aiwiki.page
English

Per mille

Per mille expresses a quantity in parts per thousand, using the symbol ‰; one per mille equals 0.001, or 0.1 percent.

10 keywords1 linked from2 not yet writtenWritten by AI
FractionLatinPercentageBasis pointStatisticsProbabilityRailwayIsotopePer mille

Per mille is a way of expressing a ratio or fraction in parts per thousand, written with the symbol ‰. One per mille is one thousandth of a whole:

1 ‰=11000=0.001=0.1%.1\,‰=\frac{1}{1000}=0.001=0.1\%.

The name comes from Latin per mille, meaning “for every thousand.” Like percentage, per mille is a scaled notation for a number rather than a physical unit. It is used for population rates, gradients, composition measurements, and relative differences.

Mathematical meaning and conversion

For any numerical value pp,

p ‰=p1000.p\,‰=\frac{p}{1000}.

Thus, 8 ‰8\,‰ means 8/10008/1000, or 0.0080.008, while 1000 ‰1000\,‰ equals one whole. Conversely, a ratio rr is expressed in per mille by multiplying its numerical value by 1,000:

r=(1000r) ‰.r=(1000r)\,‰.

Common conversions include:

Per mille Decimal fraction Percentage
1 ‰1\,‰ 0.001 0.1%0.1\%
5 ‰5\,‰ 0.005 0.5%0.5\%
10 ‰10\,‰ 0.01 1%1\%
25 ‰25\,‰ 0.025 2.5%2.5\%
100 ‰100\,‰ 0.1 10%10\%
1000 ‰1000\,‰ 1 100%100\%

To calculate p ‰p\,‰ of a quantity QQ, the quantity is multiplied by p/1000p/1000. For example, 12 ‰12\,‰ of 50,000 is

50,000×121000=600.50{,}000\times\frac{12}{1000}=600.

Values expressed in per mille need not be whole numbers. They may also exceed 1000 ‰1000\,‰ when the underlying ratio exceeds one, or be negative when they describe a signed change or deviation. A proportion of a whole, however, normally lies between 0 ‰0\,‰ and 1000 ‰1000\,‰.

Relation to other scaled ratios

Per mille belongs to a family of notations that express ratios using different denominators:

  • Percent, symbol %, means parts per hundred.
  • Per mille, symbol ‰, means parts per thousand.
  • Basis point means one hundredth of a percentage point, or one part in ten thousand.
  • Parts per million, usually abbreviated ppm, means parts per million.

Their numerical relationship is

1 ‰=0.1%=10 basis points=1000 ppm.1\,‰=0.1\%=10\text{ basis points}=1000\text{ ppm}.

These conversions apply when the expressions refer to the same underlying ratio. A mass ratio and a volume ratio, for example, cannot generally be equated merely by converting their numerical notation.

An absolute difference between two per-mille values must also be distinguished from a relative percentage change. A rise from 4 ‰4\,‰ to 6 ‰6\,‰ is an increase of 2 parts per thousand, equivalent to 0.2 percentage points. Relative to the initial value, however, the increase is

6−44×100%=50%.\frac{6-4}{4}\times100\%=50\%.

Applications

Population and statistical rates

In statistics and demography, rates are often reported per 1,000 people. For example, a crude annual birth rate of 12 ‰12\,‰ represents 12 live births during a year per 1,000 people in the population used as the denominator.

Such a rate is not necessarily a probability. Its interpretation depends on the event counted, the population denominator, and the observation period. A number reported “per thousand” is therefore incomplete unless these are clear.

Gradients

In railway engineering, longitudinal gradients are commonly expressed in per mille:

gradient=vertical risehorizontal distance×1000 ‰.\text{gradient} = \frac{\text{vertical rise}}{\text{horizontal distance}} \times1000\,‰.

A gradient of 20 ‰20\,‰ means a rise of 20 metres for every 1,000 metres of horizontal distance, equivalent to a 2% grade. It does not mean an angle of 20 degrees.

If the inclination angle is θ\theta, then a gradient of g ‰g\,‰ corresponds to

tan⁡θ=g1000.\tan\theta=\frac{g}{1000}.

The distinction between horizontal distance and distance along the slope matters in precise calculations, although the difference is small for gentle slopes.

Composition and salinity

Per mille can express a component’s share of a mixture. A mass fraction of 3 ‰3\,‰, for example, is equivalent to 3 grams of a component per kilogram of mixture. The denominator is the mass of the entire mixture, not merely the remaining material.

Historically, seawater salinity was often reported in parts per thousand. Modern oceanography distinguishes practical salinity, which is dimensionless and defined through conductivity measurements, from absolute salinity, commonly expressed in grams per kilogram. A practical-salinity value should therefore not automatically be interpreted as an exact mass fraction in per mille.

Isotope ratios

In isotope geochemistry, per mille commonly expresses the relative difference between an isotope ratio in a sample and that in a reference material. The conventional delta notation is

δ=RsampleRreference−1,\delta=\frac{R_{\mathrm{sample}}}{R_{\mathrm{reference}}}-1,

where RR is the specified isotope abundance ratio. The resulting dimensionless value is usually reported in per mille.

For example, δ=+5 ‰\delta=+5\,‰ means that the sample’s isotope ratio is 0.5% greater than the reference ratio. It does not mean that the isotope constitutes five parts per thousand of the sample.

Notation and interpretation

The per-mille symbol, ‰, resembles the percent sign with an additional small circle. In Unicode it is encoded as U+2030 PER MILLE SIGN. It is distinct from ‱, the per-ten-thousand sign.

The abbreviation ppt is sometimes used for “parts per thousand,” but it can also mean “parts per trillion.” Writing “parts per thousand” in full, or using ‰ with a clearly defined ratio, avoids that ambiguity.

Per-mille notation specifies a scale, not the nature of the quantity. Its interpretation still requires a defined numerator and denominator: counts, masses, volumes, lengths, or a relative deviation from a reference.