Bond dissociation energy (BDE) is a measure of the energy required to break a particular chemical bond in a specified chemical species by homolysis, so that each fragment receives one electron from the bond. In chemical thermodynamics, the term commonly refers to the enthalpy change for this process in the gas phase at a stated temperature, usually . A BDE characterizes a particular dissociation reaction, not merely a pair of bonded elements: two carbon–hydrogen bonds in different molecules can have substantially different dissociation energies.
Definition and thermodynamic basis
For a simple bond between groups A and B, homolytic dissociation is written
The dots denote unpaired electrons. The products are commonly radicals, although their precise electronic states depend on the species involved. The molar bond dissociation enthalpy at temperature is
Here, denotes a standard molar enthalpy. The standard state, temperature, physical phases, and identities and electronic states of the products must be specified for a precise value.
The usual unit is kilojoules per mole, . Kilocalories per mole are also common, especially in older and organic-chemical literature. For individual molecules, values may be expressed in electronvolts:
Breaking an ordinary stable bond into separated fragments requires energy. The reverse association reaction releases the corresponding enthalpy, provided that the initial and final states are exactly reversed.
Enthalpy versus internal energy
Although “energy” and “enthalpy” are often used interchangeably in discussions of bond strength, they are not identical. For an ideal-gas reaction,
where is the change in internal energy, is the change in the stoichiometric amount of gaseous species, and is the gas constant.
For the dissociation of one gas-phase molecule into two gas-phase fragments, . The enthalpy change therefore exceeds the internal-energy change by , about at . This distinction matters when comparing spectroscopic thresholds, calculated electronic energies, and thermochemical tables.
Dissociation energies at different reference levels
Several related quantities describe bond dissociation, but they use different energy reference levels.
Potential-well depth,
For a diatomic molecule, is the difference between the minimum of its electronic potential-energy curve and the energy of the separated fragments in specified electronic states. It excludes the vibrational energy present even in the molecule’s lowest vibrational state.
Ground-state dissociation energy,
The quantity is measured from the lowest vibrational level rather than from the bottom of the potential well. For a diatomic molecule dissociating into atoms,
where is the molecular zero-point vibrational energy.
For polyatomic molecules, the corresponding correction includes the zero-point energies of both the parent molecule and any molecular fragments. At zero temperature, and with matching state conventions, corresponds to the dissociation enthalpy.
Finite-temperature bond dissociation enthalpy
A BDE reported at includes thermal contributions from translation, rotation, vibration, and any thermally populated electronic states. It is therefore not generally identical to either or .
An isotopic substitution can change a measured dissociation energy through changes in vibrational energies, even when the underlying electronic potential is nearly unchanged.
Specific bond dissociation energies and average bond enthalpies
A specific BDE applies to one defined bond-breaking reaction. An average bond enthalpy, often called a mean bond energy, is an average over several bonds or molecular environments. The two should not be treated as interchangeable.
For example, removing the first hydrogen atom from methane gives a methyl radical:
Its bond dissociation enthalpy near room temperature is approximately . The subsequent removal of hydrogen atoms occurs from different species and has different enthalpy changes, even though the four C–H bonds in the original methane molecule are symmetry-equivalent.
The mean C–H bond enthalpy obtained by dividing methane’s total atomization enthalpy by four is approximately . It is an average over the entire atomization process, not the energy required to break the first C–H bond.
Likewise, the first O–H dissociation of gaseous water requires about , whereas dissociation of the resulting hydroxyl radical requires about . Their average is not the BDE of either individual step.
Factors controlling bond dissociation energy
A BDE measures the enthalpy difference between the parent species and the separated products. Any structural feature that stabilizes one side relative to the other can change it.
Bond order and orbital overlap. Multiple bonds generally have higher total dissociation energies than corresponding single bonds between the same elements, although a double bond is not simply twice as strong as a single bond. Orbital size, orientation, and overlap affect the strength of a covalent bond.
Stability of the fragments. Stabilization of a radical product tends to lower the BDE, other factors being comparable. In organic chemistry, allylic and benzylic C–H bonds are often weaker than ordinary alkyl C–H bonds because the resulting radicals can be stabilized by electron delocalization.
Electronic effects. Substituents can alter bonding and radical stability through inductive effects, conjugation, and interactions between neighboring orbitals. Simple rules based only on the identities of the bonded atoms are therefore insufficient.
Molecular strain and geometry. Dissociation may release strain or allow the fragments to adopt more favorable geometries. A thermochemical BDE normally includes relaxation of the products; it is not simply the energy required to stretch a bond while holding every other coordinate fixed.
Electronic state. Different spin or electronic states of the fragments define different dissociation limits. Comparisons are meaningful only when the relevant states are identified.
Determination
Thermochemical cycles
Bond dissociation enthalpies can be obtained from standard enthalpies of formation using Hess’s law:
This approach does not require direct observation of isolated bond rupture. Its accuracy depends on the thermochemical data, particularly those for short-lived radicals.
Spectroscopic and fragmentation methods
Spectroscopy can establish dissociation limits from molecular energy levels or photodissociation thresholds. Interpretation may require corrections for internal excitation, fragment electronic states, and barriers along the dissociation pathway.
Mass spectrometry can constrain dissociation energies through fragmentation measurements, often within thermochemical cycles. A measured fragment appearance threshold is not automatically a neutral-molecule BDE: ionization, competing fragmentation pathways, and instrumental timescales can affect the result.
Computational methods
Electronic-structure calculations determine the energy difference between a parent species and its fragments. Zero-point and thermal corrections then convert electronic dissociation energies into quantities comparable with experiment.
Methods include correlated wave-function approaches and density functional theory. Open-shell fragments, multiple electronic configurations, and stretched bonds can be challenging. Calculated values must therefore be assessed with attention to the electronic-structure method, basis set, and product states.
Applications
Estimating reaction enthalpies
Average bond enthalpies provide approximate reaction enthalpies:
Bond breaking contributes positively; bond formation contributes negatively. Such estimates are most useful for gas-phase reactions involving familiar bonding environments. Their accuracy is limited when generic average values replace molecule-specific data or when phase changes and intermolecular interactions are omitted.
Radical reactions and hydrogen-atom transfer
For hydrogen-atom transfer,
the reaction enthalpy can be estimated as
Formation of the stronger bond favors an exothermic reaction. This relationship is useful in studying combustion, oxidation, radical chain reactions, and polymer degradation.
Assessing molecular stability
BDEs help identify bonds that may undergo homolytic cleavage during heating, irradiation, or radical attack. They are useful inputs to reaction mechanisms and kinetic models, but they do not by themselves determine which pathway will dominate.
Limitations and related quantities
BDE is not activation energy. A dissociation enthalpy describes the difference between initial and final states; an activation energy concerns the barrier associated with a reaction pathway. Rates also depend on entropy, collisions, electronic-state restrictions, and competing reactions. A lower BDE does not universally imply a faster reaction.
Homolysis is not heterolysis. In heterolytic cleavage, both bonding electrons go to one fragment, producing oppositely charged species. Its energy depends strongly on charge stabilization and solvation and is distinct from a homolytic BDE.
Gas-phase values are not automatically solution values. A solvent may stabilize the parent and fragments differently. A solution-phase bond dissociation enthalpy must include these effects and specify the medium and standard-state convention.
Bond dissociation free energy is a different quantity. A bond dissociation free energy uses the Gibbs free-energy change rather than the enthalpy change:
It includes the entropy change and is the appropriate quantity for describing dissociation equilibria under specified conditions.
Bond strength is not a complete measure of chemical reactivity. Reactions may proceed through ionic, concerted, catalytic, or photochemical pathways rather than isolated homolysis. A bond with a high gas-phase BDE can participate readily in a reaction if the overall pathway is favorable and has an accessible barrier.