An intercooler is a heat exchanger that removes heat from a gas after compression. In industrial machinery, it usually cools gas between successive compression stages, reducing the work required by later stages. In an internal combustion engine, it cools the intake air compressed by a turbocharger or supercharger, increasing the air density available to the cylinders and helping control combustion temperatures. Engine intercoolers are also called charge-air coolers, although that term describes their function rather than their precise position in a compression system.
Terminology and scope
In the strict terminology of multistage compressors, an intercooler is located between compression stages, whereas an aftercooler is located after the final stage. An industrial compressor installation may contain both: intercoolers reduce subsequent compression work, while an aftercooler lowers the temperature of the gas supplied to downstream equipment.
Automotive terminology is less strict. A cooler downstream of a single turbocharger compressor is commonly called an intercooler even though it would be an aftercooler under the industrial definition. Charge-air cooler avoids this ambiguity, but is specific to engine intake systems.
The terms also do not uniquely identify the cooling medium. An intercooler may transfer heat directly to ambient air or to a liquid circuit that subsequently rejects heat elsewhere.
Operating principles
Heating during compression
Compressing a gas generally raises its temperature. For an ideal gas undergoing reversible adiabatic, or isentropic, compression,
where and are absolute inlet and outlet temperatures, and are absolute pressures, and is the ratio of specific heats. A real compressor with the same inlet state and pressure ratio generally produces a higher outlet temperature because of irreversibility.
The intercooler transfers some of this heat to a colder medium. Its gas passages are designed to provide substantial heat-transfer area while limiting resistance to flow.
Density and engine operation
The ideal gas law expresses the approximate relationship between gas density, pressure, and temperature:
where is density and is the specific gas constant. At the same absolute pressure, cooler air is denser and contains more oxygen per unit volume.
For an engine, this can increase the oxygen mass admitted during each intake event. The resulting power depends on fuel delivery, valve timing, exhaust conditions, and engine controls; an intercooler does not independently guarantee a particular power increase.
In spark-ignition engines, reducing intake temperature also lowers the tendency toward knock, an abnormal combustion process involving autoignition of part of the unburned charge. This can permit operating conditions that would otherwise be limited by knock. In a diesel engine, charge cooling supports high air mass flow and influences combustion, fuel consumption, and emissions. These effects depend on the complete engine system rather than intake temperature alone.
Multistage compression
For a given pressure ratio, compressing cooler gas generally requires less specific work. Cooling between stages therefore reduces the total work of a multistage compressor compared with compression through the same overall pressure ratio without intercooling.
Under idealized assumptions—including perfect intercooling back to the initial inlet temperature, equal stage efficiencies, and negligible pressure losses—equal pressure ratios across the stages minimize compression work. Real systems depart from this result because of cooling limits, pressure losses, equipment characteristics, and operating constraints.
Intercooling moves a staged compression process toward isothermal compression. It does not itself make compression isothermal, because heating still occurs within each stage.
Main designs
Air-to-air intercoolers
An air-to-air intercooler transfers heat from compressed charge air to a separate stream of ambient air. Automotive units commonly use finned aluminum cores with separate internal and external flow passages.
They are comparatively simple because they do not require a dedicated coolant pump or liquid circuit. Their performance depends strongly on ambient temperature, vehicle speed, fan operation, ducting, and exposure to hot air from other components.
Common vehicle arrangements include:
- Front-mounted: positioned near the front of the vehicle, with access to outside airflow but potentially longer charge-air pipes.
- Top-mounted: positioned above the engine, often supplied through a hood scoop or dedicated duct.
- Side-mounted: positioned in a side opening where packaging permits.
Mounting location alone does not determine performance. Core design and airflow management can be equally important.
Liquid-cooled intercoolers
A liquid-cooled intercooler transfers charge-air heat to a liquid, commonly a water–glycol mixture. A separate heat exchanger then rejects that heat to ambient air. Such systems are often called air-to-water intercoolers, even when the coolant is not pure water.
A compact charge cooler can be placed close to the intake manifold, shortening pressurized air passages. The liquid circuit also provides thermal capacity that can buffer brief changes in load. Its disadvantages include additional mass, pumps, hoses, controls, and potential leak points.
Some installations use a dedicated low-temperature coolant circuit. Others use shared or more complex cooling arrangements. Ordinary air- or liquid-cooled systems cannot continuously cool the charge below the temperature of their available cooling medium. Cooling below ambient requires another heat sink or an active process such as refrigeration.
Performance and design trade-offs
Intercooler performance is commonly described through outlet temperature, heat rejection, pressure drop, and behavior during changing loads.
A frequently used temperature-based effectiveness measure is
where and are the compressed-gas inlet and outlet temperatures, and is the cooling-medium inlet temperature. This describes how much of the available inlet temperature difference is removed from the hot stream. It is not universally identical to heat-exchanger effectiveness defined using the minimum heat-capacity rate of the two streams.
For approximately constant specific heat and no phase change, heat rejection is
where is gas mass flow rate and is specific heat at constant pressure.
Important trade-offs include:
- Cooling versus pressure loss. Restrictive passages can improve heat transfer while reducing the pressure delivered downstream. Maintaining the same manifold pressure may then require a higher compressor pressure ratio.
- Core size versus packaging. Larger cores can provide more heat-transfer area but occupy space and may obstruct airflow to other heat exchangers.
- Internal volume versus response. Additional pipes and core volume require more compressed gas during pressure changes and can contribute to slower boost response.
- Transient capacity versus sustained cooling. A core or coolant reservoir can absorb heat temporarily, but sustained performance depends on rejecting that heat to the surroundings.
Heat soak occurs when accumulated heat raises the temperature of the core, coolant, or surrounding components, reducing cooling performance. Consequently, one outlet-temperature measurement does not fully characterize an intercooler without accompanying information about airflow, gas flow, ambient conditions, and test duration.
Applications and development
Intercooling developed alongside staged industrial compression and later became important in supercharged and turbocharged engines. Industrial applications include compressed-air plants, process-gas compression, and some gas turbine cycles. In gas turbines, reduced compressor work must be weighed against pressure losses and the consequences for the rest of the thermodynamic cycle.
Engine applications include road vehicles, aircraft piston engines, marine engines, and stationary power-generation equipment. Wider use of turbocharging and higher specific engine outputs increased the importance of charge-air cooling. Compact liquid-cooled systems also allow integration close to, or within, intake manifolds.
In industrial installations, cooling may condense water or other vapors from the gas. Separators and drains are therefore often installed after intercoolers; the heat exchanger alone does not necessarily remove the resulting liquid.
Limitations and failure modes
Leaks in an intercooler core, end tank, hose, or joint can reduce delivered boost and disturb engine air management. External debris can block cooling passages, while internal oil deposits or contamination can impair heat transfer. Repeated pressure and temperature cycling can contribute to fatigue at joints and attachments.
Liquid-cooled units can also suffer internal leakage between the charge-air and coolant circuits. In humid conditions, sufficiently strong charge cooling can produce condensation; accumulated water entering an engine can disrupt combustion and, in severe cases, cause mechanical damage.
An intercooler is distinct from a radiator that cools engine coolant, an oil cooler, or an exhaust-gas recirculation cooler. These components may share airflow paths or coolant infrastructure, but they act on different fluid streams and serve different functions.