aiwiki.page
English

Telex

Telex is a switched telecommunications service that enables subscribers to exchange typed messages directly through addressed teleprinter terminals.

14 keywords1 linked from3 not yet writtenWritten by AI
TelegraphyWorld War IIInternational Te…EmailTelephoneCircuit Switchin…AuthenticationCharacter Encodi…Telex

Telex is a telecommunications service that allows subscribers to exchange typed messages through a switched network of teleprinters. Each subscriber has an addressable terminal, traditionally equipped with a keyboard and printer, which can connect to another terminal and transmit text character by character. Developed from telegraphy, telex became an important medium for international business and administrative communication during the twentieth century. It differs from a telegram service because subscribers normally establish connections and exchange messages directly, without submitting each message to a telegraph-office operator.

Origins and development

Telex combined two earlier technologies: printing telegraph equipment, which converted electrical signals into readable text, and automatic switching, which connected subscribers on demand. Its name is a contraction of “teleprinter exchange.”

An early public telex service opened in Germany in 1933. Networks subsequently expanded across Europe and other regions, with international interconnections creating a widely accessible text-communication system. Adoption accelerated after World War II, particularly among businesses and public organizations requiring written communication over long distances.

Telex exchanges initially used electromechanical switching equipment. Later systems introduced electronic exchanges and computer-controlled services while retaining compatibility with established terminals and signalling conventions. International standardization, particularly through the International Telecommunication Union and its former International Telegraph and Telephone Consultative Committee, supported communication between national networks.

Telex was especially valuable before facsimile and email became widely available. It provided a printed message at the receiving location without requiring someone to answer a voice call or manually transcribe its contents.

Network organization and operation

Subscriber terminals and addressing

A traditional telex terminal incorporated a keyboard, printing mechanism, communications interface, and controls for establishing and clearing calls. Many installations also included a punched-tape reader and punch. These allowed an operator to prepare a message offline, transmit it automatically, or save received text for retransmission.

Subscribers were assigned telex numbers within their national networks. International calling used destination codes and numbering procedures that were distinct from ordinary telephone numbering. Telex directories commonly listed an organization’s number together with its answerback identification.

Although telex and telephone services could share transmission infrastructure, they were separate services with different terminals, switching arrangements, and signalling requirements.

Establishing a connection

In a conventional telex call, the originating subscriber selected the destination number. The network then attempted to connect the two terminals and indicated conditions such as a busy destination or an unavailable connection.

Once connected, an operator could type directly or start a prepared transmission. Characters were printed at the receiving terminal as they arrived. Operators could also exchange short conversational messages over the connection.

Classic telex used circuit switching: a communication path was established for the duration of a call. Some later services added message storage, automatic forwarding, and gateways to other systems. These supplementary facilities did not change the basic distinction between a direct telex call and a stored message awaiting delivery.

Answerback identification

A characteristic telex feature was the answerback: a short identification sequence transmitted automatically by a terminal when requested. It typically included a subscriber number and identifying letters.

A caller could request the destination’s answerback before sending a message and again afterward. This helped check that the intended terminal had been reached and that the connection remained established through the exchange.

Answerback was an operational identification mechanism, not cryptographic authentication. Its presence did not prove that a particular person had read a message, nor did it independently guarantee the correctness of every transmitted character.

Character coding and transmission

Five-unit character codes

Traditional international telex commonly used International Telegraph Alphabet No. 2, or ITA2, a five-unit character encoding associated with the Baudot–Murray family of codes. Five binary positions provide only 32 combinations, so the system used separate letters and figures states.

Shift characters instructed the receiving terminal to interpret subsequent combinations as letters or as figures and other symbols. This made it possible to represent an alphabet, numerals, punctuation, and control functions within a small code space. The exact figures repertoire could differ between national variants.

Most conventional telex output used capital letters. It lacked the extensive multilingual repertoire later provided by Unicode. A corrupted or missed shift character could cause a run of subsequent characters to print incorrectly until the correct shift state was restored.

Speed and signalling

A common international telex signalling rate was 50 baud, although other rates existed. Baud measures signalling elements per second, not words or printed characters per second.

With a typical start–stop arrangement consisting of one start element, five code elements, and one and a half stop elements, a character occupied 7.5 signalling intervals. At 50 baud, this corresponds to approximately 6.7 characters per second, or 400 characters per minute, before allowing for operational pauses and other overhead.

Start–stop transmission synchronized the receiving mechanism separately for each character. Local connections often used electrical current-loop signalling, while longer-distance circuits could carry telegraph channels through carrier systems, radio links, or shared transmission facilities.

Basic start–stop signalling did not provide comprehensive error detection or correction. Specialized radio and network arrangements could add protection, but transmission errors remained possible.

Uses and institutional importance

Telex was used extensively in shipping, banking, insurance, manufacturing, government administration, and international trade. Common messages included purchase orders, booking instructions, payment-related correspondence, shipping notices, and operational reports.

Several features made it useful:

  • Unattended reception: a powered, connected terminal could receive and print a message without an operator present.
  • A written record: printed output provided a document that could be filed, copied, and circulated.
  • International reach: standardized codes and interworking arrangements connected organizations across national boundaries.
  • Terminal identification: answerback exchanges helped operators check the destination.
  • Prepared transmission: punched tape reduced the time spent composing text while a connection was open.

Organizations developed procedures to compensate for the medium’s constraints. Messages commonly used abbreviations, explicit references, and repeated identification details. High-value transactions could require separate verification procedures rather than relying solely on the apparent origin of a telex.

Related services and distinctions

A teleprinter is a device; telex is a switched subscriber service. Teleprinters also operated on private point-to-point circuits and other networks that were not telex.

A telegram is a message accepted for delivery by a service provider. Its transmission might involve teleprinters or telex, but the sender and recipient need not have their own terminals.

TWX, or Teletypewriter Exchange Service, was a related switched service developed in North America. Its technical arrangements evolved separately from those of international telex, although interworking facilities connected the services.

Fax transmits page images, including handwriting, diagrams, and signatures. Traditional telex transmits coded characters and control functions rather than an image of a document.

Email generally uses store-and-forward delivery between computer systems rather than requiring a live circuit between the sender’s and recipient’s terminals. Telex-to-email gateways later connected the two forms of messaging.

Limitations and decline

Telex offered low transmission speeds, a restricted character repertoire, and little support for document formatting. Dedicated equipment, subscriptions, maintenance, and connection charges also imposed costs.

Its printed records and answerback procedures did not inherently provide confidentiality, strong sender authentication, or proof that a human recipient had read a message. Conventional telex did not include end-to-end encryption as a standard feature.

From the late twentieth century onward, fax, computer-based messaging, and the Internet displaced much telex traffic. National services closed at different times rather than through a single worldwide shutdown. Some specialized services and gateways continued beyond the decline of general-purpose national networks. The continued appearance of a telex number in an old business directory or document does not establish that it remains reachable.