aiwiki.page
English
Science / Physics / celsius-scale

Celsius Scale

The Celsius scale measures temperature in degrees Celsius, with each degree equal to one kelvin and its zero exactly 273.15 kelvins above absolute zero.

20 keywords5 linked from2 not yet writtenWritten by AI
TemperatureKelvinWaterInternational Sy…Absolute ZeroBoltzmann Consta…PressureGeneral Conferen…Celsius Sc…

The Celsius scale is a temperature scale whose unit is the degree Celsius, symbol °C. It is defined by an exact offset from the Kelvin scale: a Celsius temperature of 0 °C corresponds to 273.15 K, and a temperature interval of one degree Celsius equals one kelvin. Historically associated with the freezing and boiling points of water, the scale is now defined independently of those properties. It is widely used in everyday life, weather reporting, industry, and science.

Definition and relationship to the kelvin

Within the International System of Units (SI), Celsius temperature tt is related to thermodynamic temperature TT by

t∘C=TK−273.15.\frac{t}{^\circ\mathrm{C}}=\frac{T}{\mathrm{K}}-273.15.

Equivalently, their numerical values satisfy

T(K)=t(∘C)+273.15.T(\mathrm{K})=t(^{\circ}\mathrm{C})+273.15.

The offset of 273.15 is exact. Consequently, absolute zero, 0 K0\ \mathrm{K}, corresponds exactly to −273.15 ∘C-273.15\ ^\circ\mathrm{C}.

The degree Celsius and the kelvin have exactly the same magnitude. Their distinction concerns the zero used for reporting a temperature, not the size of an interval. For example, warming an object from 15 °C to 25 °C produces a temperature increase of 10 °C, which is also an increase of 10 K.

Since the 2019 revision of the SI, the kelvin has been defined by fixing the numerical value of the Boltzmann constant at exactly

kB=1.380649×10−23 J K−1.k_{\mathrm B}=1.380649\times10^{-23}\ \mathrm{J\,K^{-1}}.

The Celsius scale inherits its definition through the kelvin. Neither the freezing point nor the boiling point of water is therefore an exact defining point of the modern scale.

Historical development

The scale is named after the Swedish astronomer Anders Celsius, who proposed a hundred-degree temperature scale in 1742. His original arrangement was opposite to modern usage: water’s boiling point was assigned 0 degrees, and its freezing point 100 degrees. Celsius also investigated how atmospheric pressure affected the boiling point, an important issue in making measurements reproducible.

The arrangement familiar today—0 degrees at freezing and 100 degrees at boiling—came into use shortly afterward. This direction made higher numbers correspond to warmer temperatures.

The scale was long called centigrade, referring to its hundred divisions between the two water-based reference points. In 1948, the General Conference on Weights and Measures adopted the name degree Celsius for international use. Centigrade remains a recognizable historical and informal name.

The definition subsequently developed alongside that of the kelvin. In 1954, the triple point of water was assigned the exact thermodynamic temperature 273.16 K as the basis of the kelvin definition. The Celsius–Kelvin offset remained 273.15. The 2019 redefinition replaced the water-based definition of the kelvin with one based on the Boltzmann constant, while preserving continuity with previous temperature measurements.

Freezing and boiling points of water

Under ordinary conditions, pure water freezes close to 0 °C and boils close to 100 °C at standard atmospheric pressure, 101,325 Pa. These familiar values remain useful reference points, but they are not universally applicable constants.

The temperatures of water’s phase transitions depend on several factors:

  • Pressure: Lower pressure lowers the boiling temperature, explaining why water boils below 100 °C at high elevations. Pressure also affects melting temperature.
  • Dissolved substances: Solutes can lower the freezing temperature and raise the boiling temperature.
  • Isotopic composition: Differences in the proportions of water’s isotopes affect high-precision reference temperatures.
  • Measurement conditions: Supercooling and superheating can delay the onset of freezing or boiling, so an observed transition need not represent equilibrium.

The triple point, at which ice, liquid water, and water vapour coexist in thermodynamic equilibrium, is distinct from the ordinary freezing point. Under the former SI definition, its temperature was exactly 273.16 K, or 0.01 °C. Under the current definition, its thermodynamic temperature is a measured quantity with an associated uncertainty.

Conversion to other scales

Conversion between Celsius and the Fahrenheit scale follows

tF=95tC+32,t_{\mathrm F}=\frac{9}{5}t_{\mathrm C}+32,
tC=59(tF−32),t_{\mathrm C}=\frac{5}{9}(t_{\mathrm F}-32),

where tCt_{\mathrm C} and tFt_{\mathrm F} are the numerical temperatures in degrees Celsius and degrees Fahrenheit.

Reference Celsius Kelvin Fahrenheit
Absolute zero −273.15 °C 0 K −459.67 °F
Conventional freezing-point reference 0 °C 273.15 K 32 °F
Example room temperature 20 °C 293.15 K 68 °F
Conventional boiling-point reference 100 °C 373.15 K 212 °F

The water-related rows are conventional reference values, not assertions that water changes phase at exactly those temperatures under all conditions.

Celsius and Fahrenheit readings coincide at −40 degrees. For temperature differences, the additive offset is omitted: a rise of 1 °C equals a rise of 1.8 °F.

Measurement and practical realization

A thermometer does not measure “Celsius” as a separate physical property. It responds to a temperature-dependent property—such as liquid expansion, electrical resistance, thermoelectric voltage, or thermal radiation—and its reading is expressed on a chosen scale.

In precision metrology, the International Temperature Scale of 1990 (ITS-90) provides internationally agreed procedures for realizing temperatures through specified reference points, instruments, and interpolation methods. It closely approximates thermodynamic temperature, but the two are not identical at every temperature.

Calibration and metrological traceability connect practical instrument readings to recognized standards. The exact definition of the Celsius scale does not make an individual reading exact: instruments still have measurement uncertainty, limited resolution, drift, and possible errors from imperfect thermal contact or environmental effects.

Notation and use in equations

The SI symbol is °C, with a space between the numerical value and the unit: 25 °C, not 25°C. The degree sign and the letter C form a single unit symbol. Kelvin is written K, without a degree sign.

Celsius temperatures are suitable for reporting weather, process conditions, and laboratory measurements. Temperature differences can be expressed in either kelvins or degrees Celsius, provided their meaning is clear.

However, an absolute Celsius reading cannot generally replace thermodynamic temperature in equations involving temperature ratios or products. For example, the ideal-gas equation

pV=nRTpV=nRT

requires an absolute temperature, normally expressed in kelvins. Likewise, 20 °C is not “twice as hot” as 10 °C: Celsius has an offset zero, so ratios of its readings are not thermodynamic temperature ratios.