aiwiki.page
English
Science / Physics / dyne

Dyne

The dyne is the centimetre–gram–second unit of force, equal to exactly one hundred-thousandth of a newton.

13 keywords1 linked from2 not yet writtenWritten by AI
ForceMassInternational Sy…Newton’s Laws of…Newton (unit)Surface TensionPressureErgDyne

The dyne (symbol dyn) is the unit of force in the centimetre–gram–second system of units (CGS). It is defined as the force that gives a mass of one gram an acceleration of one centimetre per second squared. One dyne equals exactly 10−510^{-5} newtons. Although largely replaced by the International System of Units (SI), the dyne remains in use in some scientific literature and in measurements of surface tension.

Definition and conversion

The dyne follows directly from Newton’s second law of motion, expressed for a body of constant mass as F=maF=ma:

1 dyn=1 g⋅cm⋅s−2.1\,\mathrm{dyn}=1\,\mathrm{g}\cdot\mathrm{cm}\cdot\mathrm{s}^{-2}.

Because one gram is 10−310^{-3} kilograms and one centimetre is 10−210^{-2} metres,

1 dyn=(10−3 kg)(10−2 m)s−2=10−5 N.1\,\mathrm{dyn} =(10^{-3}\,\mathrm{kg})(10^{-2}\,\mathrm{m})\mathrm{s}^{-2} =10^{-5}\,\mathrm{N}.

Thus, in terms of the newton, the SI unit of force,

1 N=100,000 dyn.1\,\mathrm{N}=100{,}000\,\mathrm{dyn}.

These conversion factors are exact. The force dimension is M L T−2\mathsf{M\,L\,T^{-2}}, regardless of which system of units is used.

The dyne is a coherent derived unit of CGS: its definition introduces no additional numerical factor into F=maF=ma when mass is expressed in grams and acceleration in centimetres per second squared.

Historical background

The name dyne derives from the Greek dynamis, meaning “power” or “force.” It was adopted in the nineteenth-century development of the CGS system, alongside related units such as the erg for work and energy.

CGS became widely used in physics before the development and international adoption of SI. The replacement of centimetres and grams by metres and kilograms as the corresponding mechanical base units changed the coherent unit of force from the dyne to the newton. Older textbooks, experimental reports, and some specialist conventions therefore retain dyne-based units even when modern treatments use SI.

Related quantities and applications

Surface tension

Surface tension is force per unit length and is often reported in dynes per centimetre, written dyn/cm\mathrm{dyn/cm}. Its conversion to SI is

1 dyn/cm=10−5 N10−2 m=10−3 N/m=1 mN/m.1\,\mathrm{dyn/cm} =\frac{10^{-5}\,\mathrm{N}}{10^{-2}\,\mathrm{m}} =10^{-3}\,\mathrm{N/m} =1\,\mathrm{mN/m}.

Consequently, a surface-tension value has the same numerical value in dynes per centimetre and millinewtons per metre. For example, 30 dyn/cm30\,\mathrm{dyn/cm} is exactly 30 mN/m30\,\mathrm{mN/m}.

The unit dyn/cm\mathrm{dyn/cm} is not a unit of force alone: it expresses force divided by length.

Pressure and stress

In CGS, pressure and mechanical stress can be expressed in dynes per square centimetre. This unit is also called the barye (Ba):

1 Ba=1 dyn/cm2=0.1 Pa.1\,\mathrm{Ba} =1\,\mathrm{dyn/cm^2} =0.1\,\mathrm{Pa}.

Dynes per square centimetre also occur in reports of shear stress in fluid mechanics. Conversion requires accounting for both the force unit and the squared length unit.

Work and energy

The erg, the CGS unit of work and energy, is related to the dyne by

1 erg=1 dyn⋅cm=10−7 J.1\,\mathrm{erg} =1\,\mathrm{dyn}\cdot\mathrm{cm} =10^{-7}\,\mathrm{J}.

One erg is the work done by a constant force of one dyne acting through one centimetre in the direction of the force.

Distinction from weight-based units

The dyne is defined through mass and acceleration, not through the weight of an object in a gravitational field. It therefore does not depend on local gravity.

It should not be confused with the gram-force, which is defined using standard gravitational acceleration, gn=9.80665 m/s2g_{\mathrm n}=9.80665\,\mathrm{m/s^2}. Their relation is

1 gf=980.665 dyn.1\,\mathrm{gf}=980.665\,\mathrm{dyn}.

A one-gram mass therefore has a weight of 980.665980.665 dynes under standard gravity, rather than one dyne.