Carnot’s theorem is a fundamental result of thermodynamics stating that no cyclic heat engine operating between two thermal reservoirs can be more efficient than a reversible engine operating between the same reservoirs, and that all such reversible engines have the same efficiency. For reservoirs at absolute temperatures , this maximum efficiency is . The theorem follows from the second law of thermodynamics and sets a limit independent of the engine’s working substance or mechanical design.
Statement and scope
A thermal reservoir is an idealized body that can supply or absorb heat without changing its temperature. Consider an engine that completes a cycle while:
- absorbing heat from a hot reservoir;
- rejecting heat to a cold reservoir;
- delivering net work .
Because the engine returns to its initial state, its internal energy has no net change. The first law of thermodynamics therefore gives
Its thermal efficiency is
Carnot’s theorem has two connected parts:
- Maximum-efficiency principle: no engine operating between two specified reservoirs can exceed the efficiency of a reversible engine operating between them.
- Universality of reversible efficiency: every reversible engine operating between those reservoirs has the same efficiency, irrespective of its working substance or cycle details.
A reversible process is an ideal process that can be reversed while restoring both the system and its surroundings to their initial states. Reversibility requires the absence of dissipative effects and of heat transfer across finite temperature differences.
The theorem concerns cyclic devices whose only net effects are heat exchange with the two reservoirs and work exchange with their surroundings. Devices that also consume fuel, draw down a battery, or otherwise change an additional resource require a broader accounting.
Efficiency limit
On the absolute thermodynamic temperature scale, reversible heat exchanges satisfy
The maximum efficiency is consequently
Temperatures must be expressed on an absolute scale, conventionally in kelvin, not in degrees Celsius or Fahrenheit.
For example, an engine operating between reservoirs at and has a maximum efficiency of
For every absorbed from the hot reservoir, a reversible engine could deliver of work while rejecting to the cold reservoir. An irreversible engine operating under the same conditions would deliver less work for the same heat input.
The result shows that available heat is not interchangeable with an equal amount of work. Its potential for conversion into work depends on the temperature at which it is supplied relative to the temperature of the surroundings.
Proof from the second law
Suppose an engine were more efficient than a reversible engine operating between the same reservoirs. Scale their operation so that each, when run forward, absorbs the same quantity from the hot reservoir. The assumed efficiency difference means
Run forward and backward, using part of ’s work output to drive the reversed engine. Because is reversible, its backward operation returns to the hot reservoir. The hot reservoir therefore experiences no net heat exchange.
The combined device produces net work . Its only other net effect is to remove an equal amount of heat from the cold reservoir. It would thus convert heat drawn from a single reservoir entirely into work, with no other change. This contradicts the Kelvin–Planck statement of the second law.
No engine can therefore outperform a reversible engine between the same reservoirs.
Now suppose two reversible engines had unequal efficiencies. The less efficient one could be run backward while the more efficient one ran forward, producing the same contradiction. Their efficiencies must therefore be equal.
This argument establishes universality without assuming any particular gas, piston arrangement, or equation of state. The expression in terms of absolute temperatures follows when a thermodynamic temperature scale is introduced.
Entropy formulation
The theorem can also be expressed using entropy. Since the working substance returns to its initial state after each cycle, its net entropy change is zero. The reservoirs’ entropy changes are
For the complete engine–reservoir arrangement, the entropy generated per cycle is
Rearranging gives
Thus:
- gives the reversible, Carnot efficiency.
- gives an efficiency strictly below the Carnot limit.
This formulation quantifies the efficiency penalty associated with irreversibility. Sources include friction, viscous dissipation, uncontrolled expansion, mixing, and heat transfer across finite temperature differences. Removing mechanical friction alone is therefore insufficient to make an engine reversible.
Relation to the Carnot cycle
The Carnot cycle is a particular reversible cycle that attains the theorem’s bound in an idealized model. It consists of:
- reversible isothermal expansion at , during which heat is absorbed;
- reversible adiabatic expansion, lowering the working substance’s temperature to ;
- reversible isothermal compression at , during which heat is rejected;
- reversible adiabatic compression, restoring the initial state.
An adiabatic process involves no heat transfer. In the Carnot cycle, the adiabatic stages are also reversible and therefore have constant entropy.
An ideal gas provides a convenient model for calculating this cycle, but neither the cycle’s limiting efficiency nor Carnot’s theorem depends on ideal-gas behavior.
The theorem is broader than this four-stage construction. Any fully reversible engine whose only external heat exchanges are with the same two reservoirs has the same efficiency. Some alternative reversible cycles require ideal regeneration: heat is stored internally during one stage and returned during another, without introducing an additional external heat source or sink.
Historical development
Sadi Carnot presented the central argument in his 1824 work Reflections on the Motive Power of Fire, motivated by the performance of steam engines. He recognized that the maximum motive power obtainable from heat depended on the temperatures between which an engine operated, rather than on the particular working substance.
Carnot’s published analysis used the caloric theory, which treated heat as a conserved substance. That premise was later displaced by the recognition that heat and work are modes of energy transfer. His comparison of reversible engines nevertheless supplied a foundation for the modern theorem.
Émile Clapeyron reformulated Carnot’s reasoning mathematically in 1834. During the nineteenth century, Rudolf Clausius and William Thomson, later Lord Kelvin, helped reconcile the result with energy conservation and develop its modern second-law interpretation. The universality of reversible-engine performance also underpinned the construction of an absolute thermodynamic temperature scale independent of the properties of a particular thermometer material.
Applications and limitations
Engineering benchmarks
Carnot efficiency is a reference limit for steam power plants, gas-turbine systems, and other heat engines. Raising the hot-reservoir temperature or lowering the cold-reservoir temperature increases this theoretical limit.
Actual performance is also constrained by material properties, heat-transfer rates, pressure losses, and irreversibility. Heat addition and rejection in practical plants often occur over temperature ranges rather than at two fixed temperatures. Their measured efficiencies therefore require careful interpretation when compared with a two-reservoir Carnot bound.
Refrigeration and heat pumps
A reversible engine operated backward gives corresponding upper bounds for refrigerators and heat pumps. Their performance is measured by coefficients of performance rather than by heat-engine efficiency:
These quantities can exceed one because the work input moves heat rather than merely being converted into delivered heat.
Finite reservoirs and finite power
If a source cools or a sink warms during operation, the reservoir temperatures are not constant. The fixed-temperature formula cannot then be applied to the entire process using only the initial temperatures; a reversible analysis must account for the changing temperatures.
Carnot efficiency also specifies an efficiency limit, not a maximum power output. With ordinary finite-conductance heat exchangers, approaching reversible heat transfer requires temperature differences to approach zero, reducing heat-transfer rates. Practical engine design therefore distinguishes maximum efficiency from maximum power.
Apparent exceptions
A claimed efficiency above the Carnot limit generally requires examination of the system boundary, temperature definitions, and additional energy or entropy flows. An apparatus using chemical fuel, nonthermal energy sources, or reservoirs outside ordinary thermal equilibrium is not necessarily a two-thermal-reservoir engine of the kind covered by the theorem. Its performance cannot be assessed by inserting two selected temperatures into the Carnot formula alone.