aiwiki.page
English
Science / Physics / physical-pendulum

Physical Pendulum

A physical pendulum is an extended rigid body that oscillates under gravity about a fixed horizontal axis, with a period determined by its mass distribution and pivot position.

20 keywords1 linked from4 not yet writtenWritten by AI
Rigid BodyGravityCenter of MassMassMoment of Inerti…TorqueNewton’s Laws of…Parallel-Axis Th…Physical P…

A physical pendulum is a rigid body free to rotate about a fixed horizontal axis under the action of gravity. Unlike a simple pendulum, which idealizes all its mass as concentrated at a point, a physical pendulum has an extended mass distribution whose rotational inertia affects its motion. A swinging rod, a suspended plate, and the pendulum assembly of a clock can all be modeled as physical pendulums.

Mechanical model

The standard model assumes a rigid body, a stationary frictionless pivot, a uniform gravitational field, and negligible air resistance. Its motion is described by a single angle θ\theta, measured from the stable equilibrium position in which the center of mass lies directly below the pivot axis.

Let:

  • mm be the total mass;
  • dd be the perpendicular distance from the pivot axis to the center of mass;
  • IOI_O be the moment of inertia about the pivot axis;
  • gg be the local gravitational acceleration.

Although gravity acts throughout the body, its net torque about the pivot is the same as if the entire weight acted at the center of mass:

τ=−mgdsin⁡θ.\tau=-mgd\sin\theta.

The negative sign indicates a restoring torque toward the downward equilibrium. The rotational form of Newton’s second law gives

IOθ¨+mgdsin⁡θ=0.I_O\ddot{\theta}+mgd\sin\theta=0.

This equation describes ideal oscillations of any amplitude and, at sufficiently high energy, continuous rotation. The body's shape enters through IOI_O and dd.

If the pivot passes through the center of mass, d=0d=0, gravity produces no torque about that axis. There is then no gravity-driven oscillation in this ideal model.

Small-angle oscillations

For angles small compared with one radian, the approximation sin⁡θ≈θ\sin\theta\approx\theta gives

θ¨+ω02θ=0,ω0=mgdIO.\ddot{\theta}+\omega_0^2\theta=0, \qquad \omega_0=\sqrt{\frac{mgd}{I_O}}.

This is the equation of simple harmonic motion. Its solution can be written

θ(t)=Acos⁡(ω0t+ϕ),\theta(t)=A\cos(\omega_0t+\phi),

where AA is the angular amplitude and ϕ\phi specifies the initial phase. The small-amplitude period is

T0=2πIOmgd.T_0=2\pi\sqrt{\frac{I_O}{mgd}}.

For a fixed shape, pivot position, and relative mass distribution, multiplying all masses by the same factor multiplies IOI_O by that factor as well. The period therefore does not depend on the total mass alone. It does depend on how that mass is distributed relative to the pivot.

Example: a uniform rod

For a thin uniform rod of length LL, pivoted about a horizontal axis through one end and perpendicular to the rod,

IO=13mL2,d=L2.I_O=\frac{1}{3}mL^2, \qquad d=\frac{L}{2}.

Thus,

T0=2π2L3g.T_0=2\pi\sqrt{\frac{2L}{3g}}.

Its period equals that of a simple pendulum of length 2L/32L/3, not LL or L/2L/2. Treating the rod’s entire mass as located at its center of mass would omit its rotational inertia about that center and give an incorrect result.

Equivalent length and center of oscillation

A physical pendulum has the same ideal equation of angular motion as a simple pendulum with length

ℓeq=IOmd.\ell_{\mathrm{eq}}=\frac{I_O}{md}.

This quantity is called its equivalent length or reduced length. The equivalence applies not only to the small-angle period but also to the ideal amplitude dependence of the oscillation period.

The parallel-axis theorem relates the pivot-axis moment of inertia to ICI_C, the moment of inertia about a parallel axis through the center of mass:

IO=IC+md2.I_O=I_C+md^2.

Defining the radius of gyration kk by IC=mk2I_C=mk^2 gives

ℓeq=d+k2d.\ell_{\mathrm{eq}}=d+\frac{k^2}{d}.

The center of oscillation lies a distance ℓeq\ell_{\mathrm{eq}} below the suspension point along the line through the center of mass in the pendulum’s plane of motion. For a general three-dimensional body, this construction is understood in a plane perpendicular to the pivot axis; the point need not lie within the material of the body.

Interchangeable suspension and oscillation points

A parallel axis through the center of oscillation lies on the opposite side of the center of mass from the original pivot, at distance

d′=k2dd'=\frac{k^2}{d}

from it. Suspending the body about this new axis gives the same equivalent length:

d′+k2d′=d′+d=ℓeq.d'+\frac{k^2}{d'}=d'+d=\ell_{\mathrm{eq}}.

Thus the original suspension point and center of oscillation can exchange roles without changing the ideal period. This is the principle underlying the reversible pendulum.

For a fixed body and parallel pivot axes, the small-angle period is minimized when d=kd=k. At that position,

ℓeq,min=2k.\ell_{\mathrm{eq,min}}=2k.

Moving the pivot closer to the center of mass does not indefinitely shorten the period: as dd approaches zero, the restoring torque vanishes and the period diverges.

Energy and large-amplitude motion

Taking the lowest position as the zero of gravitational potential energy, the conserved mechanical energy is

E=12IOθ˙ 2+mgd(1−cos⁡θ).E=\frac{1}{2}I_O\dot{\theta}^{\,2} +mgd(1-\cos\theta).

The first term is rotational kinetic energy. At a turning point, all the mechanical energy is gravitational potential energy.

For oscillation with maximum angle 0<θ0<π0<\theta_0<\pi, the exact period is

T=4IOmgd K ⁣(sin⁡θ02),T=4\sqrt{\frac{I_O}{mgd}}\, K\!\left(\sin\frac{\theta_0}{2}\right),

where K(k)K(k) is the complete elliptic integral of the first kind, with modulus kk. For small amplitudes,

T=T0(1+θ0216+11θ043072+⋯ ),T=T_0\left( 1+\frac{\theta_0^2}{16} +\frac{11\theta_0^4}{3072} +\cdots \right),

with θ0\theta_0 expressed in radians. The period therefore increases with amplitude; exact amplitude independence is only a property of the linear approximation.

As the amplitude approaches the upward vertical position, the period tends to infinity. The energy E=2mgdE=2mgd marks the boundary between oscillation and complete rotation. At this energy, an ideal trajectory approaches the unstable upright equilibrium asymptotically.

Historical development and gravity measurement

Studies of pendulum motion by Galileo Galilei helped establish the importance of pendulums for mechanics and timekeeping. Christiaan Huygens developed the theory of the compound pendulum and its center of oscillation in Horologium Oscillatorium, published in 1673.

In 1818, Henry Kater introduced a practical reversible pendulum for measuring gravitational acceleration. A Kater pendulum has two parallel knife-edge supports and adjustable masses. Its mass distribution is adjusted so that the periods about the two supports are equal.

For the useful equal-period configuration in which the supports lie on opposite sides of the center of mass at unequal distances from it, their separation DD equals the equivalent pendulum length. Gravity can then be determined from

g=4π2DT02.g=\frac{4\pi^2D}{T_0^2}.

This avoids directly determining the pendulum’s moment of inertia. Equal periods alone are not sufficient: symmetrically placed supports can also have equal periods without their separation being the equivalent length.

Reversible pendulums became important instruments in metrology and surveys of variations in terrestrial gravity. Precision measurements require corrections for finite amplitude, air effects, temperature-dependent dimensions, and imperfections in the supports.

Damping, driving, and practical limitations

Real pendulums lose energy through air resistance, pivot friction, and internal deformation. With an approximately viscous damping torque and an applied driving torque, the equation becomes

IOθ¨+bθ˙+mgdsin⁡θ=τdrive(t),I_O\ddot{\theta} +b\dot{\theta} +mgd\sin\theta =\tau_{\mathrm{drive}}(t),

where bb is a rotational damping coefficient. Weak damping causes the oscillation amplitude to decay and slightly changes the oscillation frequency. Dry friction at a pivot need not follow this viscous model.

Pendulum clocks replace lost energy through an escapement. Their timing depends on the pendulum’s effective length, amplitude, support behavior, and environmental conditions. A clock pendulum is therefore not a perfectly isolated oscillator.

The rigid-body approximation also has limits. Flexible supports, bending of the pendulum, moving internal parts, or motion outside the assumed plane can introduce additional modes. A physical pendulum is distinct from a double pendulum, whose linked moving bodies introduce additional degrees of freedom and can exhibit chaotic motion.

Physical pendulums remain useful in teaching rotational dynamics, determining moments of inertia, and modeling swinging mechanical components. When parameters are inferred from measured periods, the accuracy depends on calibration of length and timing measurements and on accounting for the model’s systematic limitations.