Polonium is a chemical element with the symbol Po and atomic number 84. It is a silvery-gray, radioactive solid belonging to group 16 of the periodic table, the chalcogens. All its isotopes are radioactive. It occurs naturally in minute quantities within radioactive decay series, especially that of uranium-238. Discovered in 1898 by Marie and Pierre Curie, polonium was named after Poland, Marie Curie’s homeland. Its best-known isotope, polonium-210, is a powerful source of alpha radiation and has specialized scientific and industrial uses.
Discovery and naming
Marie Curie investigated the radioactivity of uranium minerals and found that some, notably pitchblende, were more radioactive than their uranium content alone could explain. This suggested that they contained additional, previously unknown radioactive elements.
Marie and Pierre Curie chemically separated fractions of pitchblende and followed their radioactivity through successive treatments. A strongly radioactive fraction behaved chemically like bismuth. In July 1898, they announced evidence for a new element and proposed the name polonium, after Poland, which at the time was partitioned among neighboring powers.
The original identification depended on radioactivity and chemical separation rather than the isolation of a visible quantity of pure metal. Polonium’s scarcity and continuous radioactive decay made its preparation and characterization exceptionally difficult. The discovery nevertheless helped establish that minerals could contain elements detectable through their nuclear properties even when conventional chemical analysis struggled to identify them.
Position in the periodic table and physical properties
Polonium lies below tellurium in group 16, which also includes oxygen, sulfur, and selenium. Unlike the lighter members of the group, it is generally classified as a metal, although some classifications emphasize its position near the boundary between metals and metalloids.
Its ground-state electron configuration is:
Selected properties are:
| Property | Value or description |
|---|---|
| Symbol | Po |
| Atomic number | 84 |
| Period and group | Period 6, group 16 |
| Appearance | Silvery-gray metal |
| Density near room temperature | Approximately |
| Melting point | Approximately |
| Boiling point | Approximately |
| Common oxidation states | and ; occurs in polonides |
Because polonium has no stable isotopes and no characteristic terrestrial isotopic composition, it has no standard atomic weight. Periodic tables commonly display [209], referring to the mass number of its longest-lived known isotope rather than to an abundance-weighted atomic mass.
Polonium has two well-established crystalline forms at ordinary pressure. The low-temperature form, alpha-polonium, has a simple cubic structure, an unusual arrangement among elemental solids. Above roughly , beta-polonium, with a rhombohedral structure, becomes stable. These names describe crystal forms and should not be confused with alpha and beta radiation.
Strong radioactive self-heating complicates measurements of polonium’s physical properties. In polonium-210, the heat released by decay can be substantial even for very small samples.
Isotopes and radioactive decay
Polonium has no stable isotope. Its longest-lived known isotope, polonium-209, has a half-life of about 125 years. Polonium-208 has a half-life of about 2.9 years, while polonium-210 has a half-life of approximately 138.4 days.
Polonium-210 decays almost entirely through alpha decay to stable lead-206:
The emitted helium nucleus is an alpha particle. Its kinetic energy is approximately , expressed in millions of electronvolts. Much of this energy becomes heat when the particle is stopped by surrounding matter.
A pure polonium-210 sample has a specific activity of approximately decays per second per gram and generates roughly 140 watts of thermal power per gram. These properties arise from the combination of a relatively short half-life and an energetic decay.
Other polonium isotopes occupy important positions in natural decay series. Polonium-214 and polonium-218 occur in the uranium-238 series, while polonium-212 and polonium-216 occur in the thorium-232 series. Some are extremely short-lived: polonium-212, for example, has a half-life of roughly microseconds.
Chemistry
Polonium’s chemistry resembles that of tellurium and bismuth in several respects. The oxidation states and are particularly important, although other states are known. Its behavior depends strongly on the chemical environment.
Known compounds include polonium dioxide, , and halides such as polonium tetrachloride, . In polonides, polonium combines with more electropositive elements and is formally assigned the oxidation state .
Chemical investigation is unusually demanding because:
- Only small quantities are generally available.
- Radioactive decay changes the sample’s composition over time.
- Self-heating can affect experimental conditions.
- Radiation can decompose solvents or alter surrounding materials through radiolysis.
- Trace quantities can be lost through adsorption on vessel surfaces.
Consequently, polonium chemistry often requires methods suited to trace concentrations rather than conventional bulk-material experiments.
Natural occurrence and production
Any polonium present when Earth formed has long since decayed. Natural polonium exists because it is continually regenerated from longer-lived radioactive parents.
Polonium-210 is produced within the uranium-238 decay series. In its immediate ancestry, lead-210 decays to bismuth-210, which undergoes beta decay to polonium-210. The relatively long half-life of lead-210, about 22 years, provides a continuing source of polonium-210 in environmental materials.
Natural polonium occurs in uranium-bearing minerals and at trace levels in soils, water, air, and organisms. Atmospheric transport of decay products of radon helps distribute it beyond the rocks in which the original uranium occurs. Its environmental distribution also depends on attachment to particles, deposition, and biological uptake.
Modern supplies of polonium-210 are generally produced by neutron irradiation of bismuth in nuclear reactors, followed by radioactive decay and chemical separation. This route replaced extraction from uranium ores as the practical source for specialized applications.
Applications
Static elimination
Polonium-210 has been used in devices that reduce static electrical charge. Its alpha particles cause ionization in nearby air, producing charged particles that help neutralize accumulated charge on surfaces. Such devices have been used in specialized industrial processes, although radioactive-source regulation and the isotope’s short half-life limit their convenience.
Neutron sources
When alpha particles from polonium interact with beryllium, nuclear reactions can produce neutrons. Polonium–beryllium sources were historically important in nuclear physics and in some early nuclear technologies. Their output declines rapidly as polonium-210 decays, and other neutron-source technologies have largely displaced them.
Heat sources
The high heat output of polonium-210 led to its use in some specialized radioisotope heat sources, including early space applications. Its short half-life limits it to relatively short missions or operating periods: both heat output and activity fall to half their initial values in about 138 days. Longer-lived radionuclides are more suitable for systems intended to operate for many years.
Environmental research
Polonium isotopes are useful tracers of particle transport and biological processes. In ocean research, differences between the behavior of lead-210 and polonium-210 help investigate particle scavenging, biological uptake, and the movement of organic matter out of surface waters.
These applications depend not simply on radioactive decay but also on the different chemical affinities of the parent and daughter elements. Interpretation therefore requires accounting for transport, biological cycling, and departures from radioactive equilibrium.
Radiation hazards and detection
Polonium-210 presents a serious internal radiation hazard. Alpha particles have little penetrating power and are stopped by the outer layer of intact skin, but they deposit energy densely over very short distances. If polonium enters the body through inhalation, ingestion, or a wound, its radiation can damage nearby tissues.
The distinction between external irradiation and internal contamination is therefore essential. Low penetration does not mean low hazard, and a contaminated object can create an exposure pathway even when radiation is difficult to detect from a distance.
Polonium-210 emits very little penetrating gamma radiation. Instruments designed primarily to detect gamma rays may therefore be poorly suited to finding it. Specialized measurements commonly use alpha-sensitive detectors or alpha spectrometry, often after chemical separation from other substances.
Its high activity, potential for contamination, and changing isotopic composition restrict handling to appropriately controlled facilities. These same properties explain why polonium remains a specialized research and industrial material rather than a metal with broad commercial uses.