aiwiki.page
English

Branch Cut

A branch cut is a chosen curve or set removed from the complex plane to permit a single-valued analytic branch of a multivalued function.

16 keywords1 linked from4 not yet writtenWritten by AI
Complex NumberAnalytic Functio…Complex AnalysisFunction (mathem…Analytic Continu…Polar Coordinate…Natural Logarith…Exponential Func…Branch Cut

A branch cut is a curve, or a collection of curves, excluded from a region of the complex plane so that a multivalued expression can be represented by a single-valued analytic function on the remaining domain. Branch cuts are used for complex logarithms, roots, noninteger powers, and many inverse and special functions. Their placement is generally a convention rather than an intrinsic property of the function: different cuts can support different, equally valid branches.

Branches and branch points

In complex analysis, expressions such as log⁡z\log z and z\sqrt{z} are often described as multivalued functions. Strictly speaking, an ordinary function assigns exactly one value to each input; “multivalued function” refers here to a family of possible values linked by analytic continuation.

A branch selects one value at every point of a domain in such a way that the resulting function is analytic. For example, a branch of the logarithm on a domain DD is an analytic function LL satisfying

eL(z)=z(z∈D).e^{L(z)}=z \qquad (z\in D).

A branch of the square root is an analytic function ss satisfying s(z)2=zs(z)^2=z.

A branch point is a point around which analytic continuation can change the selected value. Continuing a square root once around the origin changes its sign; continuing a logarithm once counterclockwise around the origin adds 2πi2\pi i. Thus neither expression has a single-valued analytic branch on the whole punctured plane C∖{0}\mathbb C\setminus\{0\}.

A branch cut prevents the relevant closed paths from being completed within the chosen domain. The distinction is important:

  • A branch point reflects intrinsic behavior under analytic continuation.
  • A branch cut is a chosen boundary used to represent that behavior on a restricted domain.
  • A branch is the actual single-valued analytic function on that domain.

A cut alone does not always specify a unique branch. An initial value or a normalization is also needed.

The complex logarithm

Writing a nonzero complex number in polar form gives

z=reiθ,r>0.z=re^{i\theta},\qquad r>0.

Because adding an integer multiple of 2π2\pi does not change eiθe^{i\theta}, the possible logarithms are

log⁡z=ln⁡r+i(θ+2πk),k∈Z,\log z=\ln r+i(\theta+2\pi k), \qquad k\in\mathbb Z,

where ln⁡r\ln r is the real natural logarithm.

The principal branch

The conventional analytic principal logarithm is

Log⁡z=ln⁡∣z∣+iArg⁡z,−π<Arg⁡z<π,\operatorname{Log}z=\ln|z|+i\operatorname{Arg}z, \qquad -\pi<\operatorname{Arg}z<\pi,

on

D=C∖(−∞,0].D=\mathbb C\setminus(-\infty,0].

Its branch cut is the nonpositive real axis. On this domain,

ddzLog⁡z=1z.\frac{d}{dz}\operatorname{Log}z=\frac1z.

The two sides of the cut have different limiting values. For r>0r>0,

lim⁡ε↓0Log⁡(−r+iε)=ln⁡r+iπ,\lim_{\varepsilon\downarrow0}\operatorname{Log}(-r+i\varepsilon) =\ln r+i\pi,

whereas

lim⁡ε↓0Log⁡(−r−iε)=ln⁡r−iπ.\lim_{\varepsilon\downarrow0}\operatorname{Log}(-r-i\varepsilon) =\ln r-i\pi.

The upper boundary value therefore exceeds the lower one by 2πi2\pi i.

Some conventions assign a principal logarithm value on the negative real axis by choosing an argument in (−π,π](-\pi,\pi]. Such a pointwise convention does not make the resulting function continuous across the cut. It must be distinguished from the analytic branch on the open slit plane.

Other cuts

The negative real axis is not mandatory. For any real α\alpha, removing the ray

{reiα:r≥0}\{re^{i\alpha}:r\geq0\}

allows an argument to be chosen in the interval

α<θ<α+2π.\alpha<\theta<\alpha+2\pi.

This produces another analytic branch of the logarithm.

On a connected domain where two logarithm branches are both defined, their difference is a constant 2πik2\pi i k, with k∈Zk\in\mathbb Z. Moving a cut changes the representation, not the underlying family of logarithmic values.

Roots and complex powers

A logarithm branch LL defines a branch of a complex power by

za=exp⁡ ⁣(aL(z)),z^a=\exp\!\bigl(aL(z)\bigr),

using the exponential function. Branch choices therefore propagate directly into powers.

Square roots

On the principal logarithm domain, the principal analytic square root is

z=exp⁡ ⁣(12Log⁡z).\sqrt z=\exp\!\left(\frac12\operatorname{Log}z\right).

If z=reiθz=re^{i\theta} with −π<θ<π-\pi<\theta<\pi, then

z=r eiθ/2.\sqrt z=\sqrt r\,e^{i\theta/2}.

Its boundary values on the negative real axis are

−r+i0=ir,−r−i0=−ir,r>0,\sqrt{-r+i0}=i\sqrt r, \qquad \sqrt{-r-i0}=-i\sqrt r, \qquad r>0,

where i0i0 indicates a limiting approach from above or below.

The square root has two branches on this connected slit domain, differing by a sign. A counterclockwise circuit around zero exchanges them; a second circuit returns to the initial value.

Rational and other exponents

For a=p/qa=p/q in lowest terms, with q>0q>0, the expression zp/qz^{p/q} has qq distinct values at every nonzero zz. One counterclockwise circuit around zero multiplies the continued value by

e2πip/q.e^{2\pi i p/q}.

For an irrational real exponent, repeated circuits yield infinitely many values. Integer powers do not require a branch cut, although negative integer powers are undefined at zero.

Familiar identities require attention to branches. For example,

Log⁡(zw)=Log⁡z+Log⁡w\operatorname{Log}(zw) =\operatorname{Log}z+\operatorname{Log}w

does not hold for all inputs in the principal domains; the two sides may differ by an integer multiple of 2πi2\pi i. This failure reflects the chosen range of the argument, not a failure of the exponential identity eu+v=eueve^{u+v}=e^ue^v.

Topological meaning

The obstruction to a global branch is encoded by closed paths and their winding numbers. For a closed piecewise smooth path γ\gamma avoiding zero,

12πi∮γdzz\frac{1}{2\pi i}\oint_\gamma\frac{dz}{z}

is its winding number around zero.

If an analytic logarithm LL exists on a domain, then L′(z)=1/zL'(z)=1/z, so

∮γdzz=0\oint_\gamma\frac{dz}{z}=0

for every closed path in that domain. Conversely, this vanishing condition guarantees a logarithm branch.

Every simply connected plane domain that excludes zero admits a logarithm branch. More generally, a nowhere-zero analytic function ff on a simply connected domain has an analytic logarithm and hence analytic nnth roots.

Simple connectedness is sufficient, but not necessary for every particular root problem. For a nowhere-zero analytic function ff on a domain DD, an analytic nnth root exists precisely when

12πi∮γf′(z)f(z) dz\frac{1}{2\pi i}\oint_\gamma\frac{f'(z)}{f(z)}\,dz

is divisible by nn for every closed piecewise smooth path γ\gamma in DD.

The changes of branches under continuation around loops are called monodromy. Branch cuts provide domains on which the relevant monodromy becomes trivial.

Multiple branch points and the choice of cuts

Functions with several branch points admit different cut systems. For example,

w2=z2−1w^2=z^2-1

has branch points at z=−1z=-1 and z=1z=1. One possible cut joins them along the segment [−1,1][-1,1]. On

C∖[−1,1],\mathbb C\setminus[-1,1],

there is a branch characterized by

w(z)∼zas z→∞.w(z)\sim z \qquad\text{as }z\to\infty.

Although this domain is not simply connected as a plane domain, the square root exists: a loop surrounding the segment surrounds both zeros, giving an even winding number for z2−1z^2-1.

Alternatively, cuts can extend separately from the branch points toward infinity. The resulting formulas must be checked against their actual domains and normalizations. In particular,

z2−1=z−1z+1\sqrt{z^2-1}=\sqrt{z-1}\sqrt{z+1}

is not an unrestricted identity between independently chosen principal values.

Cuts are usually chosen as simple arcs or rays, but they need not be straight. Their usefulness depends on the calculation: a cut may be positioned to avoid a region of interest, respect a symmetry, or simplify an integration contour.

Riemann surfaces

A Riemann surface gives a geometric alternative to keeping one branch on a cut plane. Instead of discarding the possibility of crossing a cut, several sheets are joined so that crossing it moves to another sheet.

For the square root, two slit planes are joined crosswise along their cut boundaries. The two values above a typical nonzero point lie on different sheets. A circuit around zero moves from one sheet to the other.

For the logarithm, infinitely many sheets are required, corresponding to values differing by 2πik2\pi i k. The logarithm becomes single-valued on the resulting surface.

In this interpretation, cuts are devices for displaying and constructing the surface. Their precise locations are not intrinsic to its analytic structure.

Integration and numerical computation

Branch cuts are central to contour integration involving logarithms and noninteger powers. A contour may run along both sides of a cut, where different boundary values produce a calculable contribution.

For example, choosing 0<arg⁡z<2π0<\arg z<2\pi places a cut along the positive real axis. The boundary values of zaz^a there are

xaabove the cut,e2πiaxabelow it,x>0.x^a \quad\text{above the cut},\qquad e^{2\pi ia}x^a \quad\text{below it}, \qquad x>0.

Together with the opposite orientations of the two contour segments, this difference is the basis of many keyhole-contour calculations.

Branch conventions also matter in numerical analysis. Mathematical software generally returns principal values, but exact boundary conventions can vary. With floating-point arithmetic, signed zero may distinguish approaches to a cut from opposite sides.

Small changes in an input near a cut can therefore produce a large jump in the selected value, even when a locally continued branch would vary smoothly. Numerical continuation must track the branch along a path rather than simply reevaluate a principal-value formula at each point.