The Hubble parameter, usually written , measures the fractional rate at which distances between widely separated, freely moving observers increase as the universe expands. It is defined by , where is the cosmic scale factor and the dot denotes differentiation with respect to cosmic time. Its present value, , is called the Hubble constant. The distinction is important: “constant” refers to its value at the present epoch, not to a quantity that must remain unchanged throughout cosmic history.
The Hubble parameter is central to cosmology because it connects observations of astronomical distances and redshift with the evolution of matter, radiation, and the geometry of the universe. In general relativity, its behavior follows from the gravitational field equations and the universe’s contents. Measurements of also provide a major consistency test: estimates based on nearby astronomical objects and those inferred from the early universe do not all agree within their quoted uncertainties, a discrepancy known as the Hubble tension.
Definition, physical meaning, and units
In a homogeneous and isotropic cosmological model, expansion is described by the scale factor . Its normalization is arbitrary; the usual convention sets its present value to . For two observers participating in the average cosmic expansion, their proper separation at the same cosmic time can be written
where is their fixed comoving separation. Differentiating gives
Thus is a fractional expansion rate, not an ordinary speed. The statement that is about means that the expansion contribution to recession speed increases by about for each additional megaparsec of present proper separation. A megaparsec is one million parsecs, approximately metres. The conventional units make the astronomical interpretation convenient, but the underlying dimension is simply inverse time.
In the International System of Units, this illustrative value corresponds to
Its reciprocal, the Hubble time, is approximately billion years. This is a characteristic expansion timescale rather than automatically the age of the universe. Equating the two would amount to assuming a particular expansion history. Likewise, , approximately gigaparsecs for this value, defines the present Hubble distance, where is the speed of light. It is not generally the radius of the observable universe.
Cosmological results frequently use the dimensionless quantity
A reported length of , for example, equals about if . This notation preserves an explicit dependence on the assumed expansion rate. It is distinct from the similarly written dimensionless expansion function .
The definition applies to the large-scale average expansion. It does not imply that every physical length grows in proportion to . Atoms, planetary systems, galaxies, and many galaxy groups are bound systems whose internal dynamics do not follow the uniform Hubble flow. Even on larger scales, gravitationally induced peculiar velocities are superimposed on expansion. The motion of an individual galaxy therefore need not equal , especially in its immediate cosmic neighborhood.
Relativistic foundations and the expansion equations
The standard mathematical setting is the Friedmann–Lemaître–Robertson–Walker metric, which describes a universe whose spatial geometry is homogeneous and isotropic. These symmetries do not require expansion, but they restrict any uniform change in spatial size to a single scale factor. Cosmic time is the proper time measured by observers at rest with respect to this average matter distribution. In this setting, the Hubble parameter is one-third of the expansion scalar of the comoving observer congruence, giving it a geometrical meaning independent of its astronomical measurement.
Substituting this metric into the Einstein field equations gives the Friedmann equations. One useful convention writes the first as
where is the gravitational constant, is the mass-equivalent density of matter and radiation, is the cosmological constant, and denotes positive, zero, or negative spatial curvature. With dimensionless , supplies the curvature length scale for nonflat models. The cosmological constant is displayed separately and is therefore not included in in this expression.
The corresponding acceleration equation is
It shows that pressure, as well as density, contributes to cosmic gravitational dynamics. Ordinary matter and radiation slow the expansion through their positive density and pressure. A positive cosmological constant contributes acceleration. More generally, a sufficiently negative-pressure component can accelerate expansion without being exactly a cosmological constant.
Energy conservation for a separately conserved cosmic component takes the form
If its equation of state is , with constant , this gives . Nonrelativistic matter has approximately , radiation has , and a cosmological constant has . These different dilution rates explain why the dominant contribution to expansion changes over time.
The critical density is defined by
Density parameters compare each component with this value. When all energy components, including vacuum energy, are counted, their sum equals one in a spatially flat model. For , the present critical density is approximately . It is a gravitationally significant reference density, not a measure of the density inside galaxies.
Evolution through cosmic history
The Hubble parameter changes as the universe’s constituents dilute at different rates. With , cosmological redshift satisfies . A widely used expansion law is
Here the subscripts denote present radiation, matter, curvature, and cosmological-constant contributions. The matter term includes ordinary matter and dark matter. This expression assumes the usual conservation laws and a cosmological constant rather than evolving dark energy. Massive neutrinos require more detailed treatment when passing from relativistic to nonrelativistic behavior.
During an idealized radiation-dominated epoch, , so . During an idealized matter-dominated epoch, , giving . Both are expanding universes in which decreases. These relations are approximations appropriate when one component dominates; transitions between epochs must be calculated from their combined contributions. In the standard cosmological model, matter–radiation equality occurred at a redshift of roughly , well before the release of the cosmic microwave background.
In a universe dominated by a positive cosmological constant, the scale factor approaches exponential growth:
The expansion rate then approaches a constant. This illustrates an important distinction: accelerated expansion does not necessarily mean that is increasing. Since
the scale factor can accelerate while its fractional growth rate falls. This occurs during the recent accelerating phase of the Lambda–Cold Dark Matter model, in which matter remains present while vacuum energy becomes dominant.
The deceleration parameter makes the distinction explicit:
Negative denotes acceleration. For pressureless matter plus a cosmological constant, , neglecting radiation. With representative present fractions of and , the transition from deceleration to acceleration occurs near redshift . Its precise value depends on the adopted model and parameters.
The early expansion rate also governs physical processes rather than merely distances. During primordial nucleosynthesis, nuclear and weak-interaction rates competed with expansion, affecting the resulting light-element abundances. Around recombination, the relation between atomic processes and influenced when radiation ceased scattering efficiently. Such connections allow observations of relic abundances and radiation to constrain the expansion history at epochs inaccessible to direct distance measurements.
Redshift, recession, and astronomical distances
The observational connection between expansion and redshift is expressed by the Hubble–Lemaître law. For sufficiently nearby objects, after accounting for peculiar motion,
This is a low-redshift approximation. Cosmological redshift more generally obeys
where is the emission time. The wavelength of freely propagating radiation grows with the scale factor. Although this can be analyzed through a succession of local Doppler shifts, treating every distant galaxy’s redshift as a single special-relativistic velocity can be misleading.
The distance–redshift relation depends on the entire expansion history between emission and observation. In a spatially flat model, the radial comoving distance is
Astronomical observations often determine other distances. Luminosity distance, , relates an object’s luminosity to its observed flux; angular-diameter distance, , relates its transverse physical size to its observed angle. In a flat model,
Spatial curvature modifies the transverse distance relation, but the standard distance-duality relation remains
provided light follows null geodesics and photon number is conserved. Absorption and observational selection must therefore be distinguished from actual changes in cosmic geometry.
These distinctions become essential at high redshift. The distance inferred from brightness is not the same as the separation at emission, the present proper distance, or the light-travel time multiplied by . Consequently, a graph of observed redshift against an unspecified “distance” is insufficient to define an expansion history. Precision cosmology specifies the distance measure and calculates its dependence on , curvature, and other assumptions.
The Hubble distance also requires care. A comoving object farther away than this distance has an instantaneous recession rate in the chosen cosmic-time slicing. This does not violate special relativity, because the rate concerns changing separation between distant events, not a locally measured object overtaking a light beam. Nor does the Hubble distance generally define a permanent causal boundary. Particle horizons depend on integrals over past expansion, while event horizons depend on the future. Light emitted beyond a Hubble sphere can, in some expansion histories, later reach an observer.
At low redshift the chief complication is often more mundane: peculiar velocities of several hundred kilometres per second can rival the expansion signal. Reference-frame corrections, large-scale flow models, and suitable sample distances are therefore important when estimating from nearby galaxies.
Historical development
The theoretical origins of the Hubble parameter predate the establishment of an accurate extragalactic distance scale. In 1917, Albert Einstein constructed a static relativistic cosmological model using a cosmological constant. Willem de Sitter developed another relativistic solution in the same year. Alexander Friedmann’s papers of 1922 and 1924 demonstrated that Einstein’s equations admitted time-dependent cosmological solutions. These developments established expansion as a possible property of spacetime, rather than simply a collection of galaxies moving through an otherwise fixed background.
In 1927, Georges Lemaître connected a relativistic expanding model with astronomical observations and derived a proportional relation between recession and distance. Using the data available to him, he obtained estimates of approximately and under different treatments of the sample. The paper appeared in French and initially received limited attention. Its importance lies in combining a dynamical cosmological interpretation with an observational estimate of the expansion coefficient.
The observational foundation depended on several distinct advances. Vesto Slipher had measured large radial velocities for many spiral nebulae beginning in the 1910s. Edwin Hubble’s identification of Cepheid variables in the Andromeda nebula and other systems during the 1920s helped establish that these objects lay outside the Milky Way. In 1929, Hubble published a distance–velocity relation for galaxies, obtaining a coefficient of roughly . Hubble and Milton Humason subsequently extended the measurements to more distant systems.
Those early values were much too high, principally because the distance scale was too short. Walter Baade’s distinction between stellar populations and Cepheid classes led to a major revision announced in 1952, approximately doubling the extragalactic distance scale then in use. Later work corrected additional problems, including the identification of unresolved stellar associations or ionized gas regions as individual bright stars. Because is inversely proportional to inferred distance at a fixed recession rate, increasing the distance scale reduced the estimated expansion rate.
For much of the later twentieth century, prominent estimates clustered around values near or . The disagreement reflected difficult astronomical calibration and selection problems rather than a change in the physical definition. The Hubble Space Telescope Key Project reported in 2001, combining statistical and systematic uncertainty. Subsequent improvements shifted the central challenge from establishing the approximate rate to understanding differences at the percent level. In 2018, the International Astronomical Union recommended the name “Hubble–Lemaître law” to recognize Lemaître’s contribution alongside Hubble’s.
Measuring the present rate with the distance ladder
The cosmic distance ladder measures by linking nearby objects with geometrically determined distances to brighter objects visible far into the Hubble flow. No single stellar indicator spans the entire range with equal reliability. The ladder therefore transfers an absolute calibration through overlapping samples. Its strength is its direct connection to the late-time universe; its difficulty is that calibration errors can propagate through several stages.
Geometric anchors include stellar parallaxes, distances to detached eclipsing binaries, and water-maser orbital measurements. Parallax provides distances from apparent stellar position changes as Earth orbits the Sun. Eclipsing binary systems combine orbital and stellar information to establish distances in nearby galaxies. In NGC 4258, observations of orbiting water masers supply a geometric distance by relating angular structure, velocities, and accelerations in a disk around a central black hole. Multiple anchor types allow checks that do not depend on exactly the same measurement physics.
Cepheid variables provide a major intermediate rung. Their pulsation periods correlate with luminosity, following the relation discovered by Henrietta Swan Leavitt in 1908–1912. A modern calibration must also account for chemical composition, extinction by dust, and the observing passband. Cepheids in galaxies that have hosted a Type Ia supernova calibrate the supernova’s absolute luminosity. Type Ia supernovae are not perfectly identical, but empirical corrections using light-curve shape, color, and host properties substantially reduce their luminosity scatter.
The calibrated supernovae then set the distance scale for a much larger sample in the Hubble flow. Their observed brightnesses and redshifts determine the present expansion rate, with corrections for peculiar velocities and the modest cosmological curvature of the low-redshift distance relation. A 2022 SH0ES analysis reported
This is a result from a specified calibration and analysis, not a definition of the constant or a value shared by every late-universe technique.
Alternative ladders use the tip of the red-giant branch, a feature associated with the onset of helium burning in low-mass stars. Its measurement can target low-density galactic regions, reducing some crowding and dust problems, but it requires its own population corrections and absolute calibration. Other stellar indicators provide additional cross-checks.
Important systematic effects include unresolved blending, photometric zero points, parallax offsets, metallicity dependence, extinction laws, and differences between calibration and Hubble-flow samples. Correlated errors matter: two analyses using many of the same anchors or supernovae are not fully independent even if they use different fitting procedures. Precision results therefore require an uncertainty budget that follows calibration dependencies through the whole ladder.
Early-universe inference and acoustic rulers
The cosmic microwave background provides a fundamentally different route to . Its pattern records oscillations in the primordial photon–baryon plasma before radiation decoupled from matter. The Planck satellite measured the angular distribution of these fluctuations with high precision. Within the spatially flat, six-parameter Lambda–Cold Dark Matter model, the Planck 2018 analysis inferred
This is not a direct measurement of the present separation rates of nearby galaxies. It is a model-dependent inference connecting early-universe observations to subsequent expansion.
A central observable is the angular acoustic scale,
where is the comoving sound horizon at last scattering and is the transverse comoving distance to that epoch. The sound horizon is the distance an acoustic disturbance could travel through the early plasma:
with the plasma sound speed. Last scattering occurred near redshift , when the universe was approximately years old. Peak heights, polarization, damping, and gravitational lensing supply additional information beyond the acoustic angle.
The inference depends on physical assumptions. Changing the number or properties of relativistic species, the recombination history, spatial curvature, or dark-energy behavior can alter the relation between the observed pattern and . These freedoms are constrained by other features of the microwave background and by independent observations. The quoted small uncertainty applies within the stated model; it does not encompass every possible modification of cosmology.
Baryon acoustic oscillations preserve a related early-universe scale in the late-time distribution of galaxies and intergalactic gas. They appear as a statistical preference for pairs separated by a characteristic comoving distance, approximately megaparsecs. Transverse measurements constrain , while radial measurements constrain . Here is the sound horizon at the baryon drag epoch, when baryons ceased to be effectively dragged by photons; it is close to, but distinct from, the sound horizon at last scattering.
Combining these measurements with relative distances from supernovae produces an inverse distance ladder. The supernovae map the shape of the late-time distance relation, and the acoustic scale establishes its absolute size. If is calibrated with early-universe physics, the resulting inherits those assumptions. This separation between observed dimensionless distance ratios and an assumed absolute ruler is crucial when assessing whether different expansion measurements genuinely disagree.
Independent probes, cosmic clocks, and physical timescales
Several techniques constrain expansion without using the complete Cepheid–supernova ladder. Strong gravitational lensing can produce multiple images of a variable background source, such as a quasar. Because the light rays traverse different paths and gravitational potentials, changes in brightness arrive at different times. The measured delays constrain a time-delay distance,
where the quantities on the right are angular-diameter distances to the lens, to the source, and between them. At fixed dimensionless cosmological parameters, this distance scales as . Extracting it requires a model of the lens mass, often supplemented by stellar motions and information about other mass along the line of sight. Degeneracies in the mass model are therefore central to the uncertainty.
Standard sirens use gravitational waves from compact-binary mergers. General relativity predicts the relation between the waveform and the binary’s luminosity distance, allowing distance estimation without an electromagnetic luminosity calibration. A redshift must still be obtained from a host galaxy or inferred statistically. The binary neutron-star event GW170817, observed in 2017 with an electromagnetic counterpart, yielded an initial estimate of about . Its uncertainty was much larger than that of precision ladder or microwave-background results, but the measurement established a distinct route. Source inclination, detector calibration, peculiar velocity, and host identification affect the precision.
Galaxy ages provide another approach. The cosmic chronometer method uses differential ages of carefully selected, passively evolving galaxies and the identity
It attempts to determine how much cosmic time passes across a small redshift interval rather than assigning an absolute distance. Stellar population synthesis, chemical composition, and the selection of genuinely comparable galaxy populations introduce important systematic uncertainties.
Expansion can also be tested through redshift drift: the extremely small change in a distant source’s redshift as observations are repeated over time. In an ideal homogeneous model,
This observable would measure cosmic evolution directly rather than reconstructing it solely from objects at different distances. Its small size demands exceptionally stable, long-baseline spectroscopy.
Once is specified, the cosmic age follows from
The standard model gives an age near billion years, not simply . At earlier epochs, comparing reaction rates with determines when processes fall out of equilibrium. Thus the same parameter that sets astronomical distance relations also governs thermal freeze-out and the survival of relic particle populations.
The Hubble tension and tests of cosmological consistency
The Hubble tension is the disagreement between some high-precision estimates of , most notably the Cepheid-calibrated supernova ladder and inference from the microwave background within the standard cosmological model. Comparing the representative SH0ES 2022 value with the Planck 2018 baseline value gives a difference of approximately , or about eight percent relative to the Planck estimate. Dividing by the quadrature sum of their quoted errors gives a discrepancy close to five standard deviations.
That statistical description is conditional. It assumes that the quoted uncertainties adequately describe both analyses and that their comparison is appropriate. A discrepancy expressed in standard deviations is not itself the probability that a particular cosmological theory is false. Nor do all measurements fall into two sharply separated groups: different stellar calibrations, lens analyses, and combinations of acoustic-ruler data yield differing central values and uncertainties. Identifying shared data and common modeling assumptions is essential when combining results.
One class of explanation concerns unrecognized measurement or analysis errors. On the distance-ladder side, investigations examine crowding, dust, metallicity, photometric calibration, selection effects, and the transfer of stellar calibrations between environments. On the early-universe side, relevant questions include foreground removal, instrumental calibration, and assumptions entering the cosmological fit. Agreement between multiple instruments or methods can restrict specific explanations without automatically validating every step in the full inference.
Another class modifies early-universe physics. Because acoustic observations tightly constrain an angle or distance relative to a standard ruler, reducing the inferred sound horizon can permit a larger inferred . Proposed mechanisms include additional early energy density or a temporary early-dark-energy component. Such changes also affect microwave-background peak structure, photon diffusion, primordial element abundances, and the subsequent growth of cosmic structure. A model must fit these observations jointly; shifting alone does not establish an adequate explanation.
Late-time proposals alter dark-energy evolution, gravitational dynamics, or the relationship between the local environment and the cosmic mean. They face constraints from supernova distance ratios, baryon acoustic oscillations, gravitational lensing, and structure growth. Large local departures from the mean expansion are also restricted by observations of density and velocity fields.
The disagreement concerns more than a single numerical constant because is connected to physical densities, cosmic ages, and standard-ruler sizes. Analyses that allow additional parameters often broaden its inferred uncertainty as well as shifting its central value. Decisive tests therefore depend on independent absolute calibrations, improved gravitational-wave and lensing measurements, better control of stellar-distance systematics, and expansion measurements across multiple redshifts, each retaining an explicit account of its observational and theoretical dependencies.