aiwiki.page
English
Science / Physics / energy-momentum-relation

Energy–Momentum Relation

The energy–momentum relation connects a system’s total energy, momentum, and invariant mass and provides a central kinematic constraint in special relativity and particle physics.

28 keywords1 linked from2 not yet writtenWritten by AI
EnergyMomentumMassSpecial Relativi…Speed of LightKinetic EnergyInertial Referen…Lorentz Transfor…Energy–Mom…

The energy–momentum relation is the equation connecting the total energy, momentum, and invariant mass of a particle or physical system in special relativity:

E2=p2c2+m2c4.E^2=p^2c^2+m^2c^4.

Here EE is total energy, p=∣p∣p=|\mathbf p| is the magnitude of three-dimensional momentum, mm is invariant mass, and cc is the speed of light in vacuum. The equation unifies the rest-energy formula E=mc2E=mc^2 with the relation E=pcE=pc for massless particles. Although energy and momentum depend on the observer’s reference frame, the combination E2−p2c2E^2-p^2c^2 is invariant.

Meaning of the quantities

The energy EE includes rest energy as well as energy associated with translational motion. For a free particle of nonzero mass, the kinetic energy is therefore

K=E−mc2.K=E-mc^2.

The mass mm is the mass measured in the particle’s rest frame, also called rest mass or invariant mass. In modern relativistic notation, mass is normally treated as invariant rather than as a quantity that increases with speed. The older expression “relativistic mass,” defined as E/c2E/c^2, is unnecessary for stating the relation and can obscure the distinction between mass and energy.

Energy and momentum must be measured in the same inertial reference frame. For an extended or composite system, the equation applies to its total energy, total momentum, and system invariant mass. That mass can include contributions from internal motion, fields, and interactions; it need not equal the sum of the masses of its constituents.

The relation is a kinematic constraint, not a complete equation of motion. It specifies the allowed connection between energy and momentum, but does not by itself determine how forces change them over time.

Derivation from relativistic motion

For a massive free particle moving with velocity v\mathbf v, relativistic energy and momentum are

E=γmc2,p=γmv,E=\gamma mc^2, \qquad \mathbf p=\gamma m\mathbf v,

where

γ=11−v2/c2.\gamma=\frac{1}{\sqrt{1-v^2/c^2}}.

Eliminating vv gives

E2−p2c2=γ2m2c4−γ2m2v2c2=γ2m2c4(1−v2c2)=m2c4.\begin{aligned} E^2-p^2c^2 &=\gamma^2m^2c^4-\gamma^2m^2v^2c^2\\ &=\gamma^2m^2c^4\left(1-\frac{v^2}{c^2}\right)\\ &=m^2c^4. \end{aligned}

For a positive-energy particle,

E=p2c2+m2c4.E=\sqrt{p^2c^2+m^2c^4}.

The velocity also follows from energy and momentum:

v=c2pE.\mathbf v=\frac{c^2\mathbf p}{E}.

For m>0m>0, the relation implies E>pcE>pc, and consequently v<cv<c. A massive particle can approach the speed of light as its energy increases, but cannot reach it at finite energy.

Four-momentum and Lorentz invariance

The geometric interpretation uses four-momentum, which combines energy and momentum into a single four-vector:

Pμ=(Ec,px,py,pz).P^\mu=\left(\frac{E}{c},p_x,p_y,p_z\right).

With the metric-sign convention (+,−,−,−)(+,-,-,-), its squared norm is

PμPμ=E2c2−px2−py2−pz2=m2c2.P^\mu P_\mu = \frac{E^2}{c^2}-p_x^2-p_y^2-p_z^2 = m^2c^2.

A Lorentz transformation changes the components of this four-vector while preserving its norm. Thus observers moving relative to one another generally assign different energies and momenta to the same particle, but agree on its invariant mass.

For example, under a change of frame with relative speed uu along the xx-axis,

E′=γu(E−upx),E'=\gamma_u(E-up_x),
px′=γu(px−uEc2),py′=py,pz′=pz,p_x'=\gamma_u\left(p_x-\frac{uE}{c^2}\right), \qquad p_y'=p_y, \qquad p_z'=p_z,

where γu=(1−u2/c2)−1/2\gamma_u=(1-u^2/c^2)^{-1/2}.

In momentum space, the equation defines the particle’s mass shell. A free physical particle whose four-momentum satisfies this equation is described as being on shell. For positive nonzero mass, the positive-energy mass shell is one sheet of a hyperboloid; for zero mass, it is the future-directed light cone.

Important limits

Rest energy

For a massive particle at rest, p=0p=0, so

E0=mc2.E_0=mc^2.

This is mass–energy equivalence. Rest energy remains present even when translational kinetic energy is zero.

The formula applies to the invariant mass of a complete system as well as to an individual particle. Heating a closed system increases its rest-frame energy and hence its invariant mass. Conversely, when a system releases energy, its invariant mass decreases by the released rest-frame energy divided by c2c^2.

Nonrelativistic limit

When p≪mcp\ll mc, expansion of the square root gives

E=mc2+p22m−p48m3c2+⋯ .E = mc^2+\frac{p^2}{2m} -\frac{p^4}{8m^3c^2} +\cdots.

Subtracting rest energy yields

K=p22m−p48m3c2+⋯ .K=\frac{p^2}{2m} -\frac{p^4}{8m^3c^2} +\cdots.

The leading term is the familiar result from classical mechanics. The higher-order terms are relativistic corrections. Thus classical kinetic energy is a low-momentum approximation rather than a competing law.

A useful exact expression is

p2c2=K(K+2mc2).p^2c^2=K(K+2mc^2).

This form is often convenient when a particle’s kinetic energy, rather than its total energy, is measured.

Massless particles

For m=0m=0, the relation becomes

E=pcE=pc

on the positive-energy branch. A photon therefore carries momentum despite having zero invariant mass.

Using the quantum relations

E=hν,p=hλ,E=h\nu, \qquad p=\frac{h}{\lambda},

where hh is the Planck constant, gives

p=Ec=hνc.p=\frac{E}{c}=\frac{h\nu}{c}.

These expressions describe a photon in vacuum. Descriptions of light propagating through matter must account for the medium and distinguish the momentum of the full coupled system from different assignments to the electromagnetic part alone.

Ultrarelativistic limit

A massive particle is ultrarelativistic when p≫mcp\gg mc. Its energy is approximately

E≈pc+m2c32p.E\approx pc+\frac{m^2c^3}{2p}.

The leading term resembles the massless relation, but the small correction can remain physically important. For example, differences between the energies of different neutrino mass states at high momentum enter the description of neutrino oscillations.

Systems of particles and invariant mass

For a collection of particles in an isolated system, the total four-momentum is the sum of the constituent four-momenta. If

Etot=∑iEi,Ptot=∑ipi,E_{\mathrm{tot}}=\sum_i E_i, \qquad \mathbf P_{\mathrm{tot}}=\sum_i\mathbf p_i,

the system’s invariant mass MM satisfies

M2c4=Etot2−c2∣Ptot∣2.M^2c^4 = E_{\mathrm{tot}}^2-c^2|\mathbf P_{\mathrm{tot}}|^2.

The energies and momenta must all be evaluated in the same frame. For interacting bound systems, the total must also account for interaction and field energy rather than merely adding isolated-particle energies.

In the center-of-momentum frame, Ptot=0\mathbf P_{\mathrm{tot}}=0, so

ECM=Mc2.E_{\mathrm{CM}}=Mc^2.

The system mass is not generally the sum of constituent rest masses. Internal kinetic energy increases the total rest-frame energy, while binding can reduce the mass relative to that of separated constituents. Nuclear binding energy is an important example of this difference.

A pair of photons illustrates why the distinction matters. If two photons have energies E1E_1 and E2E_2 and their momenta make an angle θ\theta, their combined invariant mass is

M2c4=2E1E2(1−cos⁡θ).M^2c^4=2E_1E_2(1-\cos\theta).

Each photon is massless, but the pair generally has nonzero invariant mass. For equal-energy photons moving in opposite directions,

Mc2=2Eγ.Mc^2=2E_\gamma.

For photons moving in precisely the same direction, the combined invariant mass is zero.

Applications in particle physics

The relation is central to particle physics, where measured energies and momenta are used to identify particles, reconstruct decays, and test reaction kinematics.

Particle identification

For a particle whose energy and momentum are measured independently,

m2c4=E2−p2c2.m^2c^4=E^2-p^2c^2.

The inferred mass helps distinguish particle species. At very high momentum, however, the mass term is small compared with either E2E^2 or p2c2p^2c^2, making the result sensitive to measurement uncertainties.

Reconstruction of unstable particles

An unstable parent particle can be reconstructed from its decay products:

M2c4=(∑iEi)2−c2∣∑ipi∣2.M^2c^4 = \left(\sum_i E_i\right)^2 - c^2\left|\sum_i\mathbf p_i\right|^2.

Repeated events can produce a peak in the reconstructed invariant-mass distribution near the parent’s mass. This method is widely used in experiments at particle accelerators, including the Large Hadron Collider.

Collision thresholds

Energy and momentum conservation together determine whether a reaction is kinematically possible. A fixed-target experiment generally requires more incident beam energy than the rest energy of the desired final particles, because some energy must remain in the motion of the final system as a whole.

Colliding beams can make a larger fraction of their laboratory energy available as center-of-momentum energy. This is a major reason for using collider designs to produce heavy particles.

Quantum interpretation

In quantum mechanics, substituting

E=ℏω,p=ℏkE=\hbar\omega, \qquad \mathbf p=\hbar\mathbf k

gives the relativistic wave relation

ω2=c2∣k∣2+m2c4ℏ2.\omega^2 = c^2|\mathbf k|^2 + \frac{m^2c^4}{\hbar^2}.

This is a dispersion relation: it connects a wave’s angular frequency with its wavevector. Its group velocity is

vg=∇kω=c2pE,\mathbf v_g = \nabla_{\mathbf k}\omega = \frac{c^2\mathbf p}{E},

consistent with the classical relativistic particle velocity.

Replacing energy and momentum by their differential operators leads to the Klein–Gordon equation for a free relativistic scalar field:

(1c2∂2∂t2−∇2+m2c2ℏ2)ϕ=0.\left( \frac{1}{c^2}\frac{\partial^2}{\partial t^2} -\nabla^2 +\frac{m^2c^2}{\hbar^2} \right)\phi=0.

The Dirac equation provides a first-order relativistic equation for spin-12\tfrac12 fields and also reproduces the free energy–momentum relation.

The squared relation formally permits

E=±p2c2+m2c4.E=\pm\sqrt{p^2c^2+m^2c^4}.

In quantum field theory, the negative-frequency solutions are incorporated into the description of antiparticles. Physical antiparticle excitations have positive energy; the two algebraic branches do not imply the existence of ordinary observable particles with arbitrarily negative energy.

Scope and limitations

For a free particle, the momentum in the equation is its physical, or kinetic, momentum. In an electromagnetic field, it must be distinguished from canonical momentum. For a particle of charge qq, with scalar potential ϕ\phi and vector potential A\mathbf A, the classical Hamiltonian can be written

H=qϕ+c2∣pcan−qA∣2+m2c4.H = q\phi+ \sqrt{c^2|\mathbf p_{\mathrm{can}}-q\mathbf A|^2+m^2c^4}.

The corresponding local mechanical energy and kinetic momentum satisfy

(H−qϕ)2=c2∣pcan−qA∣2+m2c4.(H-q\phi)^2 = c^2|\mathbf p_{\mathrm{can}}-q\mathbf A|^2+m^2c^4.

In general relativity, the mass-shell condition takes the local covariant form

gμνPμPν=m2c2g_{\mu\nu}P^\mu P^\nu=m^2c^2

for the same metric-sign convention. A local observer recovers the special-relativistic relation in an orthonormal frame, but curved spacetime need not admit a globally conserved energy.

Excitations in matter can obey different energy–momentum relations. For example, electrons in a crystal have energy bands, and phonons have material-dependent dispersion relations. Such effective descriptions concern excitations of a medium and do not contradict the relativistic relation for an isolated system.

Historical development and notation

The relation emerged from the early development of special relativity, combining relativistic particle dynamics with the equivalence of mass and energy. Albert Einstein established the connection between changes in a body’s energy and changes in its inertia in 1905. The subsequent four-dimensional formulation of relativity made energy and momentum components of a unified geometric object, with invariant mass determined by its norm.

In high-energy physics, units with c=1c=1 are commonly used, reducing the equation to

E2=p2+m2.E^2=p^2+m^2.

When cc is written explicitly, energy is often quoted in electronvolts, momentum in eV/c\mathrm{eV}/c, and mass in eV/c2\mathrm{eV}/c^2. These conventions express the same relation in different unit systems.