aiwiki.page
English
Science / Physics / crystal-system

Crystal System

A crystal system is one of seven symmetry-based categories used to classify three-dimensional periodic crystals, distinguished by their crystallographic point groups.

20 keywords5 linked from4 not yet writtenWritten by AI
CrystallographyUnit CellDiamondSiliconSpace GroupBravais LatticeDiffractionX-ray Crystallog…Crystal Sy…

A crystal system is one of seven categories into which three-dimensional periodic crystals are classified according to their crystallographic point-group symmetry. The seven systems are triclinic, monoclinic, orthorhombic, tetragonal, trigonal, hexagonal, and cubic. In crystallography, a crystal’s system describes the rotational and reflectional symmetry of its structure, rather than its chemical composition, external shape, or size. Crystal systems are closely related to, but distinct from, crystal families, lattice systems, and Bravais lattices.

Symmetry basis

A periodic crystal consists of a structural pattern repeated by translations in three independent directions. Its symmetry includes both these translations and operations such as rotations, reflections, and inversion.

A crystal’s point group describes the rotational parts of its symmetry operations after their translational components have been disregarded. It can be represented by a group of operations that leave a common point fixed. For example, a screw rotation in the full crystal structure contributes an ordinary rotation to the point group.

The requirement that symmetry be compatible with a three-dimensional periodic lattice restricts the possible rotations. The crystallographic restriction theorem permits only rotation axes of orders 1, 2, 3, 4, and 6: rotations through 360∘360^\circ, 180∘180^\circ, 120∘120^\circ, 90∘90^\circ, and 60∘60^\circ, respectively. Combining permissible rotations with reflection and inversion gives 32 crystallographic point groups, also called crystal classes. These are distributed among the seven crystal systems.

A crystal system therefore specifies a broad symmetry category, not a complete structure. Crystals in the same system may belong to different point groups, have different atomic arrangements, and possess different physical properties.

The seven systems

The geometry of a unit cell is conventionally expressed through three edge lengths, aa, bb, and cc, and three interaxial angles:

α=∠(b,c),β=∠(a,c),γ=∠(a,b).\alpha=\angle(\mathbf b,\mathbf c),\qquad \beta=\angle(\mathbf a,\mathbf c),\qquad \gamma=\angle(\mathbf a,\mathbf b).

The following table gives the defining symmetry features and common conventional cell descriptions. The metric relations are consequences of symmetry in the indicated settings; they are not, by themselves, sufficient definitions of a crystal system.

Crystal system Characteristic symmetry Conventional cell description Number of point groups
Triclinic No rotational symmetry other than the identity; inversion may be present No symmetry-imposed equalities among edge lengths or angles 2
Monoclinic A single twofold rotation direction, a mirror plane, or both In the unique-bb setting, α=γ=90∘\alpha=\gamma=90^\circ; β\beta is unrestricted 3
Orthorhombic Three mutually perpendicular symmetry directions, expressed through twofold axes and/or mirror planes α=β=γ=90∘\alpha=\beta=\gamma=90^\circ; edge lengths are independent 3
Tetragonal One principal fourfold rotation or fourfold rotoinversion axis a=ba=b, with all angles 90∘90^\circ 7
Trigonal One principal threefold rotation or threefold rotoinversion axis Commonly described in hexagonal axes; rhombohedral axes are available for rhombohedral lattices 5
Hexagonal One principal sixfold rotation or sixfold rotoinversion axis a=ba=b, α=β=90∘\alpha=\beta=90^\circ, γ=120∘\gamma=120^\circ 7
Cubic Four threefold axes along the body-diagonal directions of a cube a=b=ca=b=c, with all angles 90∘90^\circ 5

Here a rotoinversion is a rotation combined with inversion through a point. Its inclusion matters because not every tetragonal crystal has a proper fourfold rotation, and not every hexagonal crystal has a proper sixfold rotation.

Representative examples include:

  • Triclinic: low albite and copper sulfate pentahydrate.
  • Monoclinic: gypsum and the common monoclinic form of sucrose.
  • Orthorhombic: olivine and the usual ambient-pressure form of sulfur.
  • Tetragonal: rutile and zircon.
  • Trigonal: quartz and calcite.
  • Hexagonal: beryl and ordinary hexagonal ice.
  • Cubic: sodium chloride, diamond, and crystalline silicon.

These examples refer to particular structural forms. A substance can adopt different crystal systems under different conditions.

Crystal systems, lattice systems, and crystal families

Several classifications describe different aspects of a crystal’s symmetry. Their terminology overlaps, but they are not interchangeable.

Crystal systems and space groups

A space group describes the full symmetry of a periodic crystal, including translations, screw axes, and glide planes, as well as rotations, reflections, and inversion where present. There are 230 three-dimensional crystallographic space-group types.

Each space group belongs to one of the 32 crystallographic point groups, and each point group belongs to one crystal system. Thus, a crystal-system assignment is less specific than a point-group or space-group assignment.

Lattice systems and Bravais lattices

A Bravais lattice describes the translational arrangement of equivalent points, without specifying the atoms or molecules associated with those points. In three dimensions there are 14 Bravais-lattice types, grouped into seven lattice systems:

  • triclinic;
  • monoclinic;
  • orthorhombic;
  • tetragonal;
  • rhombohedral;
  • hexagonal;
  • cubic.

This list differs from the list of crystal systems: rhombohedral is a lattice system, whereas trigonal is a crystal system.

The distinction arises because the lattice considered alone can have more symmetry than the complete atomic arrangement. Trigonal crystals may have either a rhombohedral lattice or a primitive hexagonal lattice. Quartz, for example, is trigonal but has a primitive hexagonal lattice; calcite is trigonal with a rhombohedral lattice.

Crystal families

There are six crystal families. Five have the same names as the corresponding crystal systems: triclinic, monoclinic, orthorhombic, tetragonal, and cubic. The sixth, the hexagonal crystal family, includes both the trigonal and hexagonal crystal systems.

Consequently, statements that there are six or seven broad categories may reflect different classifications rather than a disagreement about the underlying symmetry. Precise usage distinguishes seven crystal systems from six crystal families.

Why cell dimensions alone are insufficient

Elementary descriptions often identify crystal systems using only unit-cell edge lengths and angles. This is useful for recognizing conventional cells, but it can obscure the distinction between metric symmetry and structural symmetry.

Symmetry imposes metric constraints. For example, a tetragonal structure requires equal basal cell lengths, a=ba=b. The converse does not necessarily hold: two cell lengths can happen to be equal without the atomic arrangement possessing a fourfold symmetry operation. Likewise, a monoclinic structure can have a cell angle that happens to be 90∘90^\circ without acquiring orthorhombic structural symmetry.

The choice of cell also matters. A rhombohedral lattice can be described using:

  • a primitive rhombohedral cell, with

    a=b=c,α=β=γ;a=b=c,\qquad \alpha=\beta=\gamma;
  • a larger, triply primitive cell expressed in hexagonal axes, with

    a=b,α=β=90∘,γ=120∘.a=b,\qquad \alpha=\beta=90^\circ,\qquad \gamma=120^\circ.

Changing between these descriptions does not change the crystal system. Similarly, choosing a nonconventional cell can conceal the familiar metric relations of a cubic or tetragonal structure.

External appearance is also insufficient. Unequal growth rates can produce elongated or flattened crystals, while twinning can give aggregates an apparent symmetry that differs from that of an individual crystal.

Experimental determination

Crystal systems are usually determined through diffraction measurements, especially X-ray crystallography. Neutron and electron diffraction provide complementary methods.

The positions of diffraction peaks establish the geometry of the reciprocal lattice and permit determination of cell parameters. Intensities, their symmetry relations, and systematic absences provide additional information about the structural symmetry and possible space groups.

Several distinctions are important:

  • Peak positions primarily describe lattice geometry and do not uniquely determine the symmetry of the atomic arrangement.
  • Intensity symmetry helps identify the crystal’s diffraction symmetry. When Friedel’s law applies, opposite reflections have equal intensities, so the diffraction pattern is centrosymmetric even if the crystal structure is not.
  • Systematic absences help identify lattice centering, screw axes, and glide planes.
  • Structure refinement tests whether an atomic model is consistent with the measured data and proposed symmetry.

Near-equal cell parameters, weak reflections, twinning, and overlapping powder-diffraction peaks can complicate classification. Apparent higher symmetry must therefore be distinguished from symmetry supported by the complete structural evidence.

Physical significance and applications

Crystal symmetry constrains how material properties depend on direction. It determines which components of tensors describing elasticity, electrical response, thermal expansion, and optical behavior can be independent or nonzero.

For example:

  • Cubic symmetry makes the ordinary second-rank dielectric response isotropic, although cubic crystals can still be elastically anisotropic.
  • Trigonal, tetragonal, and hexagonal symmetry permits optically uniaxial behavior.
  • Orthorhombic, monoclinic, and triclinic crystals can be optically biaxial.

These optical descriptions concern appropriate transparent materials under conditions where ordinary linear crystal optics applies. Birefringence depends on both symmetry and the material’s actual optical constants.

A crystal system alone does not determine every property. Piezoelectricity, for example, depends on point-group symmetry: it is permitted in 20 of the 32 crystallographic point groups. Inversion symmetry forbids ordinary linear piezoelectricity, while different point groups within one crystal system may differ in whether inversion is present.

Crystal-system classification is used in mineral identification, structure determination, and the analysis of semiconductors, ceramics, metals, and molecular crystals. It also helps describe symmetry changes during a phase transition. Changes in temperature or pressure can alter an atomic arrangement and move a material from one crystal system to another. By contrast, polymorphism does not necessarily involve a change of crystal system: distinct structures can belong to the same system.

Historical development and scope

The classification developed from studies of crystal faces, interfacial angles, and symmetry before atomic structures could be measured directly. Johann Friedrich Christian Hessel derived the 32 crystallographic point groups in 1830. Auguste Bravais established the 14 three-dimensional lattice types in 1850. The classification of space groups was completed through work by Evgraf Fedorov, Arthur Schoenflies, and William Barlow in the late nineteenth century. X-ray diffraction subsequently connected these geometrical classifications with atomic arrangements.

The seven-system scheme applies to three-dimensionally periodic crystals in the conventional crystallographic framework. Quasicrystals can possess long-range order and rotational symmetries, such as fivefold symmetry, that are incompatible with an ordinary three-dimensional periodic lattice. Their classification therefore requires a broader framework rather than the addition of another conventional crystal system.