A face mask is a covering worn over the nose and mouth to reduce the release or inhalation of airborne particles or to provide a barrier against splashes and sprays. Masks are used in healthcare, workplaces, and community settings. Their functions range from limiting the spread of infectious diseases to reducing exposure to dust and other particulate hazards. Medical masks, cloth face coverings, and tight-fitting respirators differ substantially in construction, testing, and protection; the terms are therefore not interchangeable.
Functions and mechanisms
Masks have two principal functions:
- Source control: reducing the amount of respiratory material released into the surroundings by the wearer during breathing, speaking, coughing, or sneezing.
- Wearer protection: reducing the amount of hazardous material reaching the wearer’s nose and mouth.
A device can serve both functions, but its effectiveness for one does not establish equal effectiveness for the other. For example, a loose-fitting medical mask can intercept respiratory emissions while allowing unfiltered air to enter through gaps around its edges.
Respiratory particles occur across a continuous range of sizes. Larger particles generally settle more quickly, while smaller particles can remain suspended as an aerosol. Their movement also depends on airflow, humidity, evaporation, and the conditions under which they are emitted. A simple division into “droplets” and “airborne particles” does not capture this full range of behaviour.
Mask filters are not merely sieves with openings smaller than every particle they capture. Fibrous materials collect particles through several mechanisms:
- Inertial impaction: particles cannot follow changing airflow around fibres and strike them.
- Interception: particles following the airflow pass close enough to contact a fibre.
- Diffusion: very small particles undergo irregular motion that increases their likelihood of contacting fibres.
- Electrostatic attraction: electrically charged fibres attract particles.
Consequently, particles smaller than the visible spaces between fibres can still be captured. The size of an individual virus alone does not determine mask performance: viruses in respiratory emissions are carried in particles containing water, salts, proteins, and other material.
Main types
Medical and surgical masks
Medical masks are generally disposable, loose-fitting devices made from layers of nonwoven material. Surgical masks are used during surgery and other clinical activities to limit contamination from the wearer and, depending on their specifications, provide resistance to fluid splashes.
Their performance standards may assess bacterial filtration, particle filtration, breathability, fluid resistance, and flammability. These are distinct properties. A high filtration result for the mask material does not demonstrate an equally high reduction in inhaled particles when the mask is worn, because air can bypass the material through edge gaps.
A medical mask is not automatically a respirator, and not every disposable mask sold to the public meets a medical-device standard.
Filtering facepiece respirators
Filtering facepiece respirators combine a particle-filtering body with a design intended to seal closely to the face. Examples include N95, FFP2, and FFP3 respirators.
Under the United States NIOSH classification, an N95 filter must achieve at least 95% filtration efficiency under specified laboratory conditions. The “N” designation indicates that the filter is not resistant to oil. European FFP2 and FFP3 classifications use different test requirements, including requirements concerning inward leakage. Classifications from different jurisdictions therefore cannot be treated as identical solely because their numerical filtration thresholds are similar.
Some respirators also meet requirements for use as surgical devices, including fluid resistance. Ordinary particulate respirators are not necessarily fluid-resistant.
Reusable respirators
Elastomeric respirators use a reusable facepiece with replaceable filters or cartridges. Half-face models cover the nose and mouth; full-face models also cover the eyes. Powered air-purifying respirators use a blower to move filtered air into a facepiece or hood.
These devices are commonly distinguished from everyday “face masks,” although they share the purpose of reducing inhalation exposure. Protection against gases or vapours requires appropriate cartridges or other specialised equipment: a particulate filter alone does not provide that protection.
Cloth face coverings
Cloth face coverings vary widely in fabric, number of layers, construction, and fit. Their filtration and breathability are correspondingly variable. Some are manufactured to a defined performance standard, while others have no verified performance specification.
The category “cloth mask” is therefore too broad to imply a single level of protection. Washing, stretching, wear, and changes in shape can also affect performance.
Fit, leakage, and testing
Protection depends on both filtration and fit. A highly efficient filter can provide substantially less protection if a significant proportion of inhaled air bypasses it through gaps.
For tight-fitting respirators, occupational respiratory-protection programmes distinguish between:
- Fit testing, which evaluates whether a particular model and size adequately fits an individual.
- A user seal check, which checks for obvious leakage when the respirator is put on.
A seal check is not a substitute for fit testing. Facial hair in the sealing area, movement, facial dimensions, and interference from other equipment can affect the seal.
Breathing resistance is another important design property. Increasing filtration by adding material can also increase resistance, although fibre engineering and electrostatic filtration can improve this trade-off.
Some respirators contain exhalation valves that allow exhaled air to bypass part or all of the filtering material. Such valves can affect source-control performance, and device designs differ. A face shield, meanwhile, protects against some splashes but does not filter inhaled air or create a respiratory seal.
Uses and evidence
In healthcare, masks and respirators form part of personal protective equipment. Their roles differ according to the hazard, procedure, and setting. Respirators have an established role in occupational protection against airborne hazards, including exposure associated with tuberculosis.
Community masking has been studied particularly in relation to influenza and COVID-19. Evidence comes from laboratory experiments, exposure measurements, observational studies, and randomized controlled trials. Each addresses different questions:
- Laboratory tests establish material filtration or particle capture under controlled conditions.
- Exposure studies examine how fit and use affect inhaled or emitted particles.
- Observational studies examine outcomes in real-world populations but can be affected by differences in behaviour, exposure, and other preventive measures.
- Randomized trials evaluate assigned interventions, but their interpretation depends on adherence, mask type, background transmission, and study design.
An intervention that distributes masks or encourages their use is not equivalent to a controlled test of a consistently worn, well-fitting respirator. Conversely, laboratory filtration performance alone does not quantify the effect of a community masking policy on infection rates.
Masks are one component of public health and infection-control systems. Their observed effect can depend on ventilation, duration and intensity of exposure, population immunity, and other measures, including vaccination.
Historical development
Modern medical masking developed alongside nineteenth-century germ theory and attempts to reduce microbial contamination during surgery. Early surgical masks commonly used gauze or other woven fabrics.
Masks were used during outbreaks in the early twentieth century, including the 1910–1911 Manchurian plague epidemic and the 1918 influenza pandemic. During the twentieth century, nonwoven materials and improved manufacturing methods increasingly replaced reusable gauze in medical masks, while occupational respirators developed their own testing and certification systems.
The COVID-19 pandemic greatly expanded public use and production of masks and respirators. It also drew attention to supply shortages, counterfeit products, differences between certification systems, and the distinction between filtration efficiency and protection during actual wear.
Limitations and wider considerations
Masks do not eliminate exposure. Their performance can decline through leakage, physical damage, altered fit, or changes to filter properties. Cleaning and decontamination processes can affect different materials differently, particularly filters that rely on electrostatic charge.
Reported burdens include discomfort, heat, skin irritation, and difficulty communicating. Face coverings obscure lip movements and facial expressions, creating particular barriers for some people with hearing loss. Transparent designs introduce additional trade-offs involving visibility, fogging, fit, and filtration.
Mask standards assess defined properties under specified conditions rather than guaranteeing protection in every environment. Availability, cost, product quality, and access to suitable sizes influence protection in practice. Disposable masks also contribute to solid waste, while reusable designs require consideration of cleaning, durability, and resource use.