Frequency-division multiplexing (FDM) is a method of multiplexing in which several signals share a communication medium simultaneously by occupying different frequency bands. Each signal is placed in an assigned part of the available spectrum, and a receiver separates the signals using frequency-selective filtering. FDM is used in radio communication, cable television, telephone transmission, satellite links, and broadband access networks. It can carry analog or digital information; its defining feature is separation by frequency, not the form of the information being transmitted.
Operating principle
A physical communication channel, such as a cable or radio link, can carry signals across a range of frequencies. FDM divides this usable range into narrower frequency channels. Each channel carries an independent signal, and their combined waveform travels through the shared medium.
A typical transmitter performs three operations:
- Frequency translation: Each input signal modulates a carrier, placing its spectrum in the assigned frequency band.
- Band limitation: Filters constrain the transmitted spectrum to reduce interference with neighboring channels.
- Combination: The frequency-separated signals are added to form a composite signal.
The receiver reverses the process. A band-pass filter selects the desired frequency band, and a demodulator recovers the original information. A receiver may select just one channel, as in a broadcast radio, or separate many channels simultaneously.
Modulation and multiplexing are different operations. Modulation determines how information changes a carrier; multiplexing determines how multiple signals share a medium. An FDM system can use amplitude, frequency, phase, or digital modulation within its individual channels. In particular, frequency modulation (FM) is not the same as FDM: one describes an encoding method, while the other describes a sharing method.
Mathematical representation
For an illustrative system using amplitude modulation with suppressed carriers, the composite transmitted signal can be written as
where is the message waveform for channel , is its carrier frequency, and is its carrier phase.
If is a real low-pass signal whose spectrum extends to , this modulation produces an ideal passband spectrum extending from to . Its occupied bandwidth is therefore . Other modulation methods have different bandwidth requirements: single-sideband modulation, for example, transmits only one sideband and ideally requires approximately .
The carrier spacing must therefore be chosen according to each channel’s occupied spectrum, rather than merely the bandwidth of its original message.
Channel spacing and guard bands
Conventional FDM assigns channels nominally non-overlapping frequency bands. Practical filters cannot change instantaneously from passing a frequency to rejecting it, and real transmitters do not confine all their energy within perfectly sharp boundaries. Systems therefore commonly reserve unused intervals called guard bands between channels.
For channels with allocated bandwidths , separated by guard intervals , the required frequency span is approximately
Additional margins may be needed at the edges of the complete allocation.
For example, four channels allocated 20 kHz each, with three 5 kHz guard intervals, occupy a total span of 95 kHz. The guard intervals carry no payload, but make channel separation easier.
This creates a trade-off between spectral efficiency and implementation requirements. Narrower spacing can accommodate more channels, but generally demands better filtering, more accurate frequency control, or more advanced signal processing.
Historical development
FDM became important in carrier telephony, where several telephone conversations were transmitted over one physical connection rather than each requiring a separate long-distance circuit. Voice signals were shifted into different frequency bands and combined for transmission over wire pairs, coaxial cables, and later microwave links.
Analog telephone systems commonly used single-sideband modulation to reduce the bandwidth required per conversation. In widely used carrier hierarchies, twelve voice channels, each assigned a 4 kHz slot, formed a basic group occupying 60–108 kHz. Groups could then be translated and combined into larger frequency assemblies.
Radio broadcasting also established a familiar application of frequency separation: stations transmit on different allocated channels, and a receiver selects one by tuning. More precisely, independently operated stations sharing spectrum constitute a multiple-access arrangement, although the underlying frequency-separation principle is the same.
Digital transmission displaced much analog FDM in telephone backbone networks, especially through time-based multiplexing and optical transport. Frequency separation nevertheless remains central to radio, cable, satellite, and optical communications.
Related techniques and distinctions
Time-division multiplexing
Time-division multiplexing (TDM) separates signals by assigning them different time intervals, rather than different frequency bands. In a basic comparison, FDM channels operate simultaneously in separate bands, whereas TDM channels take turns using the same transmission resource.
Neither method is inherently restricted to analog or digital information, although conventional FDM has strong historical associations with analog carrier systems and TDM with digital telephony. Practical networks often combine time and frequency allocation.
Frequency-division multiple access
Frequency-division multiple access (FDMA) applies frequency separation to access by multiple users or terminals. The distinction concerns system organization:
- FDM describes combining or carrying multiple signals in separate frequency bands.
- FDMA describes allocating separate frequency resources to different users sharing a communication system.
A satellite network, for example, may assign different carrier frequencies to separate ground terminals. Their combined signals form a frequency-multiplexed transmission.
Frequency-division duplexing
Frequency-division duplexing (FDD) assigns different frequency bands to the two directions of a bidirectional link. It enables simultaneous transmission and reception without requiring both directions to occupy the same frequencies.
FDD is therefore not synonymous with FDM: it separates communication directions, whereas FDM separates constituent signals. An FDD system can also multiplex many channels within each directional band.
Orthogonal frequency-division multiplexing
Orthogonal frequency-division multiplexing (OFDM) is a multicarrier technique in which closely spaced subcarriers are mathematically orthogonal over the receiver’s observation interval. Unlike conventional filter-separated FDM, their spectra can overlap while remaining separable under the required timing and frequency conditions.
In basic OFDM, the subcarrier spacing is
where is the useful symbol duration, excluding any cyclic prefix. Implementations commonly generate and recover the subcarriers using the fast Fourier transform and its inverse.
OFDM achieves dense frequency packing but requires careful synchronization. Frequency offsets and channel variation can disrupt orthogonality and produce interference between subcarriers.
Wavelength-division multiplexing
Wavelength-division multiplexing (WDM) carries several optical channels at different wavelengths through the same fiber. Because optical frequency and wavelength are related, WDM is the optical counterpart of frequency-based multiplexing. Optical engineering conventionally describes these channels by wavelength rather than by radio-frequency carrier values.
Applications
Cable television and broadband access. A coaxial cable can carry many separately allocated radio-frequency channels. Television services and data services occupy different portions of the cable spectrum. Modern cable systems may use both conventional channel allocations and OFDM within broader allocations.
Digital subscriber lines. Many DSL systems divide the usable spectrum of a telephone pair into numerous narrowband subchannels using discrete multitone modulation, a closely related form of multicarrier transmission. Some configurations also separate upstream and downstream traffic by frequency.
Satellite communications. Multiple carriers can share a satellite transponder’s bandwidth. Channel bandwidths and carrier powers must be coordinated because the transponder’s shared electronics impose both bandwidth and power limits.
Radio systems. Broadcasting, two-way radio, and wireless access systems assign frequency channels to services or users. Depending on the network, frequency separation may be combined with time scheduling, spatial separation, or other access techniques.
Optical networks. WDM allows many optical carriers to share a fiber, increasing aggregate transmission capacity without requiring a separate fiber for every channel.
Advantages and limitations
FDM supports continuous, simultaneous transmission on its component channels. Channels can carry different signal types and data rates, and receivers can select an individual channel without decoding the entire composite transmission. Conventional independently modulated FDM channels do not inherently need a common symbol clock, although each receiver still needs whatever synchronization its modulation requires.
Its principal limitations include:
- Guard-band overhead: Reserved frequency intervals reduce the fraction of spectrum available for information.
- Adjacent-channel interference: Imperfect filtering, frequency drift, and unwanted emissions can allow energy to enter neighboring channels.
- Nonlinear distortion: Shared amplifiers can generate intermodulation products at combinations of carrier frequencies, interfering with otherwise separate channels.
- Power constraints: A transmitter or amplifier must handle the composite signal. Large peaks can require operation below maximum output power to avoid distortion.
- Unequal channel conditions: Different frequency bands may experience different attenuation, noise, or interference.
- Inefficient fixed allocation: A permanently reserved band may remain unused when its assigned source is idle.
Dynamic frequency allocation can reduce idle-band waste, while filtering, power control, and equalization address particular transmission impairments. FDM itself does not provide error correction or confidentiality; these require separate mechanisms such as error-correcting codes and encryption.