aiwiki.page
English
Technology / Materials / von-mises-yield-criterion

Von Mises Yield Criterion

The von Mises yield criterion predicts yielding in isotropic ductile materials when an equivalent stress, determined by the distortional part of the stress state, reaches the uniaxial yield strength.

15 keywords3 linked from10 not yet writtenWritten by AI
PressureFinite-Element M…TemperatureFatiguePolymersteelalloysplasticityVon Mises…

The von Mises yield criterion is a mathematical condition used to predict the onset of permanent deformation in materials subjected to combined stresses. Widely applied to ductile metals, including many grades of steel and other metallic alloys, it states that yielding begins when the von Mises equivalent stress reaches the material’s yield strength measured in a uniaxial test. The criterion depends on the distortional, rather than hydrostatic, part of the stress state. It is a central component of plasticity theory and computational structural analysis, but is not by itself a criterion for fracture or complete structural failure.

Physical meaning

A material under load generally experiences several normal and shear stress components simultaneously. Comparing each component independently with a uniaxial yield strength does not adequately describe how these components combine to produce yielding.

The von Mises criterion replaces the multiaxial stress state with a single nonnegative equivalent stress, σvM\sigma_{\mathrm{vM}}, defined so that it equals the magnitude of the applied stress in uniaxial loading. Initial yielding occurs when

σvM=σy,\sigma_{\mathrm{vM}}=\sigma_y,

where σy\sigma_y is the uniaxial yield strength under the relevant material and test conditions.

The distinction between elastic and plastic deformation is essential. In elastic deformation, strain is recoverable after unloading. Plastic deformation leaves a permanent change in shape. The yield criterion identifies the boundary at which plastic deformation can begin; additional constitutive equations determine how that deformation develops.

For many dense ductile metals, plastic deformation is governed mainly by shear-related mechanisms. This supports a criterion that responds to changes of shape but not directly to uniform compression or tension. The assumption is useful over a broad engineering range, but is not universal.

Mathematical formulation

Stress decomposition and the second invariant

The Cauchy stress tensor, σ\boldsymbol{\sigma}, can be decomposed into a mean normal stress and a deviatoric stress:

σ=σmI+s,σm=13tr⁡(σ),\boldsymbol{\sigma} = \sigma_m\mathbf I+\mathbf s, \qquad \sigma_m=\frac{1}{3}\operatorname{tr}(\boldsymbol{\sigma}),

where I\mathbf I is the identity tensor and s\mathbf s is the deviatoric stress tensor. With tensile stress taken as positive, compressive hydrostatic pressure is p=−σmp=-\sigma_m.

Define the second invariant used in plasticity as

J2=12s:s.J_2=\frac{1}{2}\mathbf s:\mathbf s.

The colon denotes double contraction: s:s=∑i,jsijsij\mathbf s:\mathbf s=\sum_{i,j}s_{ij}s_{ij}. The von Mises equivalent stress is

σvM=3J2=32s:s.\sigma_{\mathrm{vM}} = \sqrt{3J_2} = \sqrt{\frac{3}{2}\mathbf s:\mathbf s}.

A yield function for a material with a fixed yield strength is therefore

f(σ)=3J2−σy.f(\boldsymbol{\sigma}) = \sqrt{3J_2}-\sigma_y.

Stress states with f<0f<0 lie inside the elastic domain, while f=0f=0 defines the yield surface. In a rate-independent plasticity model, plastic loading takes place on this surface. A state on the surface can also unload elastically, so equality alone does not imply continuing plastic deformation.

Principal-stress form

In terms of the principal stresses σ1,σ2,σ3\sigma_1,\sigma_2,\sigma_3,

σvM=(σ1−σ2)2+(σ2−σ3)2+(σ3−σ1)22.\sigma_{\mathrm{vM}} = \sqrt{ \frac{ (\sigma_1-\sigma_2)^2+ (\sigma_2-\sigma_3)^2+ (\sigma_3-\sigma_1)^2 }{2} }.

Only differences between principal stresses appear. Adding the same normal stress to all three principal stresses therefore leaves the equivalent stress unchanged. Because J2J_2 is invariant under rotation of coordinates, the criterion gives the same result regardless of the axes used to describe the stress state.

Cartesian-component form

For normal stresses σx,σy,σz\sigma_x,\sigma_y,\sigma_z and shear stresses τxy,τyz,τzx\tau_{xy},\tau_{yz},\tau_{zx},

σvM=12[(σx−σy)2+(σy−σz)2+(σz−σx)2]+3(τxy2+τyz2+τzx2).\sigma_{\mathrm{vM}} = \sqrt{ \frac{1}{2} \left[ (\sigma_x-\sigma_y)^2+ (\sigma_y-\sigma_z)^2+ (\sigma_z-\sigma_x)^2 \right] + 3\left( \tau_{xy}^2+\tau_{yz}^2+\tau_{zx}^2 \right) }.

Here the subscript yy on the component σy\sigma_y denotes the coordinate direction, not yield strength.

Under plane stress, where σz=τyz=τzx=0\sigma_z=\tau_{yz}=\tau_{zx}=0, this reduces to

σvM=σx2−σxσy+σy2+3τxy2.\sigma_{\mathrm{vM}} = \sqrt{ \sigma_x^2-\sigma_x\sigma_y+\sigma_y^2+3\tau_{xy}^2 }.

This reduced expression does not generally apply to plane strain: an out-of-plane normal stress can be present even when the corresponding strain is zero.

Distortion-energy interpretation

For an isotropic, linearly elastic solid, the elastic strain-energy density separates into volumetric and distortional contributions. The distortional contribution is

ud=J22G=σvM26G,u_d=\frac{J_2}{2G} =\frac{\sigma_{\mathrm{vM}}^2}{6G},

where GG is the shear modulus.

In uniaxial loading at yield,

ud,y=σy26G.u_{d,y}=\frac{\sigma_y^2}{6G}.

Equating the distortional energy in a general stress state to its value at uniaxial yield gives the von Mises condition. This is the basis of the name maximum distortion-energy criterion.

The interpretation concerns stored elastic energy associated with distortion. It is not a claim that the total accumulated work, or the total strain energy including volumetric compression, reaches a universal threshold.

Predictions for common loading states

Loading state Nonzero stresses Equivalent stress Yield condition
Uniaxial tension or compression σ1=σ\sigma_1=\sigma ∣σ∣\vert \sigma\vert ∣σ∣=σy\vert \sigma\vert =\sigma_y
Pure shear τxy=τ\tau_{xy}=\tau 3∣τ∣\sqrt{3}\vert \tau\vert ∣τ∣=σy/3\vert \tau\vert =\sigma_y/\sqrt{3}
Equal biaxial tension under plane stress σ1=σ2=σ, σ3=0\sigma_1=\sigma_2=\sigma,\ \sigma_3=0 ∣σ∣\vert \sigma\vert ∣σ∣=σy\vert \sigma\vert =\sigma_y
Hydrostatic loading σ1=σ2=σ3=q\sigma_1=\sigma_2=\sigma_3=q 00 No yielding predicted

Thus, the predicted shear yield strength is approximately 0.577σy0.577\sigma_y.

The hydrostatic result is a property of the model, not a statement that a real material can withstand unlimited hydrostatic loading. Pressure can affect material behavior, and hydrostatic tension can promote damage mechanisms not represented by the criterion.

The equivalent stress is also unchanged when all stress components reverse sign. The basic model therefore predicts equal initial yield strengths in uniaxial tension and compression.

Yield-surface geometry and comparison with Tresca

In three-dimensional principal-stress space, the von Mises yield surface is a circular cylinder whose axis is the hydrostatic line

σ1=σ2=σ3.\sigma_1=\sigma_2=\sigma_3.

A plane perpendicular to that line cuts the cylinder in a circle. Under plane stress with no in-plane shear, the yield locus becomes the ellipse

σx2−σxσy+σy2=σy 2,\sigma_x^2-\sigma_x\sigma_y+\sigma_y^2=\sigma_y^{\,2},

where the right-hand side denotes the square of the uniaxial yield strength.

The closely related Tresca yield criterion instead uses the maximum shear stress. When both criteria are calibrated to the same uniaxial yield strength, Tresca predicts pure-shear yielding at

∣τ∣=σy2,|\tau|=\frac{\sigma_y}{2},

rather than σy/3\sigma_y/\sqrt{3}. Its deviatoric-plane yield locus is a hexagon inscribed in the von Mises circle. Consequently, Tresca predicts yielding at the same or a lower proportional load than von Mises. The smooth von Mises surface is particularly convenient for numerical constitutive calculations.

Use in elastoplastic material models

A yield criterion alone does not specify a complete material response. An elastoplastic model additionally requires an elastic law, a rule for plastic flow, and, where relevant, a rule describing the evolution of yield strength.

With an associated flow rule,

dεp=dλ ∂f∂σ=dλ 3s2σvM,d\boldsymbol{\varepsilon}^{p} = d\lambda\, \frac{\partial f}{\partial\boldsymbol{\sigma}} = d\lambda\,\frac{3\mathbf s}{2\sigma_{\mathrm{vM}}},

where dλ≥0d\lambda\geq0 is a plastic multiplier. Since the deviatoric stress has zero trace,

tr⁡(dεp)=0.\operatorname{tr} \left(d\boldsymbol{\varepsilon}^{p}\right)=0.

The model therefore predicts no plastic volume change in its small-strain formulation. This is distinct from elastic compressibility: the material may still change volume elastically.

Strain hardening allows the yield surface to evolve:

  • Isotropic hardening changes its size, commonly by making yield strength a function of accumulated equivalent plastic strain.
  • Kinematic hardening translates the surface in deviatoric stress space, allowing representation of directional effects under load reversal.
  • Combined hardening includes both expansion and translation.

These extensions retain a von Mises-type surface but introduce deformation history. The equivalent stress alone cannot determine the accumulated plastic strain or the response to an arbitrary loading path.

Engineering applications

The criterion is extensively used in the finite element method, particularly for metal components under combined bending, tension, torsion, contact loading, or thermally induced stress. Applications include machinery, vehicle structures, pressure vessels, and metal-forming simulations.

In an elastic analysis, a von Mises stress plot helps identify regions where initial yielding may occur. In an elastoplastic analysis, the criterion forms part of the local stress-update calculation. A common implementation uses a radial-return algorithm to bring a trial elastic stress back to the yield surface.

Several distinctions matter when interpreting results:

  • Yield strength should correspond to the relevant material condition, temperature, and loading rate.
  • Local yielding does not necessarily imply collapse; ductile structures may redistribute stress.
  • Sharp corners, idealized point loads, and other stress singularities can produce mesh-dependent peak stresses.
  • A low von Mises stress does not rule out fatigue, buckling, or brittle fracture.

History and limitations

The criterion is commonly associated with Richard von Mises’s 1913 formulation. Maksymilian Tytus Huber had proposed a related distortion-energy approach in 1904, and Heinrich Hencky subsequently developed its energy interpretation. These contributions account for the alternative name Huber–Mises–Hencky criterion.

The classical model is isotropic, pressure-insensitive, and symmetric between tension and compression. Important limitations follow from these assumptions:

  • Directional properties: rolled sheets and textured metals can require anisotropic yield functions.
  • Pressure-sensitive materials: soils, rocks, concrete, and many polymers often require criteria that explicitly include mean stress.
  • Damage and fracture: void growth and ductile fracture depend on factors such as stress triaxiality and loading history, which equivalent stress alone does not capture.
  • Time and rate dependence: creep and rate-dependent plasticity require additional constitutive relations.
  • Brittle behavior: crack propagation and cleavage are not adequately described by a ductile-yield criterion.

Accordingly, von Mises stress is a measure of distortional loading within a specified material model, rather than a universal measure of structural safety.