An electrolytic cell is an electrochemical cell in which an external source of electrical energy drives a nonspontaneous oxidation–reduction reaction. It contains electrodes in contact with an ion-conducting medium and usually operates with a direct-current power supply. The process occurring in the cell is called electrolysis. Electrolytic cells are used to manufacture chemicals, extract and purify metals, deposit surface coatings, and produce hydrogen.
Components and operation
A typical electrolytic cell has two electrodes, an electrolyte, an external electrical circuit, and a power source. The electrolyte may be an aqueous solution, a molten salt, or an ion-conducting solid or polymer. Some cells also include a membrane or porous separator that permits ionic transport while limiting the mixing of reactants and products.
The two electrodes are defined by the reactions occurring at them:
- Anode: the electrode at which oxidation occurs, releasing electrons.
- Cathode: the electrode at which reduction occurs, consuming electrons.
In a conventional, externally powered electrolytic cell, the anode is connected to the positive terminal of the power supply and the cathode to the negative terminal. The supply withdraws electrons from the anode and supplies them to the cathode.
Electrons carry charge through the metallic circuit, while ions carry charge through the electrolyte. Positively charged ions migrate toward the cathode, and negatively charged ions migrate toward the anode, although diffusion and fluid motion also contribute to transport. The species that carries ionic current need not be the species discharged at an electrode: water, for example, can react instead of a dissolved metal ion.
Bulk electrolyte remains approximately electrically neutral during operation. Sustained electrode reactions therefore require ionic transport that compensates for local charge changes; electrons do not simply travel through the electrolyte from one electrode to the other.
Comparison with a galvanic cell
A galvanic cell converts the energy of a spontaneous chemical reaction into electrical energy. An electrolytic cell consumes electrical energy to drive a reaction in the opposite thermodynamic direction.
The definitions of anode and cathode do not change between the two modes, but their usual terminal polarities do:
| Feature | Electrolytic cell | Galvanic cell |
|---|---|---|
| Main energy conversion | Electrical energy to chemical change | Chemical energy to electrical energy |
| Overall reaction under operating conditions | Externally driven | Spontaneous |
| Anode | Positive | Negative |
| Cathode | Negative | Positive |
| Electrode processes | Oxidation at anode; reduction at cathode | Oxidation at anode; reduction at cathode |
A rechargeable battery operates galvanically during discharge and electrolytically during charging. In strict electrochemical terminology, the electrode undergoing oxidation is always the anode, so anode and cathode roles reverse when the reaction reverses. Battery engineering often retains electrode names based on discharge operation.
Thermodynamics and required voltage
For an overall cell reaction written in a specified direction, its change in Gibbs free energy is related to its reversible cell potential by
where is the number of electrons transferred per reaction as written and is the Faraday constant.
If , the reaction requires an external energy input. The minimum reversible electrical work per mole of reaction is , and the corresponding reversible electrolysis voltage magnitude is
This voltage depends on temperature, pressure, and reactant and product activities. The Nernst equation describes how electrode equilibrium potentials vary with these conditions.
A practical cell requires a higher voltage than the reversible value because current flow introduces losses. A simplified expression is
where and represent anodic and cathodic overpotentials, is the current, and is the effective resistance of the electrolyte, separator, and other conducting parts. Concentration-related losses may be included within the overpotential terms or treated separately.
Overpotential reflects the departure from equilibrium needed to sustain an electrode reaction at a given rate. It depends on electrode material, surface condition, current density, temperature, and mass transport. Consequently, equilibrium potentials alone do not always predict which products dominate when several electrode reactions are possible.
Electrical input is also not identical to total energy input. For processes such as water electrolysis, heat can supply part of the reaction energy. The thermoneutral voltage, based on reaction enthalpy rather than Gibbs free energy, is therefore distinct from the reversible voltage.
Representative reactions
Molten sodium chloride
Molten sodium chloride illustrates electrolysis without competition from water. The electrode reactions are
The overall reaction is
Industrial cells separate sodium and chlorine to prevent their recombination. Their construction must also accommodate the high temperature needed to maintain the molten electrolyte.
The products differ when sodium chloride is dissolved in water: under conventional aqueous conditions, water is reduced preferentially to sodium ions, producing hydrogen rather than sodium metal.
Water electrolysis
Water electrolysis produces hydrogen and oxygen:
In an acidic or proton-conducting cell, representative half-reactions are
In an alkaline cell, they can instead be written as
Both descriptions give the same overall reaction. At , with liquid water and gases in their standard states, the reversible voltage is approximately . Practical operating voltages are higher because of kinetic and resistive losses.
Pure water conducts poorly, so practical systems use an electrolyte or ion-conducting membrane. Separators also limit hydrogen–oxygen mixing.
Copper transfer
With suitable copper electrodes in an aqueous copper salt solution, the principal reactions can be
Copper dissolves at the anode and deposits at the cathode. The idealized net effect is transfer of copper between electrodes rather than formation of a new bulk chemical compound. Industrial copper electrorefining uses this principle to separate copper from many impurities.
Quantitative laws
Michael Faraday established the quantitative relationship between electrical charge and chemical change in the 1830s. The laws of electrolysis relate the amount of product formed to the total charge passed:
For constant current, . If producing one mole of a substance requires moles of electrons, the theoretical amount formed is
For electrodeposition, the theoretical deposited mass is
where is the product’s molar mass.
Competing reactions can consume some of the charge. Faradaic efficiency, also called current efficiency, expresses the fraction of charge associated with the desired product:
High Faradaic efficiency does not necessarily imply high energy efficiency. A cell may direct nearly all its current toward the desired product while consuming excessive energy because of a high operating voltage.
Cell designs and applications
Electrolytic cells vary considerably in geometry, materials, electrolyte composition, and operating conditions.
Undivided cells have both electrodes in one electrolyte compartment. They are relatively simple, but products may mix or react again at the opposite electrode.
Divided cells use membranes or diaphragms to separate electrode compartments. Separation improves product purity and can suppress unwanted reactions, but generally adds resistance and complexity.
Molten-salt cells operate at elevated temperatures and are important for metals that cannot readily be deposited from water. Aluminium production, for example, reduces alumina dissolved in a molten fluoride electrolyte; conventional carbon anodes are consumed during operation.
Flow cells circulate electrolyte through electrode compartments. Flow helps control reactant supply, product removal, temperature, and concentration gradients.
Solid-electrolyte cells use ion-conducting membranes, polymers, or ceramics. Water electrolyzers include alkaline, proton-exchange-membrane, anion-exchange-membrane, and high-temperature solid-oxide designs.
Major applications include:
- Chemical manufacture: production of chlorine and sodium hydroxide from brine, as well as hydrogen and other chemicals.
- Metal extraction and purification: electrowinning metals from solutions or melts and electrorefining impure metals.
- Electroplating: deposition of metal coatings for corrosion protection, appearance, wear resistance, or electrical function.
- Surface modification: anodizing and related processes that form or alter surface layers.
- Electrosynthesis: production of organic and inorganic compounds through controlled electrode reactions.
- Energy storage: charging rechargeable electrochemical storage systems.
- Analysis: controlled electrolysis used to determine substances from charge consumption or deposited mass.
Performance limits and environmental considerations
Cell performance depends on more than the applied voltage. Electrode area controls current density, while electrolyte composition, electrode spacing, and separators influence resistance. Reactant depletion near an electrode can impose a mass-transfer limit; increasing voltage beyond that limit may favor side reactions instead of increasing the desired production rate.
Gas bubbles can block active surfaces and increase resistance. Electrode corrosion, catalyst degradation, membrane damage, and product crossover can reduce efficiency and operating lifetime. Heat generation and removal are important because temperature affects conductivity, reaction rates, material stability, and product selectivity.
Environmental impacts depend on the complete process rather than electrolysis alone. Relevant factors include the electricity source, electrode and membrane manufacture, electrolyte handling, and management of by-products. Hydrogen made by water electrolysis, for example, has no carbon dioxide emission from the water-splitting reaction itself, but its overall emissions depend strongly on the electricity supply.
Some processes involve flammable gases, toxic products, corrosive electrolytes, reactive metals, or high-temperature melts. Industrial cell design therefore includes product separation, containment, thermal control, and electrical protection appropriate to the specific chemistry.