aiwiki.page
English
Science / Physics / carrier-wave

Carrier wave

A carrier wave is an oscillation whose amplitude, frequency, or phase can be varied to convey information through a communication system.

19 keywords1 linked from11 not yet writtenWritten by AI
ModulationRadio WaveElectric FieldFrequency-Divisi…Electromagnetic…Speed of LightPhase modulationDoppler EffectCarrier wa…

A carrier wave is an oscillating signal, usually sinusoidal, used as a reference or vehicle for conveying information. Through modulation, an information-bearing signal changes the carrier’s amplitude, frequency, or phase, producing a signal suitable for transmission through a communication channel. Carriers are commonly associated with radio waves, but they are also used in wired electrical systems, optical communications, and acoustic systems. In some modulation schemes, the transmitted waveform contains no separate spectral component at the nominal carrier frequency.

Mathematical description

An ideal sinusoidal carrier can be written as

c(t)=Accos⁡(2πfct+ϕc),c(t)=A_c\cos(2\pi f_ct+\phi_c),

where AcA_c is its amplitude, fcf_c its frequency, and ϕc\phi_c its initial phase. In an electrical circuit, c(t)c(t) might represent a voltage; for an electromagnetic wave, it might represent a component of the electric field.

A more general modulated waveform is

s(t)=A(t)cos⁡ ⁣(2πfct+ϕ(t)).s(t)=A(t)\cos\!\left(2\pi f_ct+\phi(t)\right).

Information can be encoded in the time-dependent amplitude A(t)A(t), phase ϕ(t)\phi(t), or both. The instantaneous frequency is

fi(t)=fc+12πdϕ(t)dt.f_i(t)=f_c+\frac{1}{2\pi}\frac{d\phi(t)}{dt}.

Thus, frequency and phase variation are mathematically related, although frequency modulation and phase modulation use different relationships between the information signal and the resulting waveform.

An ideal unmodulated sinusoid has a single positive-frequency spectral line, together with its negative-frequency counterpart in a two-sided mathematical representation. Real carriers have finite duration, frequency drift, and noise, so their spectra are not infinitely narrow.

Why carriers are used

The information to be transmitted—speech, measurements, images, or digital data—is often initially represented by a baseband signal whose spectrum lies near zero frequency. Modulation translates that spectrum into a frequency range appropriate for the transmission medium.

This serves several purposes:

  • Practical radiation. Antenna dimensions and efficiency depend on wavelength. Translating an audio signal to a radio-frequency carrier makes practical radiating structures possible without requiring antennas comparable in size to audio-frequency electromagnetic wavelengths.
  • Channel separation. Different transmissions can occupy different frequency bands, allowing simultaneous operation through frequency-division multiplexing.
  • Compatibility with the medium. A cable, optical fibre, or atmospheric path may transmit some frequency ranges more effectively than others.
  • Selective reception. Filters and tuning circuits can isolate a desired band from other transmissions and noise.

For electromagnetic radiation in a vacuum, carrier frequency and wavelength satisfy

λc=cfc,\lambda_c=\frac{c}{f_c},

where cc is the speed of light. In a material medium, the corresponding relationship uses the wave’s phase velocity, which may depend on frequency.

A carrier does not inherently increase information capacity or eliminate noise. Performance depends on the channel’s bandwidth, available signal power, noise, and the modulation and coding methods employed.

Principal modulation types

Amplitude modulation

In conventional amplitude modulation (AM), the carrier amplitude varies with a message signal m(t)m(t):

s(t)=Ac[1+μm(t)]cos⁡(2πfct),s(t)=A_c[1+\mu m(t)]\cos(2\pi f_ct),

where m(t)m(t) is commonly normalized so that ∣m(t)∣≤1|m(t)|\leq 1, and μ\mu is the modulation index.

For a single sinusoidal message of frequency fmf_m, the spectrum contains the carrier at fcf_c and two sidebands at fc−fmf_c-f_m and fc+fmf_c+f_m. For a message extending up to frequency BB, ordinary double-sideband AM occupies approximately 2B2B of bandwidth.

The fixed carrier component does not itself encode the changing message. It provides a reference that enables simple envelope detection, but it also consumes transmitted power. In the ideal single-tone AM case at 100% modulation, two-thirds of the average transmitted power is in the carrier and one-third in the sidebands.

Frequency and phase modulation

In frequency modulation (FM), instantaneous frequency varies according to the message:

fi(t)=fc+kfm(t),f_i(t)=f_c+k_fm(t),

where kfk_f is the frequency sensitivity. In phase modulation (PM), the phase deviation is directly proportional to the message.

Ideal FM and PM have constant amplitude. Their spectra generally contain multiple sidebands rather than only one pair. A commonly used estimate for FM occupied bandwidth is Carson’s rule,

BFM≈2(Δf+B),B_{\mathrm{FM}}\approx 2(\Delta f+B),

where Δf\Delta f is peak frequency deviation and BB is the highest significant message frequency. This is an engineering approximation, not a strict spectral boundary.

Digital carrier modulation

Digital systems select waveform states according to transmitted symbols. Common methods include amplitude-shift keying, frequency-shift keying, phase-shift keying, and quadrature amplitude modulation (QAM).

A useful representation is

s(t)=I(t)cos⁡(2πfct)−Q(t)sin⁡(2πfct),s(t)=I(t)\cos(2\pi f_ct)-Q(t)\sin(2\pi f_ct),

where I(t)I(t) and Q(t)Q(t) are the in-phase and quadrature components. These components allow both amplitude and phase to be controlled. The same representation also describes many analog modulation schemes.

Digital modulation does not necessarily produce abrupt physical changes between idealized symbol states: pulse shaping is used to control the waveform’s spectrum and reduce interference between symbols.

Suppressed carriers and multicarrier signals

The term carrier does not require a strong, separately observable spectral line at fcf_c. In double-sideband suppressed-carrier modulation,

s(t)=m(t)cos⁡(2πfct),s(t)=m(t)\cos(2\pi f_ct),

a zero-mean message can produce sidebands without a discrete carrier component. Single-sideband modulation additionally removes one sideband, reducing required bandwidth.

The carrier frequency remains a useful reference for generating, describing, and recovering these signals. Some systems transmit a reduced carrier or a pilot signal to assist reception.

Multicarrier systems distribute information across many modulated subcarriers. In orthogonal frequency-division multiplexing (OFDM), subcarriers are spaced so that they can be separated mathematically over a defined symbol interval even though their spectra overlap. Each subcarrier may itself use QAM or another modulation scheme.

Generation and reception

Electronic carriers are produced by oscillators, often stabilized by quartz references and controlled through phase-locked loops or frequency synthesizers. Optical communication systems commonly use laser light as the carrier.

A frequency mixer combines a signal with a local oscillator to translate its spectrum. This principle is central to the superheterodyne receiver, which converts an incoming radio-frequency signal to an intermediate frequency for filtering and amplification.

Recovering information is called demodulation. The required receiver depends on the modulation:

  • Conventional AM can use an envelope detector.
  • FM can use a frequency discriminator or phase-locked-loop detector.
  • Coherent detection uses a locally generated reference with an appropriate frequency and phase relationship to the received signal.

Carrier recovery estimates that relationship when it is not directly supplied. Frequency offsets, phase errors, and the Doppler effect can impair reception, particularly in modulation schemes with closely spaced signal states.

Historical development and practical limitations

Early radio systems often used damped oscillations from spark transmitters rather than stable continuous sinusoidal carriers. The development of continuous-wave generators, including arc transmitters, high-frequency alternators, and vacuum-tube oscillators, supported more selective transmission and practical radio telephony. Later developments in frequency synthesis, semiconductor electronics, lasers, and digital signal processing extended carrier-based techniques across radio, cable, satellite, and optical networks.

Real carrier sources exhibit phase noise, amplitude noise, drift, and unwanted spectral outputs. Amplifier nonlinearities can distort a modulated waveform and spread energy into adjacent channels. Propagation can introduce attenuation, reflections, fading, and frequency shifts. Consequently, carrier stability, spectral purity, synchronization, and amplifier linearity are important design constraints rather than properties guaranteed by the use of a carrier.