A protostar is a young, growing star that forms as gas collapses under gravity within a dense interstellar cloud. It contains a central, pressure-supported object that gains material from its surroundings, usually through a rotating disk, and is often deeply embedded in a dusty envelope. Its luminosity comes mainly from accretion and gravitational contraction rather than sustained core hydrogen fusion. In the usual terminology for low-mass stars, the protostellar phase ends when the surrounding envelope has largely dispersed and substantial envelope-fed growth has ceased; the resulting young star may still take millions of years to reach the main sequence.
Formation from a molecular cloud
Protostars form in cold, dense regions of molecular clouds, where much of the hydrogen exists as molecules. Such regions typically have temperatures of roughly 10–20 kelvin, although conditions vary. Collapse begins when gravity overcomes the combined support provided by gas pressure, internal motions, and magnetic fields. Turbulence can both oppose collapse and create local concentrations of gas that become gravitationally unstable.
Early in the collapse, radiation escapes relatively efficiently, allowing the gas to remain nearly constant in temperature while its density increases. As the central region becomes opaque to its own thermal radiation, cooling becomes less effective and the gas heats up. In the standard picture of low-mass star formation, this produces a temporary pressure-supported structure called the first hydrostatic core.
When the central temperature reaches approximately 2,000 kelvin, molecular hydrogen begins to dissociate. Dissociation absorbs energy that would otherwise increase the pressure, permitting a second rapid collapse. Once most hydrogen molecules in the central region have dissociated, pressure can again halt the collapse, producing the second hydrostatic core, generally identified with the initial stellar core of the protostar.
The surrounding cloud does not all collapse directly onto this central object. Even modest initial rotation becomes important as material moves inward because of conservation of angular momentum. Much of the infalling gas therefore enters an accretion disk, from which it can gradually reach the protostar.
Structure and energy supply
A protostellar system commonly contains several connected components:
- Central protostar: a hot, dense, approximately pressure-supported object whose mass and internal structure evolve as it accretes.
- Circumstellar disk: rotating gas and dust that transport material inward while redistributing angular momentum.
- Infalling envelope: a larger reservoir of gas and dust that feeds the disk and central object.
- Outflows and cavities: material expelled from the inner system, often along the rotation axis, which excavates openings through the envelope.
These components evolve together. The central object may be close to mechanical balance even while the larger envelope remains in gravitational collapse.
Accretion and contraction
Accretion releases gravitational potential energy as matter falls toward the protostar. A characteristic estimate of the available accretion luminosity is
where is the gravitational constant, is the protostellar mass, is the accretion rate, and is the protostellar radius. The fraction radiated by the disk, the accretion shock, or the stellar surface depends on the geometry of the flow and on how much energy the accreted gas carries into the star.
The protostar also radiates energy as its interior contracts and changes structure. Its radius need not shrink continuously: rapid accretion and changes in internal heat transport can cause substantial swelling, especially in models of massive protostars.
Nuclear reactions
A protostar is not necessarily an object in which no nuclear fusion occurs. Fusion involving deuterium, an isotope of hydrogen, can begin at central temperatures of order one million kelvin. Deuterium burning influences the object's internal structure but does not establish the long-lived state characteristic of an ordinary hydrogen-burning star.
The defining energy source of a main-sequence star is sustained core hydrogen fusion. For low-mass objects, the end of the embedded protostellar phase generally precedes this condition. Massive objects can begin sustained hydrogen burning while still accreting, so “protostar” and “not yet hydrogen-burning” are not universally interchangeable descriptions.
Disks, jets, and outflows
Material in a disk cannot move inward efficiently unless angular momentum is transported elsewhere. Magnetic stresses, gravitational torques, and interactions with outflows can contribute to this transport. Disks that become sufficiently massive relative to their central objects may develop spiral structures or fragment, potentially contributing to the formation of companions.
Many protostars produce narrow jets and broader bipolar outflows. Models commonly link their launching to rotating, magnetized gas in the inner disk or near the stellar surface. These flows remove mass and angular momentum and transfer energy to the surrounding cloud.
Where fast-moving ejecta strike surrounding gas, they can produce luminous shock structures known as Herbig–Haro objects. Slower, more extensive molecular outflows can be traced through molecular line emission. Jets and outflows are related but are not identical: a fast jet may entrain ambient material and help drive a broader flow.
Accretion is often variable rather than steady. Material may accumulate in the disk and then reach the star in episodes of enhanced accretion. Such bursts can change the system's brightness and heat its surrounding dust and gas.
Observational classification
Embedded protostars are difficult to observe in visible light because dust absorbs much of their radiation and re-emits it at longer wavelengths. They are therefore studied especially through infrared, submillimetre, and millimetre observations.
Young stellar objects are commonly assigned observational classes based on the distribution of their radiation across wavelength—their spectral energy distribution. These classes broadly trace evolution, but they are not exact age labels.
| Class | Typical characteristics | Usual interpretation |
|---|---|---|
| Class 0 | Strong emission from cold dust; a substantial envelope; the envelope commonly contains more mass than the central object | Very early, deeply embedded protostellar phase |
| Class I | Significant infrared emission from an envelope and disk; continued accretion from surrounding material | More evolved embedded protostar |
| Flat-spectrum | An approximately flat infrared spectral slope under a specified convention | A heterogeneous group that can include transitional systems and objects affected by viewing geometry |
| Class II | Infrared excess mainly associated with a circumstellar disk; little substantial envelope | Usually a disk-bearing pre-main-sequence star |
| Class III | Weak infrared excess and little remaining warm circumstellar dust | Usually a more exposed pre-main-sequence star |
The spectral slope used in infrared classification is often expressed as
where is the observed flux density per unit wavelength. Numerical class boundaries depend on the wavelength interval and classification convention.
Observational classes should be distinguished from physical stages, which describe the relative importance of the star, disk, and envelope. A disk viewed edge-on can resemble a more embedded object, while an outflow cavity viewed nearly along its axis can make an embedded system appear less obscured. Foreground dust also affects classification.
Evolution and timescales
For low-mass stars in nearby star-forming regions, the embedded protostellar phase generally lasts several hundred thousand years, with estimates commonly of order half a million years. These values are population-based estimates, not a universal clock. They depend on assumptions about star-formation history, object selection, and the correspondence between observed classes and physical stages.
As accretion and outflows deplete or disperse the envelope, the central object becomes increasingly exposed. It then enters the pre-main-sequence phase in the narrower evolutionary usage. Low-mass examples include T Tauri stars; more massive pre-main-sequence objects include Herbig Ae/Be stars. A residual disk can persist after envelope dispersal and provide material for planet formation.
The time required to reach sustained core hydrogen fusion depends strongly on mass. A star with approximately the mass of the Sun takes tens of millions of years from its early formation to reach the main sequence. More massive stars evolve much faster and can begin hydrogen fusion before accretion ends.
Objects that finish forming below the minimum mass required for sustained ordinary hydrogen fusion become brown dwarfs rather than main-sequence stars. Their early formation can resemble that of low-mass stars, although terminology varies for these substellar precursors.
Observation and interpretation
Different measurements reveal different parts of a protostellar system:
- Continuum emission from dust constrains the distribution of material, although inferred masses depend on assumed dust properties and temperatures.
- Molecular spectroscopy probes gas composition, temperature, and motion.
- Doppler shifts reveal rotation, infall, and outflow, subject to ambiguities caused by viewing geometry and overlapping gas structures.
- Interferometry resolves compact disks, jets, and multiple systems that may appear blended in lower-resolution observations.
- Repeated observations reveal luminosity changes and the motions of outflow features.
No single measurement usually determines a protostar's mass, age, or accretion history uniquely. Luminosity includes contributions from the central object, disk, and accretion, while dust redistributes the emitted radiation. Unresolved companions further complicate interpretation.
An important observational issue is the protostellar luminosity problem: many low-mass protostars appear less luminous than simple models with steady accretion would predict. Variable or episodic accretion can account for part of the discrepancy, but inferred luminosities and model predictions also depend on stellar properties, viewing geometry, and observational selection.
Development of the concept
The modern protostar concept developed from theoretical studies of gravitational collapse and stellar contraction, together with observations of young stars associated with interstellar clouds. Infrared astronomy made deeply obscured objects accessible, while millimetre observations revealed cold envelopes, molecular outflows, and rotating gas.
The observational classification framework developed alongside these advances. Class I, II, and III categories organized young stellar objects by their infrared properties; Class 0 was subsequently introduced to identify particularly young, deeply embedded sources prominent at longer wavelengths. High-resolution imaging and spectroscopy have since made it possible to test the physical structure behind these categories, including disk formation, multiplicity, and the coupling between accretion and outflow.