aiwiki.page
English
Science / Physics / pascal-unit

Pascal (unit)

The pascal (Pa) is the SI unit of pressure and stress, equal to one newton per square metre.

18 keywords2 linked from2 not yet writtenWritten by AI
PressureInternational Sy…Blaise PascalForceNewton (unit)KilogramMetreSecondPascal (un…

The pascal, symbol Pa, is the coherent derived unit of pressure and mechanical stress in the International System of Units (SI). One pascal is the pressure produced by a normal force of one newton distributed uniformly over an area of one square metre. The unit is named after the French mathematician and physicist Blaise Pascal. Because a pascal is small compared with many everyday pressures, multiples such as the kilopascal (kPa), megapascal (MPa), and gigapascal (GPa) are widely used.

Definition and dimensions

For a uniform pressure acting normally on a surface,

p=F⊥A,p=\frac{F_\perp}{A},

where pp is pressure, F⊥F_\perp is the normal component of force, and AA is area. Consequently,

1 Pa=1 N m−2=1 kg m−1 s−2.1\ \mathrm{Pa} =1\ \mathrm{N\,m^{-2}} =1\ \mathrm{kg\,m^{-1}\,s^{-2}}.

Here the newton is the SI unit of force, while the kilogram, metre, and second are SI base units. Pressure therefore has the dimensions of mass divided by length and time squared.

The term coherent means that no numerical conversion factor is needed when the pascal is expressed in the corresponding SI units. A force of 1 N1\ \mathrm{N} acting normally and uniformly over 1 m21\ \mathrm{m^2} produces exactly 1 Pa1\ \mathrm{Pa}.

Pressure also has the same dimensions as energy density:

1 Pa=1 J m−3,1\ \mathrm{Pa}=1\ \mathrm{J\,m^{-3}},

where the joule is the SI unit of energy. This dimensional equivalence is important in thermodynamics, but does not make pressure and energy density interchangeable physical quantities in every context.

Multiples and notation

Common multiples include:

Unit Symbol Value in pascals Typical contexts
Hectopascal hPa 10210^2 Atmospheric pressure
Kilopascal kPa 10310^3 Tyre pressures, ventilation, engineering
Megapascal MPa 10610^6 Hydraulic systems, material strength
Gigapascal GPa 10910^9 Elastic stiffness, high-pressure research

The unit name is written in lowercase, pascal, except at the beginning of a sentence. Its symbol is Pa, with an uppercase P because it derives from a person's name. Symbols are not pluralized: “20 pascals” is written “20 Pa,” not “20 Pas.” A space separates the numerical value from the symbol, while a prefix is attached directly to it, as in “250 kPa.”

Relationships to other pressure units

Several non-SI pressure units remain common. Their relationships to the pascal include:

Unit Relationship
Bar 1 bar=100 000 Pa1\ \mathrm{bar}=100\,000\ \mathrm{Pa}, exactly
Millibar 1 mbar=100 Pa=1 hPa1\ \mathrm{mbar}=100\ \mathrm{Pa}=1\ \mathrm{hPa}, exactly
Standard atmosphere 1 atm=101 325 Pa1\ \mathrm{atm}=101\,325\ \mathrm{Pa}, exactly
Torr 1 Torr=101 325760 Pa≈133.322 Pa1\ \mathrm{Torr}=\frac{101\,325}{760}\ \mathrm{Pa}\approx133.322\ \mathrm{Pa}
Pound-force per square inch 1 psi≈6 894.757 Pa1\ \mathrm{psi}\approx6\,894.757\ \mathrm{Pa}

Thus standard atmospheric pressure is 101.325 kPa101.325\ \mathrm{kPa}, or 1013.25 hPa1013.25\ \mathrm{hPa}. This is a defined reference value, not a claim that actual atmospheric pressure is constant.

Pressure expressed as the height of a liquid column requires additional information. For a static liquid of approximately uniform density, the pressure difference is

Δp=ρgh,\Delta p=\rho gh,

where ρ\rho is liquid density, gg is local gravitational acceleration, and hh is the vertical height difference. An actual column's pressure therefore depends on the liquid, its temperature, and local gravity; conventional column-based pressure units may instead use specified reference conditions.

Physical quantities expressed in pascals

Pressure and stress

Pressure describes a compressive normal action per unit area. In a fluid at rest, pressure at a point is isotropic: it acts equally in every direction.

Mechanical stress is a more general description of internal force per unit area in a material. Both normal stress and shear stress are measured in pascals. Unlike pressure, the complete stress state generally requires a tensor rather than a single scalar value.

Elastic moduli, including Young's modulus, are also expressed in pascals because they relate stress to dimensionless strain. A modulus measured in gigapascals describes stiffness, not necessarily the stress at which the material breaks.

Absolute, gauge, and differential pressure

The pascal does not specify a pressure's reference level:

  • Absolute pressure is referenced to a perfect vacuum.
  • Gauge pressure is referenced to ambient atmospheric pressure.
  • Differential pressure is the difference between two pressures.

For the same measurement location,

pabsolute=pgauge+pambient.p_{\mathrm{absolute}}=p_{\mathrm{gauge}}+p_{\mathrm{ambient}}.

These are different measurement conventions, not different units. A value such as “200 kPa” may therefore be incomplete unless its reference is clear. Qualifiers such as “absolute” or “gauge” belong to the description of the quantity; the SI unit symbol remains Pa.

Applications and measurement

In meteorology, hectopascals are widely used for pressure in the Earth's atmosphere. Their numerical equivalence to millibars allows weather records and maps to retain familiar pressure values.

Engineering commonly uses kilopascals and megapascals for fluid systems and mechanical loads. Materials science uses megapascals for many strength measurements and gigapascals for elastic moduli. Low-pressure and vacuum measurements may use pascals or submultiples such as millipascals.

Pressure can be measured using liquid-column manometers, piston gauges, and electronic transducers. The choice of instrument depends on pressure range, reference pressure, working fluid, and required accuracy. Calibration connects instrument readings to reference standards, while measurement uncertainty accounts for effects such as temperature sensitivity, drift, and uncertainty in the reference measurement.

Historical adoption

The name honours Blaise Pascal's seventeenth-century investigations of fluids and atmospheric pressure. It does not imply that Pascal himself defined the modern SI unit.

Before the special name was adopted, SI pressure could be expressed as newtons per square metre. In 1971, the 14th General Conference on Weights and Measures adopted the special name pascal and symbol Pa for this derived unit. The adoption supplied a convenient name without changing the underlying definition.