Dalton’s law states that the total pressure exerted by a mixture of nonreacting ideal gases equals the sum of the pressures that each constituent gas would exert alone at the mixture’s temperature and volume. Named after John Dalton, who formulated it in the early nineteenth century, the law is exact for an ideal gas mixture and often provides a useful approximation for real gases at sufficiently low density.
Mathematical statement
For a mixture containing gaseous components,
where is the total absolute pressure and is the partial pressure of component .
In the ideal-gas interpretation, each partial pressure is
where is the amount of substance of that component, is the gas constant, is absolute temperature, and is the volume occupied by the entire mixture. Each gas occupies the full accessible volume; the components are not assigned separate physical portions of the container.
Because the total amount is ,
Defining the mole fraction of component as gives the frequently used form
Thus, in an ideal mixture, a gas’s fraction of the total pressure equals its fraction of the total number of molecules. It does not generally equal its fraction of the mixture’s mass, because different gases have different molar masses.
All pressures must use a consistent unit and an absolute, rather than gauge, reference. Absolute temperature is expressed in kelvins.
Molecular explanation
Gas pressure results from the transfer of momentum as molecules strike a container’s walls. In the ideal-gas model, molecules have negligible volume and exert no intermolecular forces except during elastic collisions. The momentum transferred by the different molecular species therefore contributes additively to the total pressure.
For a classical ideal gas at thermal equilibrium, kinetic theory gives
where is the number of molecules of species , is the mass of one molecule, and is its mean squared speed. The equipartition theorem gives
so
with the Boltzmann constant.
Consequently, equal numbers of different ideal-gas molecules at the same temperature and volume exert equal pressures, regardless of their molecular masses. Lighter molecules move faster on average, compensating for their smaller momentum at a given speed.
Applications
Gas composition and atmospheric pressure
Dalton’s law converts gas composition into component pressures. For example, an ideal mixture containing mol of nitrogen and mol of oxygen at a total pressure of has
The same calculation is widely used for the Earth’s atmosphere. Dry air contains approximately oxygen by mole fraction, so at , its oxygen partial pressure is about . Humidity changes the wet-air mole fractions: water vapor contributes its own partial pressure and reduces the fraction attributable to each dry-air component at a fixed total pressure.
Gas collected over water
A gas collected above liquid water usually contains water vapor. If the gas phase is saturated with water vapor and behaves approximately ideally,
and therefore
The water-vapor pressure must correspond to the actual temperature. For example, saturated water vapor at has a pressure of approximately . A saturated gas sample at that temperature and a total pressure of therefore has a dry-gas pressure of approximately .
This correction is used in laboratory stoichiometric calculations. If the liquid levels inside and outside a collection vessel differ, the resulting hydrostatic pressure difference must also be accounted for. Unsaturated gas requires its actual water-vapor pressure rather than the saturation value.
Gas-phase equilibrium
Partial pressures are important in chemical equilibrium. For an ideal-gas component, the chemical potential is
where is the standard pressure and is the corresponding standard chemical potential. Dalton’s law supplies the connection between mixture composition, total pressure, and the partial pressures used in equilibrium calculations.
Conditions and limitations
The ideal-gas assumptions become less accurate when molecular size and intermolecular interactions matter. Deviations are commonly important at high pressures, low temperatures, and near condensation or a critical point. Their magnitude depends on the substances and composition, not on pressure alone.
For real mixtures, partial pressure is commonly defined as . With that definition, follows automatically because the mole fractions sum to one. The substantive ideal-gas prediction is that this quantity also equals the pressure the isolated component would exert at the same temperature and total volume. That identification generally fails for real gases.
Real-mixture calculations therefore use an appropriate equation of state. In thermodynamic equilibrium calculations, fugacity replaces partial pressure as the effective pressure-like quantity:
where is the component fugacity coefficient. In the ideal-gas limit, , so . Fugacities do not generally sum to the total pressure.
A chemical reaction can change the amounts and identities of the gases present. Dalton’s law may still describe the resulting gas mixture if it behaves ideally, but the partial pressures must be calculated from the composition after reaction, not simply from the initial amounts.
Dalton’s law also does not determine how much gas dissolves in a liquid. Under suitable dilute-solution conditions, that relationship is described by Henry’s law, which connects a gas’s equilibrium partial pressure with its dissolved concentration.