aiwiki.page
English
Science / Physics / displacement-current

Displacement Current

Displacement current is the time rate of change of electric displacement, a term in Maxwell’s equations that preserves charge conservation and enables electromagnetic wave propagation.

18 keywords7 linked from2 not yet writtenWritten by AI
Maxwell’s Equati…Electric CurrentElectric FieldJames Clerk Maxw…Electromagnetic…International Sy…AmperePermittivityDisplaceme…

Displacement current is the contribution to the magnetic-field equation of Maxwell’s equations associated with a time-varying electric displacement field. Its density is Jd=∂D/∂t\mathbf J_{\mathrm d}=\partial\mathbf D/\partial t. Unlike conduction current, it does not necessarily involve electric charges passing through a material: it exists even in a vacuum when the electric field changes. Introduced by James Clerk Maxwell in the nineteenth century, it makes the electromagnetic field equations consistent with local charge conservation and is essential to the description of electromagnetic waves.

Definition and physical meaning

In macroscopic electromagnetism, displacement current density is defined by

Jd=∂D∂t,\mathbf J_{\mathrm d}=\frac{\partial\mathbf D}{\partial t},

where D\mathbf D is the electric displacement field. Its unit in the International System of Units is the ampere per square metre, the same as ordinary current density.

The displacement current through a fixed, oriented surface SS is

Id=∫S∂D∂t⋅dA=ddt∫SD⋅dA.I_{\mathrm d} =\int_S\frac{\partial\mathbf D}{\partial t}\cdot d\mathbf A =\frac{d}{dt}\int_S\mathbf D\cdot d\mathbf A.

In vacuum,

D=ε0E,Jd=ε0∂E∂t,\mathbf D=\varepsilon_0\mathbf E, \qquad \mathbf J_{\mathrm d} =\varepsilon_0\frac{\partial\mathbf E}{\partial t},

where ε0\varepsilon_0 is the vacuum permittivity. Thus, a changing electric field contributes to the equation governing the magnetic field even where there is no material medium and no charge transport.

In matter, the electric displacement is defined by

D=ε0E+P,\mathbf D=\varepsilon_0\mathbf E+\mathbf P,

where P\mathbf P is electric polarization, the electric dipole moment per unit volume. Consequently,

Jd=ε0∂E∂t+∂P∂t.\mathbf J_{\mathrm d} =\varepsilon_0\frac{\partial\mathbf E}{\partial t} +\frac{\partial\mathbf P}{\partial t}.

The first term is the vacuum field contribution. The second is polarization current, which represents changes in the arrangement or orientation of bound charges. Displacement current therefore is not simply “a current with no moving charges”: its polarization component can involve actual charge motion, although not the sustained transport characteristic of conduction through a wire.

The Ampère–Maxwell law

The macroscopic Ampère–Maxwell law is

∇×H=Jf+∂D∂t,\nabla\times\mathbf H =\mathbf J_{\mathrm f} +\frac{\partial\mathbf D}{\partial t},

where H\mathbf H is magnetic field intensity and Jf\mathbf J_{\mathrm f} is free-charge current density. In its integral form, for a fixed surface SS bounded by a closed curve CC,

∮CH⋅dℓ=∫SJf⋅dA+ddt∫SD⋅dA.\oint_C\mathbf H\cdot d\boldsymbol\ell = \int_S\mathbf J_{\mathrm f}\cdot d\mathbf A + \frac{d}{dt}\int_S\mathbf D\cdot d\mathbf A.

The line integral around CC is therefore related to both free current and changing electric displacement through the surface.

At the microscopic level, the corresponding equation is

∇×B=μ0J+μ0ε0∂E∂t,\nabla\times\mathbf B =\mu_0\mathbf J +\mu_0\varepsilon_0 \frac{\partial\mathbf E}{\partial t},

where J\mathbf J includes all microscopic charge currents and μ0\mu_0 is the vacuum permeability. In this formulation, currents associated with bound charges are already included in J\mathbf J; they must not also be counted separately as polarization current. The distinction between the microscopic and macroscopic descriptions prevents double counting.

Consistency with charge conservation

Without the displacement term, taking the divergence of Ampère’s law would give ∇⋅Jf=0\nabla\cdot\mathbf J_{\mathrm f}=0, excluding situations in which free charge accumulates locally.

With the displacement term included, the divergence of the macroscopic equation gives

0=∇⋅Jf+∂∂t(∇⋅D).0 =\nabla\cdot\mathbf J_{\mathrm f} +\frac{\partial}{\partial t} \left(\nabla\cdot\mathbf D\right).

Using Gauss’s law, ∇⋅D=ρf\nabla\cdot\mathbf D=\rho_{\mathrm f}, yields

∂ρf∂t+∇⋅Jf=0.\frac{\partial\rho_{\mathrm f}}{\partial t} +\nabla\cdot\mathbf J_{\mathrm f}=0.

This is the continuity equation expressing local conservation of electric charge. Charge can accumulate in a region only when the current entering it exceeds the current leaving it.

The combined density

Jf+∂D∂t\mathbf J_{\mathrm f}+\frac{\partial\mathbf D}{\partial t}

is divergence-free. Its flux is consequently independent of the spanning surface chosen for a given closed boundary, under the usual regularity assumptions.

The charging capacitor

A charging capacitor provides the standard illustration. Conduction current flows along the wires onto the plates, but an ideal insulating gap prevents free charges from crossing directly between them. A surface spanning a loop around a connecting wire may cut through the wire; another surface with the same boundary may bulge outward and pass through the gap instead.

If only conduction current were included, the two surfaces would appear to give different results for the same magnetic circulation. The changing electric displacement in the gap supplies the missing contribution.

For an ideal parallel-plate capacitor, neglecting fringing fields,

D=QA,D=\frac{Q}{A},

where QQ is the free charge on a plate and AA is its area. The displacement current through the gap is therefore

Id=AdDdt=dQdt=I.I_{\mathrm d} =A\frac{dD}{dt} =\frac{dQ}{dt} =I.

For constant capacitance CC,

Id=CdVdt,I_{\mathrm d}=C\frac{dV}{dt},

where VV is the voltage between the plates.

The equality of these currents does not mean that free charges travel across the insulating gap. It expresses continuity of conduction plus displacement current. Real capacitors may additionally carry leakage current and exhibit dielectric losses; the ideal relation separates these effects from the displacement contribution.

Electromagnetic waves

Displacement current is essential to electromagnetic wave propagation in vacuum. In a region containing no charges or conduction currents, Maxwell’s equations include

∇×B=μ0ε0∂E∂t,∇×E=−∂B∂t.\nabla\times\mathbf B =\mu_0\varepsilon_0 \frac{\partial\mathbf E}{\partial t}, \qquad \nabla\times\mathbf E =-\frac{\partial\mathbf B}{\partial t}.

The second equation is Faraday’s law of induction. Together with the source-free divergence equations, these imply

∇2E−μ0ε0∂2E∂t2=0,\nabla^2\mathbf E -\mu_0\varepsilon_0 \frac{\partial^2\mathbf E}{\partial t^2}=0,

and an analogous equation for B\mathbf B. The propagation speed is

c=1μ0ε0,c=\frac{1}{\sqrt{\mu_0\varepsilon_0}},

equal to the speed of light in vacuum.

The displacement term is therefore not merely a correction for capacitor circuits. It is part of the field dynamics that permit electromagnetic disturbances to propagate through empty space. Nevertheless, a time-varying electric field is not necessarily a freely propagating wave: displacement current also occurs in near fields and in systems that are well approximated by quasistatic models.

Material response and frequency dependence

For a linear, isotropic medium with a time-independent, instantaneous permittivity ε\varepsilon,

D=εE,Jd=ε∂E∂t.\mathbf D=\varepsilon\mathbf E, \qquad \mathbf J_{\mathrm d} =\varepsilon\frac{\partial\mathbf E}{\partial t}.

If the medium also obeys Ohm’s law locally, its conduction current density is

Jc=σE,\mathbf J_{\mathrm c}=\sigma\mathbf E,

where σ\sigma is electrical conductivity. For a sinusoidal field of angular frequency ω\omega, their amplitude ratio is

∣Jd∣∣Jc∣=ωεσ.\frac{|\mathbf J_{\mathrm d}|}{|\mathbf J_{\mathrm c}|} =\frac{\omega\varepsilon}{\sigma}.

This ratio indicates when displacement current can be neglected relative to conduction current under these material assumptions. Good conductors at sufficiently low frequencies are often conduction-dominated, whereas insulating materials and high-frequency systems commonly require both contributions.

In dispersive materials, polarization depends on the field’s history rather than only its instantaneous value. Frequency-domain descriptions then use a frequency-dependent, generally complex permittivity. A loss term may incorporate conduction as well as polarization losses, depending on convention; these contributions must not be counted twice.

These distinctions are important in alternating-current circuits, dielectric characterization, radio-frequency engineering, and the calculation of electrical impedance.

Historical development and interpretation

Maxwell introduced the displacement-current concept in his electromagnetic work of 1861–1862 and incorporated it into his broader theory in the 1860s. His original account connected electric displacement with mechanical models of a medium. The modern formulation retains the field equations without requiring such a mechanical interpretation.

The word displacement thus has a historical meaning; it does not refer to matter flowing through a vacuum. Nor is displacement current a separate fluid or an additional class of charge carrier. It is a field term, together with a material polarization contribution in the macroscopic description, that enters electromagnetic dynamics alongside ordinary charge currents.