Stimulated emission is the process in which an applied electromagnetic field induces an excited quantum system to make a transition to a lower-energy state, adding radiation to the stimulating field. In a photon description, the transition adds a photon to the same electromagnetic mode as the incident radiation, reinforcing its frequency, polarization, propagation pattern, and phase coherence. Stimulated emission is a fundamental interaction between radiation and matter and is the basis of amplification in lasers and masers.
Physical principle
An atom, molecule, or other quantum system can occupy distinct energy states. For a transition between an upper state with energy and a lower state with energy , the resonant radiation frequency is approximately
where is the Planck constant. This expression neglects effects such as recoil and assumes well-defined initial and final energies.
Radiation near this frequency can couple the states through an interaction such as that between the radiation’s electric field and the system’s electric dipole. Whether a transition occurs, and how strongly, depends on the interaction matrix element, the radiation’s polarization, and the selection rules governing the states.
Three processes must be distinguished:
- Absorption: a system in the lower state takes energy from radiation and moves to the upper state.
- Spontaneous emission: an excited system emits radiation without requiring an incident field.
- Stimulated emission: incident radiation induces a downward transition, increasing the radiation already present in the stimulating mode.
Stimulated emission draws its energy from the excited system, not from the incident photon. Sustained amplification therefore requires a continuing supply of excitation energy.
Meaning of “identical photons”
Stimulated emission is often described as producing a photon identical to the stimulating photon. More precisely, it adds an excitation to the same field mode. A mode is characterized by properties such as frequency, spatial structure, and polarization; for a plane wave, it also specifies the propagation direction.
This description does not mean that distinguishable photons carry individually measurable, identical phases. Phase coherence is a property of the electromagnetic field. Nor does stimulated emission provide a way to make perfect copies of arbitrary unknown quantum states: a physical amplifier also involves fluctuations and coupling to other degrees of freedom.
Einstein’s theory
Albert Einstein introduced stimulated emission in work published in 1916–1917 while studying the equilibrium between matter and thermal radiation. His argument related absorption and emission probabilities to the spectrum of blackbody radiation.
Consider populations and in two energy levels interacting with isotropic radiation. In the narrow-line approximation, let be the radiation energy density per unit frequency at the transition frequency. The transition rates are
The quantities , , and are the Einstein coefficients. They describe spontaneous emission, absorption, and stimulated emission, respectively. For a broadened transition, the stimulated rates involve an integral over the radiation spectrum and the transition’s line profile.
Requiring consistency with the Boltzmann distribution and Planck’s radiation law gives
where and are the statistical degeneracies of the levels and is the speed of light. The second relation uses energy density per unit ordinary frequency, summed over propagation directions and polarizations; other conventions produce different prefactors.
For equally degenerate levels, . Thus, a given radiation field is equally effective at inducing upward and downward transitions per system in the corresponding state. Net amplification depends on the populations, not simply on the presence of excited systems.
Quantum description
In quantum mechanics, stimulated emission follows from the coupling between matter and a quantized radiation field. For a mode initially containing photons, the emission matrix element contains a factor , so the emission probability is proportional to
The term proportional to represents stimulation by the existing radiation. The remaining term allows emission even when that mode is initially empty. By contrast, absorption from the mode has a probability proportional to .
This behavior reflects the bosonic character of photons. It also connects spontaneous and stimulated emission within one theoretical framework: both arise from the same matter–field coupling.
The familiar rate description has limits. Under a strong, coherent resonant field, an isolated two-level system can undergo coherent oscillations between its states rather than simple irreversible upward and downward jumps. Rate equations are most appropriate when relaxation, dephasing, or averaging makes a population-based description adequate.
Population inversion and optical gain
An excited medium can exhibit stimulated emission while still absorbing more radiation than it emits. Amplification requires stimulated emission to exceed absorption and other losses.
For a simple two-level transition with statistical degeneracies and , the condition for net stimulated gain is
This condition is called population inversion. At positive-temperature thermal equilibrium, the upper state has a smaller population per sublevel than the lower state, so ordinary equilibrium matter does not satisfy this condition. Energy must be supplied by pumping, for example through light, electrical discharge, electrical injection, or chemical reactions.
For a beam passing through an amplifying medium, a common small-signal model is
where is intensity, is the stimulated gain coefficient, and represents other losses. If these coefficients remain constant,
For a simple transition,
where and are the stimulated-emission and absorption cross sections, and the are number densities.
Pumping and saturation
Continuous resonant pumping of an ideal closed two-level system cannot produce a steady population inversion: the pump drives stimulated emission as well as absorption, tending to equalize the populations. Practical lasers commonly use additional levels or more complex electronic structures to separate pumping from the amplifying transition.
As the amplified field becomes stronger, stimulated emission depletes the upper-state population and can populate the lower state. The gain consequently decreases, a phenomenon called gain saturation. Exponential amplification therefore applies only over a limited range.
In semiconductors, gain involves populations across electronic bands rather than a single pair of discrete atomic levels. The occupation of electron and hole states determines whether an optical transition produces net gain or absorption.
Lasers and masers
A laser combines an amplifying medium with a mechanism that selects and sustains electromagnetic modes. In many designs, an optical cavity returns light through the gain medium repeatedly. Oscillation begins when the round-trip gain compensates for the round-trip losses.
Stimulated emission supplies amplification; the cavity and gain spectrum help determine frequency, spatial structure, and polarization. Spontaneous emission can seed the initial field, while a deliberately injected signal can control or seed amplification.
A maser uses the same principle at microwave or related frequencies. The first ammonia maser operated in 1954, and the first working laser, a ruby device built by Theodore Maiman, operated in 1960.
Stimulated emission does not require an optical cavity. A medium can amplify an incident signal during a single passage. It can also amplify its own spontaneous emission, producing amplified spontaneous emission without ordinary resonator-based laser oscillation.
Applications and observational significance
Stimulated emission enables optical amplifiers used in telecommunications, including erbium-doped fiber amplifiers, which increase signal power without first converting the signal into an electrical form. Semiconductor optical amplifiers provide another implementation.
Laser systems based on stimulated emission are used in manufacturing, spectroscopy, precision measurement, imaging, and scientific research. Their properties depend not only on stimulated emission but also on pumping, mode selection, cavity design, and control of noise.
In stimulated-emission-depletion microscopy, a spatially patterned depletion beam drives excited fluorescent molecules back to their ground state outside a small central region. Suppressing fluorescence around that region permits imaging beyond the conventional far-field diffraction limit.
Natural maser emission occurs in astronomical environments where pumping processes create population inversions in molecules such as water, hydroxyl, and methanol. These narrow, bright spectral features are used in astronomy to study gas motions and physical conditions; suitable sources also support precise geometric distance measurements.
Limitations and distinctions
Stimulated emission is resonant and selective. Its useful bandwidth depends on energy-level structure and broadening mechanisms, including finite excited-state lifetime, collisions, and the Doppler effect. Not every excited system has a sufficiently strong radiative transition for practical amplification.
Spontaneous emission and amplified spontaneous emission contribute noise. A phase-insensitive linear amplifier cannot amplify an arbitrary field without adding quantum noise. Stimulated emission therefore does not guarantee perfectly noiseless amplification or unlimited coherence.
Finally, stimulated emission is distinct from scattering. In a simple stimulated-emission event, the emitting system loses stored internal energy. In elastic scattering, the system returns to its initial internal state; in inelastic scattering, energy is exchanged through a different transition process. These mechanisms can coexist in the same material but have different effects on the radiation.