A ribbed vault is a form of vault in which projecting arched members, called ribs, define the divisions of a curved overhead surface. The panels between the ribs are known as webs or cells. Usually constructed of stone or brick, ribbed vaults became a defining feature of Gothic architecture, although ribbed forms also occur in earlier Romanesque buildings and in Islamic architecture. Ribs can serve structural, constructional, and decorative purposes; their precise role varies with the vault’s geometry and method of construction.
Form and terminology
A vault spans an interior through the action of one or more arches or curved masonry surfaces. In a ribbed vault, some of these curves are emphasized by distinct bands of masonry projecting below the webbing.
The principal components include:
- Diagonal ribs, which typically cross a bay from corner to corner.
- Transverse ribs, which separate successive bays across the length of a nave, aisle, or other interior.
- Wall ribs, often called formerets, which follow the intersections between a vault and its enclosing walls.
- Webbing, the curved masonry panels between ribs.
- Bosses, projecting stones that cover or accentuate rib intersections and may carry carved ornament.
- Springings, the lower points from which the ribs and vault surfaces rise.
A bay is a repeated spatial unit, generally defined by adjacent supports. In many medieval churches, the arrangement of vault bays corresponds to the spacing of piers below.
A ribbed vault differs from a groin vault, whose intersecting curved surfaces meet along edges called groins without necessarily having separate projecting ribs. It also differs from a barrel vault, which extends a single arch profile along a longitudinal axis. These categories describe architectural form rather than a simple sequence in which one type completely replaced another.
Construction and structural behavior
Building the vault
Medieval builders commonly erected principal ribs on temporary timber supports known as centering. The ribs consisted of shaped wedge-like masonry blocks, or voussoirs. Once completed and sufficiently stable, they provided defined edges against which the webbing could be constructed.
This method could reduce the amount or complexity of temporary timberwork compared with supporting an entire vault surface at once. However, construction practices differed: some webbing required substantial formwork, while other techniques used smaller movable supports or masonry laid in ways that limited the need for continuous centering.
The webs were often thinner than the principal ribs and could be built from relatively small stones or bricks. Above the visible vault, builders might add fill near the springings or other masonry that affected stability and the distribution of loads. The stone vault commonly stood beneath a separate weatherproof roof rather than serving as the exposed roof surface.
Loads and thrust
Masonry vaults carry loads predominantly through compression. Their weight produces both downward forces and outward thrust at the supports. Piers, walls, buttresses, and, in many large Gothic churches, flying buttresses form part of the system that resists these forces.
Ribs can stiffen parts of a vault, support web edges, and help direct loads toward selected support zones. Nevertheless, a ribbed vault is not simply a skeletal frame carrying passive infill. The webbing can itself transmit substantial forces, and ribs and webs interact as a three-dimensional masonry structure. Cracking, movement, construction sequence, and the connection between ribs and panels can change that interaction.
The familiar explanation that ribs alone carry all the vault’s weight is therefore inadequate. Equally, describing every rib as merely ornamental overlooks its possible role during construction and in the completed structure.
Geometry
A difficulty in vault design is coordinating arches of different spans. Over a rectangular bay, diagonal, transverse, and wall arches have different lengths in plan. If all are semicircular, they naturally rise to different heights.
The pointed arch offered builders greater flexibility in coordinating these curves. Arches of different widths could be given approximately similar crown heights by adjusting their curvature. Ribbed vaults do not, however, require pointed arches: early examples often combine round and pointed profiles, and some vault crowns are distinctly domed rather than level.
Historical development
Earlier traditions
Rib-like members and reinforced vault intersections occur in several architectural traditions before the mature Gothic period. These precedents should not all be treated as identical systems or as evidence of a single uninterrupted line of development.
In Islamic architecture, the tenth-century extensions to the Great Mosque of Córdoba contain celebrated intersecting-rib domes. Their ribs form geometric patterns that leave the center open rather than simply crossing at a central keystone. These works predate the widespread use of Gothic ribbed vaulting, but the routes and extent of their influence on northern European construction remain subjects of historical interpretation.
In late eleventh- and early twelfth-century European building, particularly within Romanesque architecture, ribbed vaulting developed through experimentation with masonry ceilings and their supports. Durham Cathedral, begun in 1093, preserves important early examples. The dating of individual vaults and the identification of the earliest fully developed ribbed vault are more complicated than assigning the invention to one building.
Gothic adoption
During the twelfth century, ribbed vaulting became central to Gothic church construction in northern France. The rebuilt eastern end of the abbey church of Saint-Denis, consecrated in 1144, is a major early example of its integration with pointed arches, slender supports, and an interconnected arrangement of spaces.
Ribbed vaults helped builders coordinate increasingly varied plans, including ambulatories and radiating chapels. Their use alongside improved buttressing and changes in wall construction supported the development of taller interiors and larger window openings. These changes depended on the whole building system, not on ribs alone.
As Gothic architecture spread, regional traditions developed distinctive vault patterns. English builders elaborated ridge ribs, tiercerons, and liernes; Central European builders developed extensive net and star configurations; and Iberian churches combined complex rib patterns with varied bay shapes and ornamental programs.
Principal types
Quadripartite vault
A quadripartite vault has four principal web compartments, usually formed by two intersecting diagonal ribs over a square or rectangular bay. It became a common solution in Gothic churches because it could be repeated in a clear sequence along the interior.
Sexpartite vault
A sexpartite vault divides a bay into six principal compartments, typically through the addition of an intermediate transverse rib to a diagonal-rib arrangement. In some early Gothic churches, it spans a major bay corresponding to two smaller units in the arcade below.
Its support pattern can produce alternating concentrations of load, sometimes reflected in alternating stronger and more slender supports. The relationship is not universal, since the design of the supports also depended on other structural and architectural decisions.
Tierceron vault
A tierceron is an additional rib that rises from a springing but does not continue to the principal central intersection. It commonly meets a ridge rib or another junction above. Tiercerons enrich the pattern while subdividing the vault surface.
Lierne, star, and net vaults
A lierne is a short connecting rib that does not originate at a springing. Liernes join other ribs and can form stars, polygons, and intricate meshes.
The terms star vault and net vault describe the resulting overall patterns rather than one rigid structural formula. A net vault often creates visual continuity across successive bays, reducing the prominence of each individual bay as a separate unit.
Fan vault
A fan vault is formed from spreading, concave, approximately conoidal surfaces articulated by ribs of matching curvature. Developed in medieval England, it produces repeated fan-like units rather than the more varied intersecting arches of a conventional quadripartite vault.
The cloisters of Gloucester Cathedral provide an important early example. The chapel of King’s College, Cambridge, contains a monumental later application. In fan vaulting, the close geometric relationship between ribs and panels makes a simple distinction between a supporting rib framework and separate infill particularly misleading.
Architectural expression and conservation
Ribs make the organization of an interior visible. They can connect overhead patterns to shafts on the supporting piers, emphasize direction along a nave, or draw attention to a crossing, choir, or chapel. Carved bosses may display foliage, heraldry, religious figures, or narrative scenes. Many medieval vaults also incorporated painted decoration and polychromy, so their historical appearance was not necessarily that of exposed, uncolored stone.
Later Gothic Revival buildings adopted ribbed vaulting or imitated its appearance in plaster, timber, and other materials. A ribbed ceiling therefore need not be a load-bearing masonry vault.
The conservation and restoration of historic ribbed vaults requires attention to the complete structural system. Cracks or displaced ribs may reflect movement in foundations, piers, walls, buttresses, or roofs rather than a defect confined to the vault itself. Assessment must distinguish structural movement from superficial damage and account for concealed masonry, earlier repairs, and the interaction between ribs and webbing.