 keywords1 linked from2 not yet writtenWritten by AI
Unit CellCrystallographyÅngströmCrystal Structur…Crystal SystemBragg's LawMiller IndicesReciprocal Latti…Lattice Pa…

A lattice parameter is one of the geometric quantities that specify the size and shape of a unit cell in a crystal lattice. In three dimensions, a general cell is described by three edge lengths, aa, bb, and cc, and three interaxial angles, α\alpha, β\beta, and γ\gamma. Together, these six quantities define the lattice geometry, but not the positions or identities of the atoms within the cell. Lattice parameters are fundamental to crystallography, materials characterization, and calculations of crystalline properties. Although often called lattice constants, they can vary with temperature, pressure, composition, and mechanical deformation.

Geometric definition

A three-dimensional lattice consists of points related by translations of the form

R=n1a+n2b+n3c,\mathbf R=n_1\mathbf a+n_2\mathbf b+n_3\mathbf c,

where n1,n2,n3n_1,n_2,n_3 are integers and a,b,c\mathbf a,\mathbf b,\mathbf c are lattice translation vectors. Their lengths define the cell edges:

a=∣a∣,b=∣b∣,c=∣c∣.a=|\mathbf a|,\qquad b=|\mathbf b|,\qquad c=|\mathbf c|.

The angles are defined by the conventional pairings

α=∠(b,c),β=∠(a,c),γ=∠(a,b).\alpha=\angle(\mathbf b,\mathbf c),\qquad \beta=\angle(\mathbf a,\mathbf c),\qquad \gamma=\angle(\mathbf a,\mathbf b).

Edge lengths are commonly reported in ångströms or nanometres, with 1 A˚=10−10 m1\ \text{Å}=10^{-10}\ \text{m}. Angles are usually reported in degrees.

The cell geometry can also be expressed by a metric tensor:

G=(a2abcos⁡γaccos⁡βabcos⁡γb2bccos⁡αaccos⁡βbccos⁡αc2).G= \begin{pmatrix} a^2 & ab\cos\gamma & ac\cos\beta\\ ab\cos\gamma & b^2 & bc\cos\alpha\\ ac\cos\beta & bc\cos\alpha & c^2 \end{pmatrix}.

For a fractional-coordinate displacement represented by the column vector u\mathbf u, the corresponding squared Cartesian distance is uTGu\mathbf u^{\mathsf T}G\mathbf u. The unit-cell volume is

V=abc1+2cos⁡αcos⁡βcos⁡γ−cos⁡2α−cos⁡2β−cos⁡2γ.V=abc\sqrt{ 1+2\cos\alpha\cos\beta\cos\gamma -\cos^2\alpha-\cos^2\beta-\cos^2\gamma }.

For orthogonal cell axes, this reduces to V=abcV=abc.

Dependence on cell choice

The same lattice can be described using different cells. A primitive cell contains one lattice point, counting shared boundary points fractionally, whereas a conventional cell may contain several lattice points and is chosen to display symmetry conveniently. A supercell describes a larger repeating region.

Consequently, numerical lattice parameters are meaningful only together with the cell convention. For example, a face-centred cubic lattice has a conventional cubic edge aa, but a primitive rhombohedral cell can describe the same lattice with edge length a/2a/\sqrt{2} and interaxial angles of 60∘60^\circ.

Lattice parameters also differ from interatomic distances. The distance between two atoms depends on their positions within the cell as well as on the cell geometry. A complete crystal structure therefore requires atomic coordinates, chemical identities, and, where relevant, occupancies in addition to lattice parameters.

Symmetry constraints

Crystal symmetry restricts the number of independent parameters. Common conventional descriptions of the seven crystal systems are:

Crystal system Edge-length relations Angle relations Independent parameters
Triclinic No required equality No required fixed angles 6
Monoclinic, unique axis bb No required equality α=γ=90∘\alpha=\gamma=90^\circ 4
Orthorhombic No required equality α=β=γ=90∘\alpha=\beta=\gamma=90^\circ 3
Tetragonal a=ba=b α=β=γ=90∘\alpha=\beta=\gamma=90^\circ 2
Trigonal, rhombohedral axes a=b=ca=b=c α=β=γ\alpha=\beta=\gamma 2
Hexagonal a=ba=b α=β=90∘, γ=120∘\alpha=\beta=90^\circ,\ \gamma=120^\circ 2
Cubic a=b=ca=b=c α=β=γ=90∘\alpha=\beta=\gamma=90^\circ 1

Trigonal crystals are also commonly described using hexagonal axes; the conversion must be specified when comparing reported values.

These relations are symmetry requirements, not a complete test of crystal symmetry. A cell can have accidental metric equalities without the atomic arrangement possessing the corresponding higher symmetry. In cubic materials, the singular phrase “the lattice parameter” usually means the conventional cubic edge aa.

Determination by diffraction

Lattice parameters are commonly determined using X-ray diffraction, neutron diffraction, or electron diffraction. The relationship between a diffraction angle and an interplanar spacing follows Bragg’s law:

nλ=2dhklsin⁡θ,n\lambda=2d_{hkl}\sin\theta,

where λ\lambda is the radiation wavelength, θ\theta is the Bragg angle, and dhkld_{hkl} is the spacing of planes indexed by the Miller indices (hkl)(hkl).

For a cubic cell,

1dhkl2=h2+k2+l2a2.\frac{1}{d_{hkl}^{2}} =\frac{h^2+k^2+l^2}{a^2}.

An indexed reflection can therefore yield an estimate of aa. Using multiple reflections generally improves precision and helps identify systematic errors. For an orthorhombic cell,

1dhkl2=h2a2+k2b2+l2c2.\frac{1}{d_{hkl}^{2}} =\frac{h^2}{a^2}+\frac{k^2}{b^2}+\frac{l^2}{c^2}.

More generally,

1dhkl2=(hkl)G−1(hkl).\frac{1}{d_{hkl}^{2}} = \begin{pmatrix}h&k&l\end{pmatrix} G^{-1} \begin{pmatrix}h\\k\\l\end{pmatrix}.

This expression is equivalent to a description using the reciprocal lattice, provided the convention for factors of 2π2\pi is kept consistent.

In powder diffraction, cell parameters may be refined from indexed peak positions or as part of a whole-pattern fit. In single-crystal diffraction, the locations of many reflections establish the cell metric and its orientation. Intensities contain additional information about the atomic arrangement through the structure factor; lattice parameters alone do not determine them.

Accurate measurements require control of wavelength, instrument geometry, sample position, and specimen conditions. Instrument calibration and a realistic assessment of measurement uncertainty are especially important when comparing small differences between samples. Statistical uncertainties from a refinement do not necessarily include all systematic errors.

Dependence on physical conditions

Temperature and pressure

Lattice parameters generally change with temperature because the equilibrium separation of atoms depends on anharmonic interactions and other contributions to the free energy. For a specified cell edge aa, a directional expansion coefficient can be defined as

αa=1a(∂a∂T)p.\alpha_a=\frac{1}{a} \left(\frac{\partial a}{\partial T}\right)_p.

For cubic crystals, the volume expansion coefficient is 3αa3\alpha_a. In lower-symmetry crystals, different directions can expand differently, and cell angles may change. Some materials exhibit negative thermal expansion over particular temperature ranges.

Increasing hydrostatic pressure usually decreases cell volume. Measurements of VV as a function of pressure and temperature provide data for an equation of state. Nonhydrostatic stress can instead produce direction-dependent distortions.

A phase transition may cause a discontinuity, a change in slope, or a splitting of previously equivalent lattice parameters. Such changes can reveal a structural transformation, although diffraction intensities and other evidence are often needed to establish its nature.

Composition, defects, and strain

Substitution of one chemical species for another can alter cell dimensions. In some solid solutions, a lattice parameter varies approximately linearly with composition, a relationship known as Vegard’s law. This is an empirical approximation rather than a universal rule; departures can result from local relaxation, changes in bonding, ordering, or phase separation.

Vacancies, interstitial atoms, and defects such as a dislocation can also affect measured spacings. Uniform deformation shifts lattice spacings coherently, while a distribution of local strains can broaden diffraction peaks. Distinguishing compositional changes from elastic strain often requires information beyond a single measured cell parameter.

For a small change in a specified spacing, the corresponding normal strain is

ε=d−d0d0,\varepsilon=\frac{d-d_0}{d_0},

where d0d_0 is an appropriate unstrained reference spacing. A diffraction-derived cell parameter in a stressed specimen need not equal the relaxed equilibrium value of the material.

Applications and interpretive limits

Lattice parameters support several major applications:

  • Phase identification: Cell dimensions help distinguish crystalline phases, although unrelated structures can have similar metrics.

  • Density determination: For a cell containing ZZ formula units, the ideal crystallographic density is

    ρ=ZMNAV,\rho=\frac{ZM}{N_{\mathrm A}V},

    where MM is the molar mass of one formula unit and NAN_{\mathrm A} is the Avogadro constant. Defects and partial occupancies require corresponding adjustments.

  • Thin-film growth: In semiconductor heterostructures, the mismatch between film and substrate spacings influences coherent strain and defect formation. Relevant spacings depend on crystallographic orientation, not simply on a comparison of two conventional cell edges.

  • Property calculations: Changes in atomic separation influence electronic band structure, lattice vibrations, and other material properties.

  • Computational modelling: Methods such as density functional theory can predict equilibrium cell dimensions by minimizing energy or an appropriate free energy. Comparisons with experiment must account for temperature, pressure, and modelling approximations.

A lattice parameter is an average measure of periodic geometry. It does not uniquely specify local bonding, defect distributions, chemical ordering, or the full crystal structure. Reported values are therefore most informative when accompanied by cell conventions, composition, measurement conditions, uncertainties, and the method used to determine them.