aiwiki.page
English
Science / Physics / particle-in-a-box

Particle in a Box

The particle in a box is an exactly solvable quantum model in which spatial confinement produces discrete energy levels and standing-wave states.

28 keywords3 linked fromWritten by AI
Quantum Mechanic…Wave FunctionSchrödinger Equa…Energy Quantizat…MassPotential EnergyHamiltonian Oper…Planck ConstantParticle i…

The particle in a box is an idealized model in quantum mechanics describing a particle confined to a region by impenetrable boundaries, with no forces acting in its interior. Despite the absence of an interior force, the allowed energies are discrete because the particle’s wave function must satisfy boundary conditions. The model is one of the simplest exact solutions of the Schrödinger equation and illustrates spatial confinement, energy quantization, and the difference between classical and quantum descriptions of motion.

The term usually refers to an infinite potential well, particularly a one-dimensional interval. Finite wells and boxes in two or three dimensions are closely related extensions.

One-dimensional model

Consider a nonrelativistic particle of mass mm confined between x=0x=0 and x=Lx=L. Its potential energy is defined as

V(x)={0,0<x<L,+∞,x≤0 or x≥L.V(x)= \begin{cases} 0, & 0<x<L,\\ +\infty, & x\leq 0\ \text{or}\ x\geq L. \end{cases}

The infinite potential is a mathematical idealization: the particle cannot enter the exterior region. The wave function vanishes outside the box and obeys

ψ(0)=ψ(L)=0.\psi(0)=\psi(L)=0.

Inside the box, the Hamiltonian operator contains only the kinetic-energy term:

H^=−ℏ22md2dx2,\hat H=-\frac{\hbar^2}{2m}\frac{d^2}{dx^2},

where ℏ=h/(2π)\hbar=h/(2\pi) and hh is the Planck constant. The time-independent Schrödinger equation becomes

−ℏ22md2ψdx2=Eψ.-\frac{\hbar^2}{2m}\frac{d^2\psi}{dx^2}=E\psi.

Although the particle is free in the interior, its states are not those of a particle free to move over all space. The boundaries are essential to the problem.

Wave functions and energy levels

For positive energy, the interior solution has the form

ψ(x)=Asin⁡(kx)+Bcos⁡(kx),k=2mEℏ.\psi(x)=A\sin(kx)+B\cos(kx), \qquad k=\frac{\sqrt{2mE}}{\hbar}.

The boundary condition at x=0x=0 requires B=0B=0. The condition at x=Lx=L then requires

sin⁡(kL)=0,kL=nπ,\sin(kL)=0, \qquad kL=n\pi,

where n=1,2,3,…n=1,2,3,\ldots. Normalization gives the energy eigenfunctions

ψn(x)=2Lsin⁡(nπxL),0<x<L,\psi_n(x)=\sqrt{\frac{2}{L}} \sin\left(\frac{n\pi x}{L}\right), \qquad 0<x<L,

with energies

En=n2π2ℏ22mL2=n2h28mL2.E_n=\frac{n^2\pi^2\hbar^2}{2mL^2} =\frac{n^2h^2}{8mL^2}.

These are standing waves with wavelengths

λn=2Ln.\lambda_n=\frac{2L}{n}.

Only an integer number of half-wavelengths fits between the walls. This boundary requirement—not a variation of the potential inside the box—produces the discrete spectrum.

The integer nn labels each energy eigenstate. The state n=1n=1 is the ground state, and higher values describe excited states. Each ψn\psi_n has n−1n-1 interior nodes, where the probability density is zero. The one-dimensional energy levels are nondegenerate: each energy corresponds to one independent spatial eigenfunction.

Ground-state energy and confinement scale

There is no nontrivial n=0n=0 state: it would give a wave function that is zero everywhere and therefore cannot be normalized. The lowest energy is consequently positive:

E1=π2ℏ22mL2.E_1=\frac{\pi^2\hbar^2}{2mL^2}.

This is an example of zero-point energy. It is consistent with the uncertainty principle: a particle confined to a finite interval cannot have both a definite position and identically zero momentum.

The characteristic confinement energy scales as

En∝1mL2.E_n\propto \frac{1}{mL^2}.

A narrower box or a lighter particle therefore produces larger energy spacings. For an electron in a one-dimensional box of width 1 nm1\,\mathrm{nm}, the ground-state energy is approximately 0.376 eV0.376\,\mathrm{eV}, using the free-electron mass.

Unlike the equally spaced spectrum of the quantum harmonic oscillator, adjacent box levels become progressively farther apart:

En+1−En=π2ℏ22mL2(2n+1).E_{n+1}-E_n =\frac{\pi^2\hbar^2}{2mL^2}(2n+1).

Probability and time evolution

According to the Born rule, the position probability density in an energy eigenstate is

∣ψn(x)∣2=2Lsin⁡2(nπxL).|\psi_n(x)|^2 =\frac{2}{L}\sin^2\left(\frac{n\pi x}{L}\right).

This distribution is generally not uniform. In the ground state it is largest at the center and vanishes at the walls. Excited states have additional nodes and peaks. These peaks are probabilities for finding the particle, not a trajectory along which the particle moves.

The expectation value of position is the center of the box for every energy eigenstate:

⟨x⟩n=L2.\langle x\rangle_n=\frac{L}{2}.

The corresponding time-dependent state is

Ψn(x,t)=ψn(x)e−iEnt/ℏ.\Psi_n(x,t)=\psi_n(x)e^{-iE_nt/\hbar}.

Its probability density is independent of time because the time-dependent factor has unit magnitude. Such a state is called a stationary state.

A general pure state is a superposition of energy eigenstates:

Ψ(x,t)=∑n=1∞cnψn(x)e−iEnt/ℏ,∑n=1∞∣cn∣2=1.\Psi(x,t)=\sum_{n=1}^{\infty} c_n\psi_n(x)e^{-iE_nt/\hbar}, \qquad \sum_{n=1}^{\infty}|c_n|^2=1.

Its position distribution generally changes with time through interference between components of different energies. An energy measurement yields EnE_n with probability ∣cn∣2|c_n|^2.

Momentum and kinetic energy

In a stationary box state, the mean momentum is zero, while

⟨p2⟩n=(nπℏL)2.\langle p^2\rangle_n =\left(\frac{n\pi\hbar}{L}\right)^2.

Thus zero mean momentum does not imply zero kinetic energy:

⟨T⟩n=⟨p2⟩n2m=En.\langle T\rangle_n =\frac{\langle p^2\rangle_n}{2m} =E_n.

The standing wave can be expressed inside the box as a combination of oppositely directed traveling-wave factors. Nevertheless, a box energy eigenstate is not an eigenstate of momentum. Momentum as an observable on a bounded interval involves operator-domain subtleties; the standing-wave decomposition alone does not specify the outcomes of every possible momentum-measurement procedure.

Comparison with classical motion

In classical mechanics, a particle moving freely between perfectly reflecting walls travels at constant speed between collisions. Its energy can take any nonnegative value. If its position is sampled uniformly in time over many traversals, the position distribution is uniform.

The quantum model differs in several ways:

  • Energy is restricted to discrete values.
  • The ground-state energy is nonzero.
  • Stationary-state position distributions contain peaks and nodes.
  • A state need not correspond to a particle following a definite path between the walls.

For large nn, the probability density oscillates rapidly. Averaging over regions containing many oscillations gives approximately 1/L1/L, the classical uniform distribution. This is a coarse-grained correspondence, not pointwise convergence of the quantum density. Likewise, although absolute energy gaps increase with nn, their size relative to the energy decreases:

En+1−EnEn=2n+1n2⟶0.\frac{E_{n+1}-E_n}{E_n} =\frac{2n+1}{n^2} \longrightarrow 0.

Boxes in higher dimensions

For a rectangular three-dimensional box with side lengths Lx,Ly,LzL_x,L_y,L_z, the wave function separates into three one-dimensional factors:

ψnxnynz(x,y,z)=8LxLyLzsin⁡(nxπxLx)sin⁡(nyπyLy)sin⁡(nzπzLz),\psi_{n_xn_yn_z}(x,y,z) = \sqrt{\frac{8}{L_xL_yL_z}} \sin\left(\frac{n_x\pi x}{L_x}\right) \sin\left(\frac{n_y\pi y}{L_y}\right) \sin\left(\frac{n_z\pi z}{L_z}\right),

where each quantum number is a positive integer. The energy is

Enxnynz=π2ℏ22m(nx2Lx2+ny2Ly2+nz2Lz2).E_{n_xn_yn_z} = \frac{\pi^2\hbar^2}{2m} \left( \frac{n_x^2}{L_x^2} +\frac{n_y^2}{L_y^2} +\frac{n_z^2}{L_z^2} \right).

For a cube of side LL,

Enxnynz=π2ℏ22mL2(nx2+ny2+nz2).E_{n_xn_yn_z} = \frac{\pi^2\hbar^2}{2mL^2} (n_x^2+n_y^2+n_z^2).

Different spatial states can then have the same energy. For example, (1,1,2)(1,1,2), (1,2,1)(1,2,1), and (2,1,1)(2,1,1) are distinct states with equal energy. This is spatial degeneracy; any degeneracy associated with spin is separate.

Changing the box geometry changes both the spectrum and its degeneracies. Circular, spherical, or irregular boundaries require different mathematical solutions.

Finite walls and alternative boundary conditions

Real confining barriers have finite heights. In a finite square well, a bound-state wave function extends into the barriers and decays there rather than vanishing abruptly. For the same interior width and potential reference, corresponding bound-state energies lie below those of the infinite well because the particle is less tightly confined.

A finite well has only a finite number of bound states below its exterior potential. Above that threshold, unbound states are possible. If a barrier also has finite thickness and an accessible region beyond it, quantum tunneling can permit escape. An infinite wall, by contrast, has no penetration or transmission.

Boundary conditions must therefore be specified along with the interior potential. Periodic boundary conditions, in which opposite edges are identified, describe a different system. In one dimension they permit a constant zero-momentum state and should not be confused with hard-wall confinement.

Applications and limitations

Electronic and optical models

The model provides a first approximation to confined electrons in nanoscale systems. Semiconductor quantum wells confine carriers mainly in one direction, quantum wires in two, and quantum dots in three. Their spectra depend on geometry, finite barriers, and material properties; semiconductor calculations often replace the free-electron mass with an effective mass.

In elementary molecular models, delocalized electrons along a conjugated chain can be approximated as particles in a one-dimensional box. Increasing the effective length reduces the characteristic energy spacing, helping explain why longer conjugated systems often absorb lower-energy light. Quantitative predictions require more realistic molecular orbital theory.

The model also illustrates transitions studied in spectroscopy. If a transition between states nn and mm occurs through absorption or emission of a photon, energy conservation requires

hν=∣Em−En∣.h\nu=|E_m-E_n|.

An energy difference alone does not guarantee an allowed transition. For the ideal one-dimensional box, electric-dipole transitions between distinct spatial states require m+nm+n to be odd.

Many-particle systems

Noninteracting particles can be placed in the box’s single-particle states to construct simple many-particle models. For spin-12\tfrac12 fermions, the Pauli exclusion principle allows at most two particles in each spatial state when the two spin states are available. Filling these levels underlies elementary treatments of the Fermi energy and Fermi–Dirac statistics.

Such constructions are important in statistical mechanics, but they do not by themselves account for interactions among particles.

Scope of the idealization

The standard box assumes a single nonrelativistic particle, a uniform interior potential, perfectly rigid impenetrable walls, and no coupling to an environment. Real systems may require finite barriers, nonuniform potentials, particle interactions, spin-dependent effects, or relativistic dynamics.

Its exact solutions make it useful as a benchmark for numerical methods and perturbation theory. Its central physical result—the emergence of an energy scale proportional to ℏ2/(mL2)\hbar^2/(mL^2)—remains useful even when realistic confinement differs substantially from an ideal rectangular box.