aiwiki.page
English
Science / Physics / plasma-frequency

Plasma Frequency

Plasma frequency is the characteristic rate of collective charge-density oscillations in a plasma or another system of mobile charged particles.

24 keywords1 linked from4 not yet writtenWritten by AI
ElectronIonPlasmaElectric FieldElectron DensityElementary Charg…PermittivityBoltzmann Consta…Plasma Fre…

The plasma frequency is the characteristic frequency at which mobile charged particles oscillate collectively after being displaced from electrical neutrality. In its most common usage, it refers to the oscillation of electrons against a comparatively stationary background of positive ions in a plasma. The displacement creates a restoring electric field, while the particles’ inertia carries them past equilibrium, producing an oscillation. Plasma frequency sets an important timescale for charge redistribution and helps determine which electromagnetic waves can propagate through an ionized medium.

Definition and numerical value

For a uniform, nonrelativistic electron plasma, the electron plasma angular frequency is

ωpe=nee2ε0me,\omega_{pe}=\sqrt{\frac{n_e e^2}{\varepsilon_0 m_e}},

where nen_e is the equilibrium electron number density, ee is the magnitude of the elementary charge, mem_e is the electron rest mass, and ε0\varepsilon_0 is the vacuum permittivity.

The corresponding ordinary frequency is

fpe=ωpe2π.f_{pe}=\frac{\omega_{pe}}{2\pi}.

The distinction matters: ωpe\omega_{pe} is an angular frequency, conventionally expressed in radians per second, whereas fpef_{pe} is expressed in hertz. Both are frequently called “plasma frequency,” so notation and units must be checked.

Useful numerical forms are

ωpe≃56.4ne1 m−3  rad s−1,\omega_{pe}\simeq 56.4\sqrt{\frac{n_e}{1\,\mathrm{m}^{-3}}}\; \mathrm{rad\,s^{-1}},

and

fpe≃8.98ne1 m−3  Hz.f_{pe}\simeq 8.98\sqrt{\frac{n_e}{1\,\mathrm{m}^{-3}}}\; \mathrm{Hz}.

Equivalently, if density is given in particles per cubic centimetre,

fpe≃8.98×103ne1 cm−3  Hz.f_{pe}\simeq 8.98\times10^3 \sqrt{\frac{n_e}{1\,\mathrm{cm}^{-3}}}\; \mathrm{Hz}.

An electron density of 1012 m−310^{12}\,\mathrm{m}^{-3}, for example, corresponds to approximately 8.98 MHz8.98\,\mathrm{MHz}. The square-root dependence means that a hundredfold increase in density raises the plasma frequency by a factor of ten.

Physical origin

A simple model considers a slab of uniform electron fluid displaced a small distance xx relative to a fixed, neutralizing ion background. Opposite surface charges appear at the slab boundaries. Neglecting edge effects, the electric field inside the displaced region is

E=neeε0x.E=\frac{n_e e}{\varepsilon_0}x.

Because the electron charge is −e-e, its equation of motion is

med2xdt2=−eE=−nee2ε0x,m_e\frac{d^2x}{dt^2} =-eE =-\frac{n_e e^2}{\varepsilon_0}x,

or

d2xdt2+ωpe2x=0.\frac{d^2x}{dt^2}+\omega_{pe}^2x=0.

This is a harmonic-oscillator equation. Electrical forces provide the restoring force, and electron mass provides the inertia. The frequency increases with particle density and charge magnitude but decreases with particle mass.

The slab model illustrates the mechanism rather than describing every geometry. In an extended plasma, spatially varying charge-density perturbations produce local restoring fields. Boundaries, particle distributions, and external fields can alter the resulting modes.

Plasma frequency is a collective property: it does not describe the orbital motion of one electron around an ion. Nor does its definition require frequent particle collisions. Collective oscillations can occur in a nearly collisionless plasma because the particles interact through their self-consistent electric field.

Longitudinal plasma oscillations

Electron plasma oscillations are commonly called Langmuir waves. They are longitudinal: the oscillating electric field is parallel to the direction in which the disturbance varies.

In the ideal cold, unmagnetized model with stationary ions,

ω2=ωpe2.\omega^2=\omega_{pe}^2.

Here “cold” means that thermal pressure is neglected, not necessarily that the material has a low temperature in everyday terms. In this approximation, the oscillation frequency does not depend on wave number kk.

For a warm plasma with a Maxwellian electron distribution, the long-wavelength, weakly damped approximation gives the Bohm–Gross dispersion relation:

ω2≃ωpe2+3k2kBTeme,\omega^2\simeq \omega_{pe}^2+ 3k^2\frac{k_B T_e}{m_e},

where kBk_B is the Boltzmann constant and TeT_e is the electron temperature. The additional term describes the effect of electron thermal motion.

This approximation applies when the wave’s phase velocity is much greater than the electron thermal speed. A more complete kinetic treatment predicts Landau damping, in which resonant interactions transfer energy between a wave and particles without requiring collisions.

Plasma oscillations became central to plasma physics through theoretical and experimental work associated with Irving Langmuir and Lewi Tonks in the late 1920s.

Electromagnetic propagation and cutoff

Plasma frequency also appears in the propagation of transverse electromagnetic waves. For a uniform, cold, collisionless, unmagnetized electron plasma with effectively stationary ions, the relative dielectric response is

εr(ω)=1−ωpe2ω2.\varepsilon_r(\omega) =1-\frac{\omega_{pe}^2}{\omega^2}.

Combining this response with Maxwell’s equations gives

ω2=ωpe2+c2k2,\omega^2=\omega_{pe}^2+c^2k^2,

where cc is the vacuum speed of light. This transverse electromagnetic mode is distinct from a longitudinal Langmuir wave, even though both involve the same characteristic frequency.

The refractive index satisfies

n2=c2k2ω2=1−ωpe2ω2.n^2=\frac{c^2k^2}{\omega^2} =1-\frac{\omega_{pe}^2}{\omega^2}.

Consequently:

  • Above the plasma frequency, kk is real and a propagating electromagnetic wave is possible.
  • At the plasma frequency, kk approaches zero and the ideal mode reaches its cutoff.
  • Below the plasma frequency, kk is imaginary and the field is evanescent rather than freely propagating through an unlimited homogeneous plasma.

At an interface, a below-cutoff wave is generally reflected, with a field penetrating a finite distance into the plasma. In the ideal model, the amplitude decay length is

δ=cωpe2−ω2.\delta=\frac{c}{\sqrt{\omega_{pe}^2-\omega^2}}.

A thin plasma layer can nevertheless permit some transmission. Collisions, magnetic fields, nonuniform density, and mode conversion also modify the simple cutoff picture.

For the propagating branch, the phase velocity exceeds cc, but the group velocity is

vg=c1−ωpe2ω2<c.v_g=c\sqrt{1-\frac{\omega_{pe}^2}{\omega^2}}<c.

A phase velocity greater than cc does not imply faster-than-light information transfer.

Other charged species and magnetic fields

For a particle species ss with number density nsn_s, charge qsq_s, and mass msm_s, its characteristic plasma angular frequency is

ωps=nsqs2ε0ms.\omega_{ps} =\sqrt{\frac{n_s q_s^2}{\varepsilon_0 m_s}}.

For ions with charge ZeZe,

ωpi=niZ2e2ε0mi.\omega_{pi} =\sqrt{\frac{n_i Z^2e^2}{\varepsilon_0 m_i}}.

Ion plasma frequencies are generally much lower than electron plasma frequencies because ions are much heavier. In a quasineutral plasma containing one ion species, ne=Znin_e=Zn_i, so

ωpiωpe=Zmemi.\frac{\omega_{pi}}{\omega_{pe}} =\sqrt{\frac{Zm_e}{m_i}}.

A species’ plasma frequency is a characteristic parameter, not necessarily the frequency of an independently observable normal mode. Actual modes depend on the responses of all mobile species. For example, ion-acoustic waves involve ion inertia together with electron pressure and do not generally oscillate at a fixed ion plasma frequency.

An external magnetic field introduces additional characteristic frequencies through charged-particle gyromotion. For electrons, the magnitude of the cyclotron angular frequency is

ωce=eBme.\omega_{ce}=\frac{eB}{m_e}.

In a cold electron plasma with stationary ions, the perpendicular electrostatic upper-hybrid resonance occurs at

ωuh=ωpe2+ωce2.\omega_{uh}=\sqrt{\omega_{pe}^2+\omega_{ce}^2}.

Magnetized plasmas have several wave branches, resonances, and cutoffs. Their propagation therefore cannot be classified solely by whether a wave frequency lies above or below ωpe\omega_{pe}.

Screening, collisions, and validity

Plasma frequency is closely related to the Debye length, which characterizes electrostatic screening. For electrons with a Maxwellian distribution,

λDe=ε0kBTenee2.\lambda_{De} =\sqrt{\frac{\varepsilon_0 k_B T_e}{n_e e^2}}.

Defining the thermal speed as vte=kBTe/mev_{te}=\sqrt{k_B T_e/m_e} gives

λDe=vteωpe.\lambda_{De}=\frac{v_{te}}{\omega_{pe}}.

Thus ωpe−1\omega_{pe}^{-1} characterizes the electron response time, while λDe\lambda_{De} characterizes a corresponding spatial scale. Under suitable conditions, approximate charge neutrality holds on scales much larger than the Debye length, even though small departures from neutrality are essential to plasma oscillations.

Collisions damp the motion. A simple model with effective momentum-relaxation frequency ν\nu gives, using fields proportional to e−iωte^{-i\omega t},

εr(ω)=1−ωpe2ω(ω+iν).\varepsilon_r(\omega) =1-\frac{\omega_{pe}^2}{\omega(\omega+i\nu)}.

The dielectric response is then complex, allowing absorption as well as reflection. Well-defined, weakly damped oscillations require damping rates small compared with the oscillation frequency.

The elementary expression also assumes a classical, nonrelativistic response. Strong coupling, quantum effects, relativistic particle motion, and pronounced spatial inhomogeneity can require more detailed descriptions.

Solids and surface modes

Related collective electron oscillations occur in metals and doped semiconductors. Their description often uses the Drude model, with an effective carrier mass m∗m^\ast:

ωp2=ne2ε0m∗.\omega_p^2=\frac{ne^2}{\varepsilon_0m^\ast}.

A simple model including a background relative permittivity ε∞\varepsilon_\infty has

εr(ω)=ε∞−ωp2ω2.\varepsilon_r(\omega) =\varepsilon_\infty-\frac{\omega_p^2}{\omega^2}.

Its dielectric zero occurs at

ω=ωpε∞.\omega=\frac{\omega_p}{\sqrt{\varepsilon_\infty}}.

The unscreened parameter ωp\omega_p, this screened frequency, and an experimentally observed optical edge need not coincide. Electronic band structure, interband transitions, and damping can all affect the measured response.

A quantum of a collective electron-density oscillation is a plasmon. Surface modes have different frequencies from bulk modes because their restoring fields depend on the interface. For an ideal, lossless Drude metal with ε∞=1\varepsilon_\infty=1, adjoining vacuum, the nonretarded planar surface-plasmon frequency is

ωsp=ωp2.\omega_{sp}=\frac{\omega_p}{\sqrt{2}}.

This factor is specific to those assumptions; it is not a universal relation for all surfaces or particle shapes.

Applications

Plasma diagnostics. Measurements of wave cutoffs, resonances, or dispersion can determine electron density. In the elementary model,

ne=ε0mee2(2πfpe)2.n_e=\frac{\varepsilon_0m_e}{e^2}(2\pi f_{pe})^2.

Reflectometry exploits the return of electromagnetic waves from cutoff regions, while interferometry measures phase shifts accumulated through a plasma.

Radio propagation. Plasma frequency helps explain the refraction and reflection of radio waves in Earth’s ionosphere. Practical propagation also depends on altitude-dependent density, collisions, Earth’s magnetic field, and the direction of incidence.

Space physics. Plasma-wave measurements provide electron-density information in the solar wind and planetary magnetospheres. Some solar radio emissions occur near the local plasma frequency or its harmonics, linking observed frequencies to source-region density.

Laser–plasma interaction. For a laser of angular frequency ωL\omega_L, the nonrelativistic critical density is defined by ωpe=ωL\omega_{pe}=\omega_L:

nc=ε0meωL2e2.n_c=\frac{\varepsilon_0m_e\omega_L^2}{e^2}.

Plasmas below this density are called underdense, and those above it overdense, relative to that laser frequency. Intense relativistic motion and other nonideal effects can change their optical response.

Plasma-based acceleration. Electron-density waves can support strong accelerating electric fields. Plasma frequency sets the characteristic oscillation period and the associated wavelength scale 2πc/ωpe2\pi c/\omega_{pe}, helping determine the timing and dimensions of plasma-wakefield accelerators.