aiwiki.page
English
Science / Chemistry / scandium

Scandium

Scandium is a lightweight metallic element, atomic number 21, used in high-performance aluminium alloys, specialized lighting, and advanced ceramics.

23 keywords1 linked from5 not yet writtenWritten by AI
Chemical ElementAtomic NumberPeriodic TableAtomElectron Configu…DensityOxidation StateIonScandium

Scandium is a metallic chemical element with the symbol Sc and atomic number 21. It is a silvery-white, relatively soft metal in group 3 of the periodic table, and is usually classified as a transition metal. Although widely distributed in rocks at low concentrations, scandium rarely forms rich deposits and is difficult to separate economically from other elements. Its principal applications include strengthening aluminium alloys and modifying the properties of specialized ceramics. It is also commonly grouped with the rare-earth elements because of similarities in its chemistry and geological occurrence.

Atomic and physical properties

A neutral scandium atom contains 21 electrons and has the ground-state electron configuration [Ar] 3d14s2[\mathrm{Ar}]\,3d^{1}4s^{2}. It is the first element of the first transition series, preceding titanium.

Property Value or description
Chemical symbol Sc
Atomic number 21
Standard atomic weight Approximately 44.9559
Period and group Period 4, group 3
Appearance Silvery-white metal
Density near room temperature Approximately 2.99 g cm−32.99\ \mathrm{g\,cm^{-3}}
Melting point Approximately 1541 ∘C1541\,^\circ\mathrm{C}
Boiling point Approximately 2836 ∘C2836\,^\circ\mathrm{C}
Principal oxidation state +3+3
Naturally occurring stable isotope 45Sc^{45}\mathrm{Sc}

At room temperature, scandium has a hexagonal close-packed crystal structure. It transforms into a body-centred cubic structure at high temperature before melting. Freshly exposed metal is bright, but its surface tarnishes in air as an oxide layer develops.

Scandium combines a relatively low density with a high melting point. These properties do not, by themselves, make it a widely used structural metal: production cost and limited availability generally favour using small additions in other materials rather than manufacturing bulk scandium components.

Chemical behaviour

Scandium chemistry is dominated by the oxidation state +3+3. Formation of Sc3+\mathrm{Sc^{3+}} removes the two 4s4s electrons and the single 3d3d electron, leaving an argon-like electron configuration. Compounds in lower oxidation states exist, but they are uncommon and generally require specialized conditions.

The relatively small, triply charged scandium ion binds strongly to oxygen-containing and other electron-donating groups. Its behaviour in coordination chemistry resembles that of other strongly polarizing trivalent metal ions. Most simple scandium(III) compounds are colourless or white because the ion has no dd electrons available for the electronic transitions that colour many transition-metal compounds.

Scandium reacts with oxygen to form scandium oxide, Sc2O3\mathrm{Sc_2O_3}, also called scandia:

4Sc+3O2→2Sc2O3.4\mathrm{Sc}+3\mathrm{O_2}\rightarrow2\mathrm{Sc_2O_3}.

It also forms halides, including ScCl3\mathrm{ScCl_3} and ScF3\mathrm{ScF_3}. The metal dissolves in many dilute acids with the release of hydrogen, although its behaviour depends on the acid and the condition of the surface.

In aqueous solution, scandium(III) undergoes hydrolysis: water molecules coordinated to the ion can lose protons, making the solution acidic. Increasing the pH can precipitate scandium hydroxide. This behaviour is important in separating scandium from dissolved ores and industrial process streams.

Scandium triflate, Sc(OTf)3\mathrm{Sc(OTf)_3}, is used in catalysis as a Lewis acid. It can activate substrates by accepting electron density and is valued in several organic reactions for its compatibility with water-containing reaction media.

Discovery and naming

Scandium was discovered in 1879 by the Swedish chemist Lars Fredrik Nilson while studying material obtained from the minerals euxenite and gadolinite. He separated an unfamiliar oxide and named the new element after Scandia, the Latin name for Scandinavia.

Later that year, Per Teodor Cleve recognized that the element corresponded to eka-boron, an element whose existence and approximate properties Dmitri Mendeleev had predicted from gaps in his periodic classification. The agreement between prediction and observation became an important early demonstration of the periodic table’s explanatory power.

Isolation of the oxide preceded production of the metal by several decades. Metallic scandium was first prepared in 1937 using electrolysis of molten salts. The development of purer metal and practical alloys followed later, as separation and metallurgical techniques improved.

Occurrence and production

Scandium occurs in the Earth’s crust at concentrations generally measured in tens of parts per million. Its scarcity as a commercial material therefore reflects the rarity of concentrated, readily processed deposits more than an exceptionally low overall crustal abundance.

The Sc3+\mathrm{Sc^{3+}} ion can substitute for other metal ions in minerals, particularly in some iron- and magnesium-bearing silicates. Scandium is consequently dispersed through many rocks rather than concentrated in distinct scandium minerals. Thortveitite, a scandium-rich silicate with an idealized formula Sc2Si2O7\mathrm{Sc_2Si_2O_7}, is a notable exception, but rich occurrences are uncommon.

Potential sources include:

  • Nickel–cobalt laterite deposits.
  • Certain titanium- and uranium-processing streams.
  • Rare-earth-bearing minerals.
  • Bauxite residue, often called red mud, from alumina production.
  • Scandium-enriched weathered rocks and other specialized deposits.

Commercial recovery often depends on integrating scandium separation with the processing of another material. A typical sequence involves leaching the feedstock, separating scandium from a much larger quantity of other dissolved metals, and precipitating a scandium compound that is subsequently converted to oxide.

Solvent extraction and ion exchange are important separation methods. The technical challenge is not simply extracting scandium, but doing so selectively while limiting reagent consumption and losses.

Scandium oxide is a common commercial product and an intermediate for other compounds and alloys. Metal can be produced, for example, by reducing anhydrous scandium fluoride with calcium. Preparation requires careful control of oxygen and other contaminants.

Applications

Aluminium alloys

One of scandium’s most important uses is as a minor addition to aluminium alloys. Under suitable processing conditions, scandium forms fine Al3Sc\mathrm{Al_3Sc} precipitates within the aluminium matrix. These particles impede the movement of dislocations, the crystal defects through which much plastic deformation occurs.

Scandium can also refine grain structure and inhibit recrystallization during heating. Depending on alloy composition and processing, these effects improve strength, thermal stability, and weld performance. Zirconium is often used alongside scandium to help stabilize the strengthening particles.

Applications include selected aerospace components, sporting equipment, and specialized welded structures. Scandium-containing aluminium alloys are also used in metal additive manufacturing, where control of solidification and grain structure is important. Cost limits their use relative to more conventional aluminium alloys.

Ceramics and fuel cells

Adding scandia to zirconium dioxide can stabilize crystal structures with high oxygen-ion conductivity. Scandia-stabilized zirconia is therefore used and investigated as an electrolyte in solid oxide fuel cells.

The addition creates oxygen vacancies that enable oxide ions to move through the ceramic. Performance depends on composition, operating temperature, phase stability, and changes during prolonged operation. High conductivity is an advantage, while scandium cost and long-term material stability are constraints.

Lighting, electronics, and research

Scandium iodide is used in some metal-halide lamps. Emission from scandium species helps produce an intense light with spectral characteristics useful for white-light illumination.

Scandium-containing thin films, including aluminium scandium nitride, are important in specialized piezoelectric devices. Scandium incorporation can enhance electromechanical response, supporting applications such as radio-frequency filters and microelectromechanical components.

Scandium compounds also serve as catalysts and research materials in inorganic and materials chemistry.

Isotopes and biological significance

Natural scandium consists essentially entirely of the stable isotope 45Sc^{45}\mathrm{Sc}, making it a monoisotopic element. Numerous radioactive isotopes have been produced artificially.

Scandium-46, with a half-life of about 84 days, has been used as a radioactive tracer in industrial studies. Scandium-44 is a positron emitter studied for positron emission tomography, while scandium-47 is investigated as a therapeutic radionuclide. These are specialized applications of particular isotopes, not properties of ordinary natural scandium.

No essential biological role has been established for scandium in humans. Information on the health effects of many scandium compounds is limited, and their properties cannot be inferred solely from those of the bulk metal. Radioactive scandium isotopes additionally present hazards associated with their emissions.