aiwiki.page
English
Science / Chemistry / ideal-solution

Ideal Solution

An ideal solution is a mixture whose components have activities equal to their mole fractions relative to pure-component reference states.

25 keywords4 linked from2 not yet writtenWritten by AI
Chemical Potenti…ThermodynamicsTemperaturePressureGas ConstantMole FractionThermodynamic Ac…Activity Coeffic…Ideal Solu…

An ideal solution is a mixture in which the chemical potential of every component follows the ideal mixing expression: its value equals that of the pure component at the same temperature and pressure plus a term proportional to the logarithm of its mole fraction. Equivalently, each component’s activity equals its mole fraction when pure-component reference states are used. This model provides a fundamental reference in thermodynamics for describing mixing, phase equilibrium, and departures from ideal behavior. Although most often introduced for liquid mixtures, the ideal-solution framework also applies to suitable solid solutions.

Thermodynamic definition

For a solution containing components indexed by ii, ideal behavior is expressed as

μi(T,p,x)=μi∗(T,p)+RTln⁡xi,\mu_i(T,p,\mathbf{x}) = \mu_i^{*}(T,p)+RT\ln x_i,

where:

  • μi\mu_i is the chemical potential of component ii in the mixture;
  • μi∗\mu_i^{*} is its chemical potential as a pure substance in the same phase at the same temperature TT and pressure pp;
  • RR is the gas constant;
  • xi=ni/∑jnjx_i=n_i/\sum_j n_j is its mole fraction;
  • nin_i is its amount of substance.

The asterisk denotes a pure-component reference state. If the pure component is not stable in the phase being considered, a consistently defined hypothetical pure-phase reference can be used.

For a real solution, the corresponding expression is

μi=μi∗+RTln⁡ai=μi∗+RTln⁡(xiγi),\mu_i = \mu_i^{*}+RT\ln a_i = \mu_i^{*}+RT\ln(x_i\gamma_i),

where aia_i is the thermodynamic activity and γi\gamma_i is the activity coefficient. With this reference-state convention, an ideal solution satisfies

ai=xi,γi=1a_i=x_i, \qquad \gamma_i=1

for every component throughout the composition range.

The reference-state qualification matters: numerical values of activities and activity coefficients depend on the chosen convention. A coefficient defined using a different standard state, such as an infinite-dilution solute reference, need not equal one even when the same physical mixture is described.

Gibbs energy, entropy, and volume of mixing

Mixing is defined relative to the initially separated pure components at the same temperature and pressure. For an ideal solution, the change in Gibbs free energy is

ΔmixG=RT∑iniln⁡xi=nRT∑ixiln⁡xi,\Delta_{\mathrm{mix}}G = RT\sum_i n_i\ln x_i = nRT\sum_i x_i\ln x_i,

where n=∑inin=\sum_i n_i. Because 0<xi<10<x_i<1 for components present in a genuine mixture, this quantity is negative. Ideal mixing therefore lowers the Gibbs energy relative to the separated pure components.

If the ideal-solution expression holds over the relevant temperature and pressure range, thermodynamic differentiation gives

ΔmixS=−R∑iniln⁡xi,\Delta_{\mathrm{mix}}S = -R\sum_i n_i\ln x_i,
ΔmixH=0,ΔmixV=0.\Delta_{\mathrm{mix}}H=0, \qquad \Delta_{\mathrm{mix}}V=0.

Thus:

  • the entropy of mixing is positive;
  • there is no change in enthalpy on mixing;
  • the final volume equals the sum of the initial pure-component volumes.

The decrease in Gibbs energy is consequently entirely entropic:

ΔmixG=−TΔmixS.\Delta_{\mathrm{mix}}G=-T\Delta_{\mathrm{mix}}S.

Zero enthalpy of mixing means that isothermal, constant-pressure mixing requires no net heat exchange when only pressure–volume work is involved. It does not mean that the molecules exert no forces on one another.

Likewise, zero volume change does not mean that different components have equal molar volumes. Rather, each component’s partial molar volume equals its pure-component molar volume at the same temperature and pressure.

These properties follow from ideal behavior as a thermodynamic model over a range of conditions. An activity coefficient that happens to equal one at a single temperature, pressure, and composition does not by itself establish zero enthalpy or volume of mixing, since those properties depend on derivatives.

Stability against demixing

For a binary ideal solution, the molar Gibbs energy of mixing is

Δmixg=RT[xln⁡x+(1−x)ln⁡(1−x)].\Delta_{\mathrm{mix}}g = RT\left[x\ln x+(1-x)\ln(1-x)\right].

Its composition curvature is

d2Δmixgdx2=RT(1x+11−x)>0.\frac{\mathrm{d}^{2}\Delta_{\mathrm{mix}}g}{\mathrm{d}x^{2}} = RT\left(\frac{1}{x}+\frac{1}{1-x}\right)>0.

This convexity means that an ideal solution is stable against separation into two phases of the same type with different compositions. It does not rule out freezing, vaporization, or other transitions involving competing phases.

Molecular interpretation

An ideal solution is not the liquid equivalent of a collection of noninteracting particles. Liquids remain condensed because substantial intermolecular interactions are present.

A useful molecular picture is that replacing like neighbors with unlike neighbors causes little change in interaction energy or packing. Mixing then mainly increases the number of ways in which the distinguishable components can be arranged. In a simple random-mixing model, counting these arrangements leads to the ideal entropy-of-mixing expression.

Similar molecular size, shape, and intermolecular interactions often favor approximately ideal behavior. For example, benzene–toluene mixtures are commonly treated as approximately ideal under ordinary liquid conditions. Similarity is a practical guide rather than a strict criterion: an ideal solution is defined by its thermodynamic behavior, not by a particular structural resemblance.

Large differences in molecular size, strong association, hydrogen bonding, or changes in local molecular organization often produce measurable deviations. Statistical models of polymer mixtures, for example, generally require a more detailed treatment of configurational entropy than the simple molecular ideal-solution expression.

Raoult’s law and vapor–liquid equilibrium

The liquid ideal-solution model is closely associated with Raoult’s law. For a liquid mixture in equilibrium with a vapor that behaves as an ideal gas, and with negligible liquid pressure corrections,

pi=xipi∗(T),p_i=x_i p_i^{*}(T),

where pip_i is the partial pressure of component ii in the vapor and pi∗p_i^{*} is its pure-liquid saturation vapor pressure.

For a binary mixture,

p=xApA∗+xBpB∗,yi=xipi∗p,p=x_Ap_A^{*}+x_Bp_B^{*}, \qquad y_i=\frac{x_i p_i^{*}}{p},

where yiy_i is the vapor-phase mole fraction. At fixed temperature, the total equilibrium vapor pressure therefore varies linearly with liquid composition. The vapor is enriched in the component with the higher pure-component vapor pressure.

This difference between liquid and vapor composition underlies distillation. Under the ideal-liquid and ideal-vapor approximation, the relative volatility is

αAB=yA/xAyB/xB=pA∗pB∗.\alpha_{AB} = \frac{y_A/x_A}{y_B/x_B} = \frac{p_A^{*}}{p_B^{*}}.

It is independent of composition at a specified temperature, although it generally changes with temperature.

A binary ideal solution with unequal pure-component vapor pressures does not form an ordinary interior azeotrope, a composition at which liquid and vapor compositions coincide. If the pure vapor pressures are equal, the model instead gives equal liquid and vapor compositions at every composition at that temperature.

Raoult’s law in its simple pressure form is not the most general definition of liquid ideality. At elevated pressures, vapor nonideality and liquid pressure corrections must be included through fugacities and appropriate pressure corrections. A liquid can remain ideal in the activity sense even when the simple partial-pressure equation is inaccurate.

Historical development

François-Marie Raoult’s studies of solution vapor pressures in the 1880s helped establish the experimental basis of ideal-solution theory. The broader thermodynamic framework connects these vapor-pressure relations with chemical potentials, mixing functions, and chemical equilibrium.

Ideal solutions versus ideally dilute solutions

An ideal solution and an ideally dilute solution are related but distinct models.

In a fully ideal solution, every component follows the pure-component-reference ideal expression across the composition range. Neither component must be designated the solvent.

In an ideally dilute solution:

  • the solvent approaches Raoult’s-law behavior as its mole fraction approaches one;
  • a dilute solute approaches Henry’s-law behavior, with its vapor pressure proportional to its mole fraction through a solute-specific limiting constant.

The Henry’s-law constant generally differs from the pure solute’s saturation vapor pressure. Thus, a dilute solution need not be an ideal solution under the pure-component reference convention.

Dilution alone also does not make all interactions negligible. In electrolyte solutions, long-range interactions between ions can produce appreciable nonideality even at relatively low concentrations. Their limiting activity behavior requires treatment distinct from that of ordinary neutral molecular mixtures.

Departures from ideality

A real solution’s departure from the ideal reference can be described by its excess Gibbs energy:

GE=G−Gid=RT∑iniln⁡γi,G^{E} = G-G^{\mathrm{id}} = RT\sum_i n_i\ln\gamma_i,

with both systems compared at the same temperature, pressure, composition, and reference-state convention.

For an ideal solution, GE=0G^{E}=0. Its associated excess entropy, enthalpy, and volume also vanish when ideality holds over the relevant range of conditions.

Under conditions where vapor-pressure comparisons are appropriate:

  • Positive deviations from Raoult’s law correspond to component activities, and hence partial vapor pressures, above the ideal prediction.
  • Negative deviations correspond to activities and partial vapor pressures below that prediction.

Stronger unlike-component attraction is a common molecular explanation for negative deviations, while unfavorable unlike contacts often help explain positive deviations. These interpretations are not universal rules: packing and entropy changes also contribute.

Sufficient nonideality can produce azeotropes or liquid–liquid separation, depending on the form and magnitude of the excess Gibbs energy. A regular solution is a related model that retains ideal configurational entropy while allowing a nonzero enthalpy of mixing. It therefore differs from an ideal solution even though it shares part of the same mathematical structure.

Uses and assessment

The ideal-solution model serves as:

  • a reference for measuring and modeling activity coefficients;
  • a simple approximation for vapor–liquid equilibrium and separation calculations;
  • a basis for deriving dilute-solution properties, including osmotic pressure, freezing-point depression, and boiling-point elevation;
  • a model for suitable solid solutions and mixtures of chemically similar substances;
  • a starting point for statistical and computational theories of mixing.

Its accuracy depends on the property and conditions of interest. A mixture may show a small heat of mixing while still having significant activity-coefficient deviations, because nonideal entropy can contribute to its excess Gibbs energy. Conversely, nearly ideal vapor pressures at one temperature do not establish ideal behavior at other temperatures or pressures.

Experimental assessment can combine vapor–liquid equilibrium measurements, calorimetry, and density or volume measurements. These test different aspects of the model: agreement with one ideal prediction alone does not establish complete thermodynamic ideality.