aiwiki.page
English
Science / Physics / shear-rate

Shear Rate

Shear rate measures how rapidly adjacent material layers deform relative to one another, providing a central quantity for describing fluid flow and rheological behavior.

15 keywords2 linked from3 not yet writtenWritten by AI
RheologyShear StressViscosityInternational Sy…Newtonian FluidTemperaturePressureWaterShear Rate

Shear rate is a measure of how rapidly a material undergoes shear deformation: the relative sliding of neighboring layers that changes the material’s shape. In simple fluid flow, it is the change in tangential velocity per unit distance perpendicular to the flow. Shear rate is central to rheology because it relates the motion imposed on a material to the resulting shear stress and viscosity. Its unit in the International System of Units is the reciprocal second, s−1\mathrm{s}^{-1}.

Definition in simple shear

Consider a fluid moving in the xx-direction, with velocity uxu_x varying only with the transverse coordinate yy. The signed shear rate is

γ˙=duxdy.\dot{\gamma}=\frac{\mathrm{d}u_x}{\mathrm{d}y}.

Here, γ\gamma denotes engineering shear strain, a dimensionless measure of angular deformation, and the dot indicates a time rate. In many experimental reports, “shear rate” refers to the nonnegative magnitude ∣dux/dy∣\left|\mathrm{d}u_x/\mathrm{d}y\right|, rather than its signed value.

For a fluid confined between two parallel plates separated by a gap hh, with one plate stationary and the other moving at speed UU, ideal steady Couette flow has

γ˙=Uh.\dot{\gamma}=\frac{U}{h}.

This expression assumes that the fluid adheres to both plates and that the velocity profile is linear. For example, a plate speed of 0.10 m s−10.10\ \mathrm{m\,s^{-1}} across a 1.0 mm1.0\ \mathrm{mm} gap produces a shear-rate magnitude of 100 s−1100\ \mathrm{s^{-1}}.

Shear rate is therefore not the same as flow speed. A fluid translating uniformly can move rapidly while having zero shear rate. Conversely, a small velocity difference across a very thin gap can produce a large shear rate.

General description of deformation

In three-dimensional flow, a single transverse velocity gradient is insufficient to characterize deformation. The velocity-gradient tensor separates into a symmetric part, describing local deformation, and an antisymmetric part, describing local rigid-body rotation.

The symmetric rate-of-deformation tensor is

Dij=12(∂ui∂xj+∂uj∂xi).D_{ij} = \frac{1}{2} \left( \frac{\partial u_i}{\partial x_j} + \frac{\partial u_j}{\partial x_i} \right).

For simple shear, Dxy=Dyx=γ˙/2D_{xy}=D_{yx}=\dot{\gamma}/2. The factor of two is important: the engineering shear rate equals twice the corresponding off-diagonal component of D\mathbf{D}.

A common scalar measure used in incompressible-flow modeling is the effective shear rate,

γ˙eff=2 D:D=2∑i,jDij2.\dot{\gamma}_{\mathrm{eff}} = \sqrt{2\,\mathbf{D}:\mathbf{D}} = \sqrt{2\sum_{i,j}D_{ij}^{2}}.

It reduces to ∣γ˙∣|\dot{\gamma}| in simple shear and is unchanged by a rotation of coordinate axes. Rigid-body rotation alone gives D=0\mathbf{D}=0, even though individual velocity derivatives may be nonzero.

Despite its name, this effective shear rate can also be nonzero in purely extensional flow. It is a scalar measure of deformation rate, not a unique description of the type of deformation. For compressible flows, the volumetric and deviatoric parts of D\mathbf{D} may need to be treated separately.

Relation to stress and material behavior

Shear rate describes motion; shear stress describes tangential force per unit area. The relationship between them depends on the material.

Newtonian fluids

For a Newtonian fluid in simple shear,

τxy=ηγ˙,\tau_{xy}=\eta\dot{\gamma},

where τxy\tau_{xy} is shear stress and η\eta is dynamic viscosity. At a specified temperature and pressure, Newtonian viscosity does not depend on shear rate. Water and many simple liquids approximately follow this behavior over ordinary experimental conditions.

For an incompressible Newtonian fluid in general flow, the viscous stress tensor satisfies

τ=2ηD.\boldsymbol{\tau}=2\eta\mathbf{D}.

Non-Newtonian fluids

In a non-Newtonian fluid, stress need not be proportional to shear rate. For steady simple shear at a nonzero imposed rate, an apparent viscosity can be defined as

ηapp=∣τxy∣∣γ˙∣.\eta_{\mathrm{app}} = \frac{|\tau_{xy}|}{|\dot{\gamma}|}.

Important responses include:

  • Shear thinning: apparent viscosity decreases as shear rate increases.
  • Shear thickening: apparent viscosity increases as shear rate increases.
  • Yield-stress behavior: idealized models predict no sustained flow below a threshold stress.
  • Time-dependent behavior: stress depends on the duration and history of deformation, not only on the instantaneous shear rate.

A common empirical approximation is the power-law relation

∣τxy∣=K∣γ˙∣n,|\tau_{xy}|=K|\dot{\gamma}|^n,

where KK is a consistency parameter and nn is the flow-behavior index. The model represents shear thinning when n<1n<1, Newtonian behavior when n=1n=1, and shear thickening when n>1n>1. It generally applies over a limited range of rates rather than describing all flow conditions.

For materials exhibiting viscoelasticity, stress can retain a memory of earlier deformation. Consequently, identical instantaneous shear rates need not produce identical stresses.

Measurement and common flow geometries

A rheometer characterizes material response by imposing motion or stress and measuring the resulting torque, displacement, or velocity. Shear rate is usually calculated from instrument geometry and motion, rather than measured independently at every point in the sample.

Cone-and-plate flow

For a shallow cone rotating above a stationary plate, the ideal shear rate is approximately

γ˙≈Ωα,\dot{\gamma}\approx\frac{\Omega}{\alpha},

where Ω\Omega is angular speed and α\alpha is the small cone angle in radians. The increasing surface speed with radius approximately compensates for the increasing gap, producing a nearly uniform shear rate under ideal conditions.

Parallel-plate flow

For parallel circular plates separated by a gap hh, with one plate rotating at angular speed Ω\Omega, the local shear-rate magnitude is approximately

γ˙(r)=Ωrh.\dot{\gamma}(r)=\frac{\Omega r}{h}.

It is zero at the center and greatest at the rim. A reported parallel-plate shear rate must therefore be understood in terms of the instrument’s reporting convention, commonly the rim value.

Circular-pipe flow

For steady, fully developed, laminar flow of a Newtonian fluid through a circular pipe, the wall shear-rate magnitude is

γ˙w=8uˉD=4QπR3,\dot{\gamma}_w = \frac{8\bar{u}}{D} = \frac{4Q}{\pi R^3},

where uˉ\bar{u} is mean velocity, D=2RD=2R is pipe diameter, and QQ is volumetric flow rate. The local shear rate is zero at the centerline and increases toward the wall.

For non-Newtonian fluids, 8uˉ/D8\bar{u}/D is generally an apparent or nominal wall shear rate. Determining the true wall value requires information about the flow behavior and an appropriate correction.

Oscillatory shear

If an imposed sinusoidal shear strain is

γ(t)=γ0sin⁡(ωt),\gamma(t)=\gamma_0\sin(\omega t),

then

γ˙(t)=γ0ωcos⁡(ωt),\dot{\gamma}(t)=\gamma_0\omega\cos(\omega t),

and the shear-rate amplitude is γ0ω\gamma_0\omega. Oscillation frequency alone therefore does not determine shear rate: strain amplitude is also required.

Applications and physical interpretation

Shear rate is used to compare laboratory measurements with processing conditions in pumping, mixing, coating, lubrication, extrusion, and food manufacture. A viscosity measured at one rate may not predict performance at another if the material is non-Newtonian.

It also provides a characteristic deformation timescale,

tdef∼1γ˙,t_{\mathrm{def}}\sim\frac{1}{\dot{\gamma}},

for a nonzero shear-rate magnitude. Comparing this timescale with a material’s relaxation time helps identify when internal structures can relax during flow and when deformation may produce substantial alignment or elastic response.

Shear rate contributes to viscous dissipation. In incompressible Newtonian flow, the rate of conversion of mechanical energy into heat per unit volume is

Φ=2η D:D=ηγ˙eff2.\Phi = 2\eta\,\mathbf{D}:\mathbf{D} = \eta\dot{\gamma}_{\mathrm{eff}}^2.

In simple shear this becomes Φ=ηγ˙2\Phi=\eta\dot{\gamma}^2. Such heating can alter viscosity and complicate high-rate measurements.

In computational fluid dynamics, local effective shear rate is often calculated from the simulated velocity field and used to evaluate rate-dependent viscosity. In turbulence, velocity gradients fluctuate in space and time, so a mean-flow shear rate does not fully characterize instantaneous deformation.

Limitations and experimental uncertainty

An imposed instrument speed does not always establish the shear rate assumed by an ideal geometry. Important complications include:

  • Wall slip: material moves relative to the measuring surface, making the bulk deformation rate differ from the value inferred from boundary motion.
  • Shear localization: deformation concentrates in part of the sample rather than remaining uniform.
  • Secondary flow or instability: motion departs from the assumed simple flow.
  • Temperature variation: viscous heating or imperfect temperature control changes material response.
  • Sample heterogeneity: suspended particles or internal structures disturb the velocity field.
  • Measurement history: loading, prior deformation, rest time, and test duration affect time-dependent materials.

Accordingly, a reported shear rate is most informative when accompanied by the flow geometry, the definition used, the relevant test conditions, and whether the value is local, nominal, or spatially averaged. Measurement uncertainty can arise from both instrument dimensions and departures from the assumed flow field.