An anode is an electrode through which conventional electric current enters a device or electrochemical system. In electrochemistry, it is the electrode at which oxidation occurs: a reacting species loses electrons. Its counterpart is the cathode, where reduction occurs. An anode is not necessarily positive: its polarity depends on whether the device generates electrical energy or consumes it. The term also applies to terminals in semiconductor devices and to electrodes in vacuum tubes and gas-discharge devices, where an oxidation reaction need not be involved.
Definition and current direction
Conventional current is defined in the direction in which positive electric charge would move. In a metallic conductor, electrons move in the opposite direction. Consequently, when an electrochemical anode releases electrons into an external wire, conventional current flows from that wire into the anode.
The defining electrochemical process is oxidation, one half of a oxidation–reduction reaction. For a metal that dissolves as positively charged ions, an anodic half-reaction can be written as
Here, is the number of electrons transferred per metal atom. The electrons enter the electronically conducting electrode and pass through the external circuit, while the metal ions enter the electrolyte.
An electrode need not itself be consumed to act as an anode. It may instead provide a conducting surface on which dissolved species, gases, or other materials are oxidized. Thus, anode identifies an electrical or electrochemical role, not a particular substance.
Polarity in electrochemical cells
The relationship between anode and polarity differs between a cell delivering electrical power and one driven by an external power supply.
| Operating mode | Anode process | Anode polarity relative to the cathode |
|---|---|---|
| Galvanic cell delivering power | Oxidation | Negative |
| Electrolytic cell driven by a power supply | Oxidation | Positive |
Galvanic operation
In a galvanic electrochemical cell, a spontaneous chemical reaction supplies electrical energy to an external circuit. The anode is the negative electrode.
For example, in a zinc–copper cell, zinc undergoes oxidation:
Electrons flow through the external circuit from the zinc anode to the copper cathode, where copper ions are reduced:
The external electron flow is therefore from anode to cathode, while conventional current flows in the opposite direction. Within the electrolyte, charge is carried by ions rather than by free electrons moving through the solution.
Electrolytic operation
In electrolysis, an external power supply drives a chemical transformation. The anode is connected to the supply’s positive terminal, which withdraws electrons from it.
During water electrolysis under acidic conditions, the anodic reaction is
Under alkaline conditions, the same overall oxygen-evolution process is commonly written as
Which reaction actually occurs depends on the electrolyte, electrode material, applied potential, and reaction rates. For example, chloride-containing electrolytes may support chlorine evolution as a competing anodic process.
Rechargeable batteries
A rechargeable battery reverses its principal electrode reactions between discharge and charge. Under the reaction-based definition, the electrode acting as the anode during discharge becomes the cathode during charging.
Battery literature nevertheless commonly retains the labels anode and cathode according to their discharge functions. In a conventional lithium-ion cell, the graphite-based negative electrode is therefore usually called the anode even during charging, when reduction occurs there. The terms positive electrode and negative electrode avoid this operating-mode ambiguity.
Electrode potential and reaction rate
An electrode’s electric potential alone does not determine whether it is an anode. Its role depends on the reaction occurring and the direction of current. At equilibrium, oxidation and reduction can occur at equal rates at an interface, but there is no net reaction current.
The Nernst equation relates an equilibrium electrode potential to temperature and the activities of the reacting species. When net current flows, an electrode generally operates away from its equilibrium potential. The difference is called overpotential and reflects the driving force needed to sustain the reaction at a particular rate.
Anodic performance depends on several interacting factors:
- Reaction kinetics: electron-transfer and surface-reaction rates determine how readily oxidation proceeds.
- Mass transport: reactants must reach the surface and products must leave it, through diffusion, convection, and ionic migration.
- Electrical conduction: resistance in the electrode and electrolyte produces voltage losses.
- Surface condition: oxides, adsorbed species, deposits, and gas bubbles can change the accessible reaction area.
A surface oxide may suppress dissolution through passivation, but it may also increase resistance or inhibit a desired reaction. Electrode selection therefore depends on both chemical stability and the required electrochemical activity.
Materials and applications
Consumable and relatively inert anodes
A consumable anode participates directly in the oxidation reaction. In copper electrorefining, an impure copper anode dissolves while copper is deposited at the cathode. Soluble metal anodes can also replenish metal ions during electroplating.
An inert anode primarily provides an electronically conducting reaction surface. Platinum, graphite, and coated titanium are used in different electrolytic environments. “Inert” is relative to the operating conditions: materials that are stable in one electrolyte may corrode, oxidize, or lose their coating in another.
In industrial aluminium production, carbon anodes are consumed as oxygen-containing species derived from alumina react with the carbon, producing predominantly carbon dioxide. This consumption is an important distinction from an ideal non-consumable oxygen-evolving anode.
Corrosion protection
In corrosion, anodic regions are locations where metal oxidation occurs. Anodic and cathodic regions may exist on the same metal object, connected through the metal and a surrounding electrolyte.
A sacrificial anode, commonly made from a suitable zinc, magnesium, or aluminium alloy, is electrically connected to a structure such as a ship’s hull or buried pipeline. The sacrificial material preferentially oxidizes, making the protected structure predominantly cathodic. This is a form of cathodic protection.
Impressed-current protection instead uses an external power supply and an anode designed to carry the required current with a suitable service life.
Anodes in electronic devices
Vacuum tubes and X-ray tubes
In a vacuum tube, the anode—often called the plate—collects electrons emitted by the cathode. During normal electron-collecting operation, it is positive relative to the cathode. Electron collection, rather than chemical oxidation, is the relevant process.
In an X-ray tube, accelerated electrons strike an anode target. Their interactions with the target generate X-rays, while most of their kinetic energy becomes heat. Anode material, cooling, and target geometry are therefore central design considerations.
Semiconductor devices
In a diode, the anode and cathode are fixed terminal names. Under ordinary forward bias, conventional current flows from anode to cathode. In a basic p–n junction diode, the anode is associated with the p-type side of the semiconductor junction.
Reverse leakage or breakdown can produce current in the opposite direction without changing the terminal names. Thus, electronic usage does not always identify the anode by the instantaneous direction of current, and the electrochemical rule “oxidation occurs at the anode” does not apply to every device bearing an anode terminal.
Terminology and history
Michael Faraday introduced anode and cathode into electrochemical terminology in 1834, following consultation with William Whewell. The terms were intended to describe electrode roles without making them permanently dependent on positive or negative polarity.
The Greek-derived word anode is associated with an upward way or ascent. Its modern technical meaning is established by electrical and electrochemical conventions rather than by a literal direction in space.