A spit is an elongated accumulation of sand, gravel, or other loose sediment that projects from a coast into a sea, bay, or lake while remaining attached to land at one end. It is a depositional landform, most commonly built by longshore drift, which transports sediment along the shoreline. Spits frequently develop where the coastline changes direction or crosses the entrance to a bay or estuary. Their unattached ends may be straight, curved, or divided into several successive hooks.
Formation and sediment transport
Waves approaching a beach obliquely can generate an alongshore current and move sediment along the coast. On the beach face, the uprush of water carries grains diagonally up the slope, while the return flow commonly carries them more directly downslope. Together with transport in the surf zone, these processes produce longshore drift. Sediment may come from cliff and beach erosion, offshore deposits, or material supplied by a river.
Where the coast turns sharply landward, sediment moving along it may continue beyond the shoreline rather than following its new outline. If sediment delivery exceeds removal, a submerged shoal can grow upward and outward, eventually forming an emergent spit. Deposition is encouraged where the transporting flow weakens or where wave shelter reduces the capacity to move sediment.
Spit growth depends on several interacting conditions:
- Sediment supply: sustained growth requires material from the adjoining coastal system.
- Wave direction and strength: these control the direction and rate of much alongshore transport.
- Coastal geometry: headlands, bays, and the shape of the seabed influence where sediment accumulates.
- Tidal and river currents: flows through an inlet can redistribute sediment or maintain a channel that prevents complete closure.
- Water-level change: variations in water level alter where waves act and how frequently the spit is submerged.
A spit therefore does not form simply wherever a coastline bends. The local balance between sediment input, transport, deposition, and removal must permit it.
Shape and internal structure
A spit usually has an attached root, an elongated central section, and a free distal end. Its exposed side commonly faces stronger wave action, while its sheltered side borders quieter water. Width, elevation, and sediment composition vary substantially among sites.
Straight and recurved spits
A relatively straight spit may develop where sediment transport remains strongly directional. A recurved spit has a distal end that bends, commonly toward sheltered water. Curvature can result from changing wave directions, wave refraction around the tip, and currents that redistribute sediment near the end.
Successive curved ridges can produce a compound spit. These ridges record earlier shoreline positions and episodes of growth, although interpreting them requires attention to later erosion and reworking. A hook is not necessarily evidence of a single change in prevailing wind: several interacting processes can produce similar outlines.
Sediment and surface features
Sandy spits may support coastal dunes where wind moves dry beach sediment inland. Gravel or shingle spits often have conspicuous storm-built ridges. Many spits contain mixtures of grain sizes, and their deposits may preserve beach layers, overwash deposits, and former channels.
Behind a spit, reduced wave energy can allow finer sediment to settle. This sheltered environment may develop into a lagoon, tidal flat, or salt marsh, depending on water exchange, sediment supply, vegetation, and elevation.
Change through time
Spits are mobile landforms rather than fixed coastal projections. Their length, width, orientation, and attachment can change over seasons, during individual storms, or over centuries.
Extension occurs when sediment accumulates at the tip. Widening can result from beach accretion or the addition of successive ridges. Conversely, reduced sediment supply or increased removal may cause retreat, narrowing, or loss of the distal end.
During storms, waves and elevated water levels may carry sediment across the crest. This process, called overwash, moves material toward the sheltered side and can contribute to landward migration. A storm may also cut a breach through a low section, temporarily or persistently separating part of the spit from the mainland.
Tidal currents can enlarge a breach if substantial water exchange develops through it. Alternatively, wave-driven deposition may close the opening again. Whether a breach persists depends partly on the volume of water flowing through it and the supply of sediment available to fill it.
Over longer periods, sea-level rise can increase inundation and encourage landward migration. A spit may persist by moving and accumulating sediment, but it can also fragment or become submerged if sediment supply and available space are insufficient. Its response cannot be inferred from sea-level change alone.
Distinction from related landforms
Spits belong to a broader group of depositional coastal features, but several distinctions are useful:
- A barrier island is separated from the mainland by water, whereas a spit is attached at one end. Breaching can convert part of a spit into an island.
- A baymouth bar extends across a bay entrance and connects land at both ends. Some form when an advancing spit reaches the opposite shore.
- A tombolo is a sedimentary connection between an island and another landmass, often associated with wave shelter and the convergence of sediment transport behind the island.
- A river delta forms through sediment deposition at a river mouth. A spit near a delta may use river-supplied sediment, but its elongated shape is principally produced by coastal redistribution.
These categories describe morphology and formation rather than permanently separate objects. A single coastal feature can change category as it grows, breaches, or reconnects. Geographic names also do not always match strict geomorphological definitions.
Examples
Spurn, at the mouth of the Humber estuary in England, is a prominent spit composed of sand and shingle. Its form reflects sediment supplied along the Holderness coast and the interaction of waves with strong estuarine currents.
Farewell Spit, at the northern end of New Zealand’s South Island, is a large sandy spit extending eastward from the mainland. Extensive tidal flats occupy its sheltered side.
The Curonian Spit, between the Baltic Sea and the Curonian Lagoon, is a large sandy barrier spit with extensive dune landscapes. It illustrates how a spit can form part of a much broader coastal system involving beaches, dunes, and lagoonal environments.
Spits also occur along large lakes, where wind-generated waves and alongshore sediment transport operate without oceanic tides.
Ecological and human significance
Spits can shelter wetlands and provide nesting, feeding, and resting habitat for coastal birds. Their exposed beaches, dunes, sheltered shores, and tidal flats support different communities over relatively short distances. Vegetation can trap windblown sand and help stabilize dunes, although erosion and deposition remain part of the system.
Human uses include recreation, settlement, navigation facilities, and coastal protection. However, spits can be vulnerable to flooding, overwash, breaching, and rapid shoreline movement.
Coastal engineering can alter their development. Groynes and harbour structures may intercept sediment before it reaches a spit, while dredging can modify channels and local transport pathways. Beach nourishment adds sediment, and protective structures can hold particular sections in place, but both may change the distribution of erosion and deposition elsewhere.
Because spits exchange sediment with adjacent beaches, nearshore shoals, and inlets, their assessment generally requires a regional sediment budget rather than consideration of the visible landform alone.