DNA supercoiling is the torsional deformation of a DNA double helix relative to its relaxed state, often expressed as coiling of the helix’s axis around itself. It arises when DNA is underwound or overwound and cannot freely rotate to relieve the resulting strain. Supercoiling affects DNA compaction, strand separation, and interactions with proteins, making it important in DNA replication, transcription, and the organization of chromosomes. Its behavior reflects both the geometry of DNA and the topological constraints imposed by closed circles, fixed attachments, and cellular structures.
Physical and topological basis
DNA has two distinct levels of winding. Within the double helix, the two strands wind around a common axis. In supercoiled DNA, that axis may itself follow a coiled path. These levels are related but are not interchangeable: a change in winding can be stored as altered helical twist, altered shape of the axis, or a combination of both.
Supercoiling is particularly straightforward to define for covalently closed circular DNA, such as many plasmids. Because neither strand has a free end, the strands cannot change their total linking without a strand break or passage of one strand through another. Linear DNA can also sustain supercoiling if its ends, or internal boundaries, prevent rotation. Freely rotating linear DNA generally releases torsional strain.
Linking number, twist, and writhe
Three quantities describe the topology and geometry of a closed DNA duplex:
- Linking number, , is the signed number of times the two closed strands are linked. It is an integer and remains unchanged during continuous deformation that does not involve strand breakage or passage.
- Twist, , measures how much the strands wind around the local axis of the duplex.
- Writhe, , measures the three-dimensional coiling of that axis.
They obey the relation
Twist and writhe need not be integers. They can change continuously and compensate for one another while linking number remains fixed. The equation is exact for a closed ribbon representation of DNA; applying it to an open molecule requires suitable boundary conditions or a defined closure.
For a relaxed reference duplex of base pairs with helical repeat ,
For ordinary B-form DNA under commonly used solution conditions, is approximately 10.5 base pairs per turn, although sequence, temperature, and solution composition affect it. The reference value need not be an integer.
The linking difference is
and the superhelical density is
This normalized measure allows comparison between DNA molecules of different lengths. For example, a 4,200-base-pair circle with a reference linking number of 400 and an actual linking number of 380 has and .
Negative and positive supercoiling
Negative supercoiling corresponds to a linking number below the relaxed reference value. It favors underwinding of the duplex and can lower the energetic cost of local strand separation.
Positive supercoiling corresponds to a linking number above the reference value. It generally favors overwinding or positive writhe and makes ordinary strand separation more energetically costly.
These definitions concern linking difference, not simply the apparent handedness of a drawing. The geometry of a supercoil depends on how DNA is arranged in space.
Two common arrangements are:
- Plectonemic supercoils, in which sections of the duplex intertwine, often producing branched, telephone-cord-like structures.
- Toroidal supercoils, in which DNA follows a path around an imaginary torus or wraps around a protein assembly.
DNA wrapped around a nucleosome is a major biological example of constrained, predominantly toroidal winding. Free circular DNA in solution commonly forms plectonemes.
Negative supercoiling does not mean that the ordinary right-handed double helix has become left-handed. Most of the duplex can remain in the B form while its twist and larger-scale conformation change.
Energetics and structural transitions
Supercoiling stores elastic energy through twisting and bending of DNA. The distribution between twist and writhe depends on DNA length, bending and torsional stiffness, applied tension, and interactions with ions and proteins.
When a stretched DNA molecule is progressively twisted, it initially stores much of the deformation as twist. Beyond a buckling threshold, formation of plectonemic writhe becomes favorable. Additional turns can then increase the length or number of plectonemic regions rather than simply increasing local twist.
The associated torque can also drive structural changes. Under appropriate conditions, negative supercoiling promotes:
- Local opening of the duplex.
- Formation of cruciform structures at suitable inverted repeats.
- Conversion of suitable sequences into left-handed Z-DNA.
- Other sequence-dependent non-B DNA conformations.
These transitions can absorb part of the imposed linking difference. Consequently, superhelical density alone does not uniquely specify DNA shape or local torsional stress.
The surrounding environment matters as well. Electrostatic repulsion opposes close approach of DNA segments, while dissolved ions screen that repulsion. Mechanical tension tends to suppress extensive coiling and can shift the balance toward twist or structural transitions.
Enzymatic control
Cells regulate DNA topology using DNA topoisomerases, enzymes that transiently break DNA strands, permit controlled rearrangement, and reseal the breaks. Their reactions change linking number or remove related topological obstacles.
Type I topoisomerases
Type I topoisomerases transiently cleave one strand. Different subfamilies use different mechanisms: some pass another strand through the break, whereas others allow controlled rotation around the intact strand.
Many type I enzymes relax supercoils without directly consuming ATP. Their substrate preferences differ. Bacterial topoisomerase I, for example, primarily relaxes negatively supercoiled DNA, whereas type IB enzymes can relax both positive and negative supercoils.
Type II topoisomerases
Type II topoisomerases transiently cleave both strands of one DNA segment and pass another duplex segment through the opening. Their strand-passage cycle typically changes linking number by two and requires ATP.
DNA gyrase, found in bacteria, can actively introduce negative supercoils. It also removes positive supercoils generated during DNA processing. Bacterial topoisomerase IV is especially important for separating interlinked daughter DNA molecules after replication and can also relax supercoils.
Reverse gyrase, a distinct enzyme found in many hyperthermophilic archaea and some bacteria, can introduce positive supercoils using ATP.
Supercoiling is distinct from knotting and catenation. A DNA knot concerns the path of a single DNA molecule, whereas a catenane consists of linked DNA rings. Topoisomerases can resolve several of these problems, but the underlying topological properties differ.
Biological functions
DNA replication and transcription
Separating the strands of a constrained duplex creates a topological problem: winding displaced from an opening region must be accommodated elsewhere unless DNA or its associated machinery can rotate.
During replication, positive supercoils can accumulate ahead of the replication fork. Rotation of the fork can instead transfer some of the topological burden into intertwining of newly replicated duplexes behind it. Topoisomerases help relieve these constraints and separate daughter molecules.
Transcription can similarly generate positive supercoiling ahead of RNA polymerase and negative supercoiling behind it when rotation is restricted. This is known as the twin-supercoiled-domain model. The extent of each domain depends on barriers, enzyme activity, and the movement of the transcription machinery.
Negative supercoiling can facilitate opening at some promoters, but its effects on gene expression are not uniformly activating. Promoter sequence, regulatory proteins, and neighboring transcription units influence the response.
Chromosome organization
Supercoiling contributes to genome compaction, but it is not merely a packaging device. It also changes the mechanical and chemical accessibility of DNA.
Bacterial chromosomes contain topological domains that can partly insulate torsional changes from one another. DNA-binding proteins and other chromosome-associated structures influence domain boundaries and supercoil distribution.
In eukaryotes, DNA is organized into chromatin. Wrapping around histone cores constrains DNA winding, and nucleosome assembly changes the linking number of closed DNA substrates. The linking-number change associated with a nucleosome is not identical to the number of visible turns wrapped around its core, because both twist and writhe contribute.
Nucleosome remodeling, transcription, and topoisomerase activity together produce a dynamic torsional environment. A single superhelical-density value therefore cannot fully describe the topology of an entire eukaryotic chromosome.
Experimental study
Several complementary methods reveal DNA supercoiling.
Gel electrophoresis. Closed circular DNA molecules with the same sequence but different linking numbers are called topoisomers. They can migrate differently during gel electrophoresis. Intercalating compounds alter DNA twist and help resolve topoisomer distributions. Two-dimensional gels can distinguish forms that would otherwise migrate together.
Microscopy. Electron microscopy and atomic force microscopy reveal supercoiled conformations, including plectonemes and branches. Preparation procedures can alter DNA shape, so observed conformations must be interpreted in relation to experimental conditions.
Single-molecule manipulation. Magnetic and optical manipulation methods allow DNA molecules to be stretched and twisted under controlled conditions. Measurements of extension, rotation, and torque reveal buckling, structural transitions, and topoisomerase activity.
Cellular mapping. Methods based on topology-sensitive chemical interactions or DNA-associated proteins can provide information about local supercoiling. Their signals may also depend on sequence, protein occupancy, accessibility, and the measurement procedure.
A single-strand nick in otherwise closed circular DNA usually permits rotational relaxation and removes the fixed linking-number constraint. This property is useful experimentally, but it also means that strand breaks introduced during extraction can erase the supercoiling originally present in a cell.
Historical development
The DNA double-helix model established in 1953 made clear that separating intertwined strands would require a mechanism for managing their winding. During the 1960s, studies of circular viral DNA, including work by Jerome Vinograd and colleagues, provided direct evidence for supercoiled DNA and helped establish its topological interpretation.
The discovery of DNA topoisomerase activity by James Wang in 1971 demonstrated enzymatic control of DNA linking. The identification of DNA gyrase in 1976 established that cells could use ATP to introduce negative supercoils actively. Subsequent single-molecule experiments connected these biochemical findings with direct measurements of DNA mechanics.