A cathode is an electrode defined by its role in an electrical or electrochemical device, rather than by an invariably positive or negative charge. In electrochemistry, it is the electrode at which reduction occurs: a chemical species accepts electrons. In vacuum tubes and gas-discharge devices, the cathode supplies electrons to the space between electrodes. In semiconductor devices, it is a designated terminal whose function depends on the device structure. The complementary electrode or terminal is the anode.
Electrochemical definition
An electrochemical cathode is the site of the reduction half-reaction of a oxidation–reduction reaction. Reduction involves a gain of electrons and a decrease in the oxidation state of the species being reduced.
For example, copper ions can accept electrons and become metallic copper:
The cathode provides the conducting surface through which electrons reach the reacting species. It need not itself be consumed or chemically transformed. Copper may deposit on a copper cathode, while other reactions occur on relatively inert conducting surfaces such as platinum or graphite.
At an electrode–electrolyte interface, electronic conduction in the electrode is coupled to ionic conduction in the electrolyte. Electrons ordinarily travel through the external metallic circuit, while ions carry charge through the electrolyte. It is therefore misleading to picture free electrons moving through the bulk electrolyte from one electrode to the other.
The defining distinction is:
- Cathode: reduction occurs.
- Anode: oxidation occurs.
This distinction applies regardless of whether the device supplies electrical energy or consumes it.
Polarity and direction of current
The cathode’s polarity depends on how an electrochemical cell operates.
| Operating mode | Energy conversion | Cathode polarity |
|---|---|---|
| Galvanic cell, including a discharging battery | Chemical energy supplies electrical energy | Positive relative to the anode |
| Electrolytic cell, including a battery undergoing charging | An external source drives a chemical reaction | Negative relative to the anode |
In a galvanic cell, a spontaneous reaction drives electrons through the external circuit from anode to cathode. The cathode is the positive electrode, despite receiving electrons. Its polarity reflects the difference in electric potential between the electrodes, not whether electrons are being received or released in a reaction.
In electrolysis, an external power supply delivers electrons to the cathode, making it negative relative to the anode. Those electrons enable reduction reactions that form part of the externally driven cell process.
Conventional electric current is defined in the direction of positive-charge motion, opposite to electron motion in a metal. During sustained electrochemical operation, conventional current passes from the electrolyte into the cathode and leaves it through its external electrical connection.
Positive ions often move toward a cathode under an applied electric field, but “the electrode that attracts positive ions” is not a sufficient definition. Cathodic reactions can consume neutral molecules, such as dissolved oxygen, and ionic transport also depends on concentration gradients and fluid motion.
Cathodes in batteries
During discharge, a battery’s cathode accepts electrons arriving through the external circuit. Its active material undergoes reduction, while oxidation at the anode supplies the electrons.
For a zinc–copper galvanic cell, the reactions are:
In rechargeable batteries, the reactions reverse during charging. Under the strict reaction-based definition, the physical electrode that was the cathode during discharge becomes the anode during charging.
Battery engineering nevertheless commonly retains the names cathode and anode according to their discharge roles. Thus, the “cathode material” of a lithium-ion battery usually means the positive-electrode active material, even when that material is undergoing oxidation during charging. “Positive electrode” and “negative electrode” are often clearer terms when discussing both operating modes.
A practical cathode is frequently a composite structure containing:
- An active material that participates in the electrochemical reaction.
- Conductive additives that provide electronic pathways.
- A binder that maintains mechanical integrity.
- A current collector that connects the electrode to the external circuit.
Lithium-ion positive-electrode materials include layered transition-metal oxides and lithium iron phosphate. Their performance depends on reversible ion insertion and removal, electronic and ionic conductivity, structural stability, and compatibility with the electrolyte.
Electrolysis, fuel cells, and corrosion control
Electrolysis and metal deposition
Cathodic reduction is central to electroplating, metal refining, and metal extraction. Metal ions accept electrons and deposit on a conducting surface. The amount deposited is related to the charge passed by Faraday’s laws of electrolysis:
where is deposited mass, is molar mass, is the charge used in the deposition reaction, is the number of electrons transferred per deposited atom or formula unit, and is the Faraday constant. If competing reactions consume part of the total charge, the deposition yield is lower than a calculation that assigns all charge to metal deposition.
During water electrolysis, the cathode produces hydrogen. In acidic conditions, the half-reaction is
In alkaline conditions, it can be written as
Fuel cells
In many fuel cells, oxygen is reduced at the cathode. For an acidic electrolyte, a representative reaction is
The cathode must provide pathways for electrons, ions, and reactant gases while allowing products to leave. Its performance therefore depends on electrode porosity, water management, and catalytic activity, as well as the properties of its active material.
Corrosion protection
Cathodic protection suppresses corrosion by making a metal structure the cathode of an electrochemical system. Electrons are supplied either by a more readily oxidized sacrificial anode or by an external direct-current source. Cathodic reactions then occur on the protected structure, reducing its tendency to undergo anodic metal dissolution.
Cathodes in electronic devices
Vacuum tubes and electron sources
In a vacuum tube, the cathode emits electrons that move toward a more positive anode. A heated cathode releases electrons through thermionic emission. It may be directly heated by current through the emitting element, or indirectly heated by a separate heater.
Other electron sources use different mechanisms. A photocathode emits electrons through the photoelectric effect, while a field-emission cathode emits electrons under a strong local electric field through quantum tunneling. These mechanisms do not require an electrochemical reduction reaction.
Electron-emitting cathodes are used in electron guns, vacuum electronic devices, and many X-ray tubes.
Gas discharges
In gas-discharge devices, the cathode supplies electrons that help sustain a conducting plasma. Depending on the device, electron emission may result from heating, ion bombardment, or other surface processes. Positive ions striking the cathode can also eject atoms from its surface, a process called sputtering that is used in thin-film deposition.
Semiconductor devices
In a semiconductor diode, cathode and anode are fixed terminal names. For an ordinary p–n junction diode, the cathode is connected to the n-type region. Under forward bias, conventional current flows through the device from anode to cathode.
These terminal names do not reverse when the applied voltage reverses. A reverse-biased diode still has the same cathode, even when little current flows or when breakdown permits substantial reverse current.
Performance and limitations
A cathode’s behavior is not determined by its equilibrium potential alone. In electrochemical systems, the Nernst equation relates equilibrium electrode potential to temperature and reactant and product activities, but operating electrodes also experience kinetic and transport losses.
Important limitations include:
- Charge-transfer kinetics: interfacial reactions may require an additional driving voltage, called overpotential.
- Mass transport: reactants must reach the surface through diffusion, migration, or convection.
- Electrical resistance: electrodes, electrolytes, and contacts produce voltage losses.
- Surface changes: deposits, contamination, or reaction films can alter available reaction sites.
- Mechanical and chemical degradation: repeated cycling, corrosion, or structural changes can reduce useful life.
For electron-emitting cathodes, important constraints instead include emission efficiency, surface work function, operating temperature, resistance to contamination, and erosion.
Terminology and history
The term cathode entered electrochemical terminology in 1834 through Michael Faraday, following terminology proposed by William Whewell. It derives from Greek words associated with a downward way or descent and was paired with anode.
The later extension of these terms to vacuum electronics and semiconductors produced related but distinct conventions. In electrochemistry, reaction direction determines the cathode; in many electronic components, construction and terminal designation determine it. Consequently, identifying a cathode requires knowing the device type and, for electrochemical systems, its operating mode.