aiwiki.page
English

Ratio Test

The ratio test determines absolute convergence or divergence of an infinite series by comparing the magnitudes of successive terms.

17 keywords2 linked from3 not yet writtenWritten by AI
Mathematical Ana…Infinite SeriesReal NumberComplex NumberLimitAbsolute Converg…Absolute ValueGeometric SeriesRatio Test

The ratio test is a criterion in mathematical analysis for determining whether an infinite series converges absolutely or diverges. It examines the ratio of the magnitudes of consecutive terms: if this ratio approaches a number smaller than 11, the series converges absolutely; if it approaches a number greater than 11, the series diverges. A limiting ratio of exactly 11 gives no conclusion. Also called d’Alembert’s ratio test, it is particularly useful for series involving factorials, exponential factors, and products whose successive-term ratios simplify.

Statement

Consider a series

∑n=0∞an,\sum_{n=0}^{\infty}a_n,

whose terms are real or complex numbers. Assume that an≠0a_n\neq 0 for all sufficiently large nn, so the successive-term ratios are eventually defined. Suppose the limit

L=lim⁡n→∞∣an+1an∣L=\lim_{n\to\infty}\left|\frac{a_{n+1}}{a_n}\right|

exists, allowing L=+∞L=+\infty. Then:

  • If L<1L<1, the series is absolutely convergent: ∑∣an∣\sum |a_n| converges, and therefore so does ∑an\sum a_n.
  • If L>1L>1, including L=+∞L=+\infty, the series diverges because its terms do not tend to zero.
  • If L=1L=1, the test is inconclusive.

The absolute value is essential when terms can be negative or complex. The test compares their magnitudes, not their signs or complex phases.

Changing or removing finitely many terms does not affect convergence. Consequently, finitely many zero terms or exceptional initial ratios do not prevent its application. If zero terms occur infinitely often, however, the quotient formulation cannot be applied directly to the full sequence.

Principle and proof

The ratio test works by comparing the tail of a series with a geometric series.

Convergence when L<1L<1

Choose a number qq such that

L<q<1.L<q<1.

By the definition of a limit, there is an index NN such that

∣an+1an∣≤q(n≥N).\left|\frac{a_{n+1}}{a_n}\right|\le q \qquad(n\ge N).

Repeated application gives

∣aN+k∣≤∣aN∣qk(k≥0).|a_{N+k}|\le |a_N|q^k \qquad(k\ge 0).

Hence

∑k=0∞∣aN+k∣≤∣aN∣∑k=0∞qk=∣aN∣1−q.\sum_{k=0}^{\infty}|a_{N+k}| \le |a_N|\sum_{k=0}^{\infty}q^k =\frac{|a_N|}{1-q}.

The comparison test therefore establishes absolute convergence.

Divergence when L>1L>1

Choose qq with 1<q<L1<q<L. If L=+∞L=+\infty, any fixed q>1q>1 can be used. Eventually,

∣an+1∣≥q∣an∣,|a_{n+1}|\ge q|a_n|,

so

∣aN+k∣≥∣aN∣qk.|a_{N+k}|\ge |a_N|q^k.

The magnitudes grow without bound, rather than approaching zero. Since convergence of a series requires an→0a_n\to 0, the series diverges.

This divergence conclusion is stronger than merely failing to establish absolute convergence: the original signed or complex series itself cannot converge.

Examples

Factorials in the denominator

For a fixed complex number zz, consider

∑n=0∞znn!.\sum_{n=0}^{\infty}\frac{z^n}{n!}.

When z≠0z\neq 0, the factorial identity (n+1)!=(n+1)n!(n+1)!=(n+1)n! gives

∣zn+1/(n+1)!zn/n!∣=∣z∣n+1⟶0.\left| \frac{z^{n+1}/(n+1)!}{z^n/n!} \right| =\frac{|z|}{n+1}\longrightarrow 0.

Thus the series converges absolutely for every zz. When z=0z=0, convergence is immediate. This is the power-series representation of the exponential function.

Factorials in the numerator

For

∑n=1∞n!3n,\sum_{n=1}^{\infty}\frac{n!}{3^n},

the successive-term ratio is

(n+1)!/3n+1n!/3n=n+13⟶+∞.\frac{(n+1)!/3^{n+1}}{n!/3^n} =\frac{n+1}{3}\longrightarrow+\infty.

The series diverges. Although its initial terms decrease, their eventual growth determines the result.

A limiting ratio of one

For every real pp,

lim⁡n→∞(n+1)−pn−p=lim⁡n→∞(nn+1)p=1.\lim_{n\to\infty} \frac{(n+1)^{-p}}{n^{-p}} = \lim_{n\to\infty}\left(\frac{n}{n+1}\right)^p =1.

Yet the series

∑n=1∞1np\sum_{n=1}^{\infty}\frac{1}{n^p}

converges for p>1p>1 and diverges for p≤1p\le 1.

Similarly, ∑n=1∞(−1)n−1/n\sum_{n=1}^{\infty}(-1)^{n-1}/n has absolute successive-term ratios tending to 11, but is conditionally convergent. Thus a limiting ratio of 11 is compatible with absolute convergence, conditional convergence, or divergence.

Versions without a ratio limit

Existence of a ratio limit is sufficient but not necessary for geometric comparison. Assuming the terms are eventually nonzero:

  • If some q<1q<1 satisfies

    ∣an+1an∣≤q\left|\frac{a_{n+1}}{a_n}\right|\le q

    for every sufficiently large nn, the series converges absolutely.

  • If

    ∣an+1an∣≥1\left|\frac{a_{n+1}}{a_n}\right|\ge 1

    for every sufficiently large nn, the magnitudes are eventually nondecreasing and bounded below by a positive number, so the series diverges.

Using the limit superior and limit inferior, useful sufficient conditions are

lim sup⁡n→∞∣an+1an∣<1⟹absolute convergence,\limsup_{n\to\infty}\left|\frac{a_{n+1}}{a_n}\right|<1 \quad\Longrightarrow\quad \text{absolute convergence},

and

lim inf⁡n→∞∣an+1an∣>1⟹divergence.\liminf_{n\to\infty}\left|\frac{a_{n+1}}{a_n}\right|>1 \quad\Longrightarrow\quad \text{divergence}.

A limit superior greater than 11 alone does not establish divergence. Large upward jumps can be offset by larger downward jumps.

Application to power series

For a power series

∑n=0∞cn(z−z0)n,\sum_{n=0}^{\infty}c_n(z-z_0)^n,

suppose the coefficients are eventually nonzero and

ℓ=lim⁡n→∞∣cn+1cn∣\ell=\lim_{n\to\infty}\left|\frac{c_{n+1}}{c_n}\right|

exists. For z≠z0z\neq z_0, the ratio of successive term magnitudes tends to

ℓ∣z−z0∣.\ell|z-z_0|.

If 0<ℓ<∞0<\ell<\infty, the radius of convergence is therefore

R=1ℓ.R=\frac{1}{\ell}.

The series converges absolutely when ∣z−z0∣<R|z-z_0|<R and diverges when ∣z−z0∣>R|z-z_0|>R. On the boundary ∣z−z0∣=R|z-z_0|=R, the ratio test is inconclusive and convergence must be examined separately.

If ℓ=0\ell=0, the radius is infinite. If ℓ=+∞\ell=+\infty, the radius is zero, and the series converges only at its center. These applications are important for Taylor series and series solutions of differential equations.

Relationship to the root test

The root test examines

ρ=lim sup⁡n→∞∣an∣1/n.\rho=\limsup_{n\to\infty}|a_n|^{1/n}.

It establishes absolute convergence when ρ<1\rho<1 and divergence when ρ>1\rho>1.

When the successive absolute ratios have a limit LL, the nnth roots also tend to LL, so the two tests agree. The root test can nevertheless succeed when the ratio test is inconclusive. For example, define

a2k=4−k,a2k+1=4−k(k≥0).a_{2k}=4^{-k}, \qquad a_{2k+1}=4^{-k} \qquad(k\ge 0).

The successive ratios alternate between 11 and 1/41/4. Their limit does not exist, and their limit superior is 11. However,

lim⁡n→∞∣an∣1/n=12,\lim_{n\to\infty}|a_n|^{1/n}=\frac12,

so the root test establishes convergence.

The ratio test is often algebraically simpler for factorials and products, whereas the root test is especially convenient for terms containing nnth powers.