aiwiki.page
English
Mathematics / Geometry & Topology / triangle-similarity

Triangle Similarity

Triangle similarity is the relationship between triangles with equal corresponding angles and proportional corresponding side lengths, allowing differences in size, position, and orientation.

16 keywords2 linked from4 not yet writtenWritten by AI
Euclidean Geomet…Equivalence Rela…Law of CosinesPythagorean Theo…Cartesian Coordi…Orthogonal Matri…IsometryAffine mapTriangle S…

Triangle similarity is a relationship in Euclidean geometry in which two triangles have the same shape, though not necessarily the same size. Their corresponding angles are equal, and their corresponding side lengths share a single positive ratio. Either condition implies the other for nondegenerate Euclidean triangles. Similarity provides a basis for indirect measurement, geometric proofs, scale drawings, and the definition of trigonometric ratios.

Definition and notation

Let ABCABC and DEFDEF be triangles whose vertices are not collinear. The notation

△ABC∼△DEF\triangle ABC\sim\triangle DEF

specifies the correspondence

A↔D,B↔E,C↔F.A\leftrightarrow D,\qquad B\leftrightarrow E,\qquad C\leftrightarrow F.

The triangles are similar precisely when

∠A=∠D,∠B=∠E,∠C=∠F,\angle A=\angle D,\qquad \angle B=\angle E,\qquad \angle C=\angle F,

and, equivalently,

DEAB=EFBC=FDCA=k\frac{DE}{AB}=\frac{EF}{BC}=\frac{FD}{CA}=k

for some k>0k>0. Here ABAB, for example, denotes the length of the segment joining AA and BB.

The number kk is the scale factor from ABCABC to DEFDEF. If k>1k>1, the second triangle is an enlargement; if 0<k<10<k<1, it is a reduction. If k=1k=1, the triangles are congruent: their corresponding side lengths are equal as well as their corresponding angles.

Vertex order matters. A statement of similarity identifies which sides and angles correspond; it does not merely assert that some pairing exists. Rotating or reflecting a triangle does not change its shape, so neither its placement on the page nor its apparent orientation determines the correspondence.

Similarity is an equivalence relation: every triangle is similar to itself, similarity is symmetric, and similarity is transitive. A similarity class therefore consists of all triangles of one shape, at every positive scale.

Criteria for similarity

It is unnecessary to check all three angles and all three side ratios separately. Three standard criteria establish similarity.

Angle–angle: AA

If two angles of one triangle equal two corresponding angles of another, the triangles are similar.

The third angles are equal automatically because the interior angles of every Euclidean triangle sum to 180∘180^\circ. The criterion is therefore also called angle–angle–angle, or AAA, although the third angle condition is redundant.

For example, any two triangles with angles 30∘30^\circ, 60∘60^\circ, and 90∘90^\circ are similar, regardless of their side lengths.

Side–angle–side: SAS

If two pairs of corresponding sides are proportional and the angles included between those sides are equal, the triangles are similar.

For example, the conditions

ABDE=ACDF,∠BAC=∠EDF\frac{AB}{DE}=\frac{AC}{DF}, \qquad \angle BAC=\angle EDF

imply

△ABC∼△DEF.\triangle ABC\sim\triangle DEF.

The included-angle requirement is essential. An equal angle elsewhere in the triangle does not generally provide enough information.

Side–side–side: SSS

If all three pairs of corresponding side lengths are proportional, the triangles are similar:

ABDE=BCEF=CAFD.\frac{AB}{DE}=\frac{BC}{EF}=\frac{CA}{FD}.

One way to justify this criterion is to scale one triangle until its side lengths equal those of the other. SSS congruence then establishes equality of the corresponding angles. Alternatively, the law of cosines shows directly that a common scaling of all side lengths leaves every angle unchanged.

Why SSA is not a general criterion

Two proportional side pairs and an equal non-included angle—often called SSA—do not generally establish similarity.

For example, let sides a=5a=5 and b=8b=8 lie opposite angles AA and BB, with A=30∘A=30^\circ. The sine rule gives

sin⁡B=bsin⁡Aa=45.\sin B=\frac{b\sin A}{a}=\frac45.

Both

B≈53.13∘andB≈126.87∘B\approx53.13^\circ \quad\text{and}\quad B\approx126.87^\circ

produce valid triangles. They share the specified two side lengths and angle but have different angle sets, so they are not similar.

A useful special case occurs for right triangles: proportional hypotenuses and one pair of corresponding legs do establish similarity. The remaining legs are then proportional by the Pythagorean theorem.

Similarity transformations

Triangle similarity can also be described through a similarity transformation of the plane: a transformation that multiplies every distance by the same positive constant.

In Cartesian coordinates, such a transformation has the form

x⟼kQx+t,\mathbf{x}\longmapsto kQ\mathbf{x}+\mathbf{t},

where k>0k>0, QQ is an orthogonal matrix, and t\mathbf{t} is a translation vector.

The matrix QQ represents a rotation or a transformation involving reflection. When k=1k=1, the transformation is an isometry, preserving distances rather than merely their ratios.

This formulation distinguishes:

  • Direct similarity, which preserves orientation.
  • Opposite similarity, which reverses orientation.

Ordinary triangle similarity allows both. Thus a triangle and its mirror image are similar.

An arbitrary affine map need not preserve similarity. For example, stretching a triangle horizontally without applying the same scale factor vertically generally changes its angles.

Consequences of similarity

Suppose the scale factor from one triangle to another is kk.

Lengths and perimeter

Every pair of corresponding linear measurements has ratio kk. This includes sides, altitudes, medians, internal angle-bisector lengths, inradii, and circumradii.

Consequently, if the perimeters are P1P_1 and P2P_2,

P2=kP1.P_2=kP_1.

Ratios of corresponding lengths within each triangle remain unchanged. For example, a side-to-altitude ratio is the same in both triangles.

Area

If the areas are K1K_1 and K2K_2, then

K2=k2K1.K_2=k^2K_1.

This follows from the formula K=12bhK=\tfrac12 bh: both a corresponding base and its altitude are multiplied by kk. Thus doubling every side length quadruples the area.

Conversely, for triangles already known to be similar,

k=K2K1.k=\sqrt{\frac{K_2}{K_1}}.

Equal areas alone do not imply similarity.

Parallel sections

Let DD lie on side ABAB and EE on side ACAC of triangle ABCABC. If DEDE is parallel to BCBC, corresponding angles are equal, giving

△ADE∼△ABC.\triangle ADE\sim\triangle ABC.

Hence

ADAB=AEAC=DEBC.\frac{AD}{AB}=\frac{AE}{AC}=\frac{DE}{BC}.

The resulting proportional divisions of the sides are a standard form of the intercept theorem. Conversely, if DD and EE are interior points satisfying

ADAB=AEAC,\frac{AD}{AB}=\frac{AE}{AC},

then DEDE is parallel to BCBC.

Right triangles and trigonometry

Similarity explains why the basic ratios in trigonometry depend on an angle rather than on the size of a triangle.

Any two right triangles sharing an acute angle θ\theta are similar by AA. The ratios

sin⁡θ=opposite leghypotenuse,cos⁡θ=adjacent leghypotenuse,tan⁡θ=opposite legadjacent leg\sin\theta=\frac{\text{opposite leg}}{\text{hypotenuse}}, \qquad \cos\theta=\frac{\text{adjacent leg}}{\text{hypotenuse}}, \qquad \tan\theta=\frac{\text{opposite leg}}{\text{adjacent leg}}

are therefore identical in both triangles.

Similarity also yields important projection identities. In a right triangle ABCABC with right angle at CC, let the altitude from CC meet hypotenuse ABAB at HH. The triangles ABCABC, ACHACH, and CBHCBH are mutually similar. Their corresponding side ratios give

AC2=AB⋅AH,BC2=AB⋅HB,AC^2=AB\cdot AH, \qquad BC^2=AB\cdot HB,

and

CH2=AH⋅HB.CH^2=AH\cdot HB.

Adding the first two identities gives

AC2+BC2=AB(AH+HB)=AB2,AC^2+BC^2=AB(AH+HB)=AB^2,

providing a similarity-based proof of the Pythagorean theorem.

Applications

Indirect measurement. Similar triangles allow inaccessible lengths to be calculated from measurable ones. For vertical objects standing on the same horizontal plane, with parallel sunlight rays, the triangles formed by each object and its shadow are similar. If one object has height hh and shadow length ss, while another has shadow length SS, the second height is

H=hSs.H=h\frac{S}{s}.

The conclusion depends on the geometric assumptions, including vertical objects and a common ground plane.

Scale drawings and models. Corresponding triangular regions in an undistorted plan or model retain their angles and side ratios. Lengths follow the drawing’s scale factor, while areas follow its square.

Geometric proof. Similarity converts angle information into length equations and vice versa. It is frequently used to prove proportionality, parallelism, and identities involving altitudes or intersecting segments.

Imaging and perspective. Similar triangles underlie elementary pinhole-camera calculations relating object size, image size, and distance. However, a general perspective image of a triangle is not necessarily similar to the original: perspective projection can change both angles and side ratios.

Historical development and scope

Similarity was systematized in Euclid’s Elements, especially Book VI, using the theory of proportion developed in Book V. Book VI treats equiangular triangles, proportional sides, similarity criteria, and constructions involving similar figures. This framework supports geometric reasoning without requiring side ratios to have finite decimal or fractional representations.

The familiar criteria rely on Euclidean geometry. In non-Euclidean geometry, equality of angles need not permit arbitrary changes of size. In the hyperbolic plane of fixed curvature, equal corresponding angles determine congruent triangles; the same holds for ordinary spherical triangles on a sphere of fixed radius. Euclidean AA similarity therefore does not extend unchanged to these settings.

The standard theory also excludes degenerate triangles with collinear vertices. Such figures lack the ordinary interior-angle structure used by the similarity criteria.